Used Wood Heating System, Wood Chip for sale (45,019)

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed) Kledpsw Rpdrjfx Ampor

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Kljdoyalblepfx Ampjr

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Kodpfx Ajyhlrmempjlr

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. Kedsxwhw Aspfx Ampelr BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small commercial buildings, or agricultural applications. It is suitable for operation with wood chips and pellets, offers modular output and fully automatic operation, all within a space-saving design. ⸻ Kodswahhvjpfx Ampolr Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, fuel feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility.

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Wood Chip Heating System Kledpfemuzq Eex Amper The MAWERA biomass boiler with a rated thermal output of 470 kW is ideal for industrial and agricultural heating systems with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are the hallmarks of this boiler. — Technical Data: • Fuel: Wood chips, sawdust, wood shavings • Rated thermal output: 470 kW • Combustion system:   ◦ Feed auger for fuel supply   ◦ Combustion chamber with heat-resistant fireclay lining • Control & Air Supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-controlled regulation with flue gas and combustion chamber sensors • Boiler construction:   ◦ Water-cooled boiler with generously sized heat exchanger surfaces   ◦ Front and rear fire doors for easy access and maintenance — Price: 6,500 EUR net Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán)

Condition: used, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. Ksdpettqd Nefx Ampslr — Key features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust design for continuous operation • KWB – Austrian innovation in biomass heating PRICE: 4,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings.

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity Klsdpev Ngq Asfx Ampor already disassembled complete with boiler, stocker unit, and discharge system

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) Klsdpfx Amjr R Ewlopor - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 Kledpeyrhd Tjfx Ampjr If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Ksdpfx Amovvmvfopelr

Condition: used, Wood chip screening plant Chip screening plant Width 1,9m Length 5.3m Height 0.8m 1st grid 40x40mm 2nd grid 15x15xmm Double scraper for screening system Total length 7.5m (2m straight, 5m upwards) Outer flange width 760x610mm Scraper width 400mm + 250mm Gear motor 4 kW Klodetxblkepfx Ampsr Speed 39 rpm

Condition: used, Year of construction: 2014, This Holzstar chip extraction unit, type: SAA 3003, is being auctioned in our online industrial/machinery auction due to the ContiTech Transportsysteme site closure. Kedpjyz Sh Nsfx Ampolr

Condition: used, Well-functioning wood dust extraction system. Kjdeyzw Eaepfx Ampelr

Condition: used, Year of construction: 2023, tank capacity: 100,000 l, GENERAL Equipment: Venting/air release Design: Horizontal Year of manufacture: 2023 Notes: Manhole diameter approx. 600 mm; includes optical leak detector, tank fitting for heating oil, overfill prevention device, and ladder with working platform; External diameter: 2,900 mm Total length: 16,050 mm Heating/cooling: present Location: External storage Minden Technical documentation: Drawing, various documents Nameplate: Volume: 100,000 liters Product-contact material: Steel Condition: used Cylindrical length: 14,960 mm Last application: Heating oil TANK Support type: Saddles welded on HEATING/COOLING JACKET Internal temperature control: Immersion heater Kledpfx Ajyckwqsmper EQUIPMENT Manhole / dome: on the tank

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic Kjdpfxjyt Ihbe Ampjlr • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed Klodpsuq Iy Rofx Amper

Condition: good (used), Year of construction: 2010, functioning wood gasification plant with 40 kw electric power and 80 kw heat output Kljdpfx Asiggpbsmpor

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer Kedpfx Ameyizqnspjlr

Year of construction: 1990, condition: good (used), Throwing fan ideal for wood chips, with feed conveyor belt approximately 3 m long. Blade span 900 mm, equipped with 11 kW motor. Kodpfxjyy Uzco Ampolr

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150°C or just water Max. thermal output up to 850 kW Kedpfx Aoy Dfd Nempelr Suitable for dry material

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230A Wood Chip and Dust Extractor + 2.5 m Hose The CORMAK FM230A dust extractor is a high-performance chip extraction fan designed for efficient removal of wood chips, shavings, and wood dust generated during woodworking processes. This compact chip extractor is ideal for carpentry workshops, production facilities, and home workshops where effective dust extraction from workstations is essential. The model is equipped with a flexible extraction hose with a length of 2.5 m, allowing quick connection to woodworking machines such as planers, table saws, milling machines, and thickness planers. Thanks to this, the chip extraction system can be easily positioned anywhere in the workshop, ensuring effective removal of dust and chips directly from the source. The powerful extraction fan generates an airflow of up to 1080 m³/h, ensuring fast and efficient suction of wood chips and dust. The solid construction and metal impeller provide stable operation, high durability, and reliability even during intensive use in a woodworking workshop. The mobile design with transport wheels allows convenient movement of the unit between workstations, while the bag filtration system effectively separates air from wood chips. As a result, the wood dust extraction system helps maintain cleanliness in the workshop and improves both comfort and workplace safety. Key Advantages extraction hose included – 2.5 m Ø100 mm Ksdpjytn Tdefx Ampolr high suction capacity – up to 1080 m³/h efficient fan for chips and wood shavings single-phase motor 0.75 kW / 230 V durable metal impeller mobile construction with transport wheels efficient filtration system for chips and wood dust large waste bag enabling long operating time compact design ideal for woodworking workshops Applications The CORMAK FM230A chip and dust extractor is designed to work with many woodworking machines that require effective dust extraction: jointers and planers thickness planers table saws spindle moulders wood sanders Thanks to the high airflow performance, the dust and chip extractor effectively removes contaminants generated during woodworking, improving visibility at the workstation and reducing the amount of dust in the air. Standard Equipment CORMAK FM230A dust extractor extraction hose Ø100 mm – 2.5 m filter bag waste collection bag mounting clamps mobile base with wheels Technical Specifications Parameter Value Motor power 0.75 kW Power supply 230 V / 50 Hz Extraction capacity 1080 m³/h Motor speed 2800 rpm Vacuum pressure 1000 Pa Noise level 68 dB Number of bags 2 Suction inlet diameter 100 mm Hose length 2.5 m Bag capacity 90 L Height 1800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal output modulation —— Technical data: • Year of manufacture: 2012 • Output: 102–109 kW • Firing capacity: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water content: 190 liters • Weight: approx. 1010 kg —— Key features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-adjusted) • Automatic cleaning and ash removal • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic (self-cleaning) grate • Very low power consumption (~0.18 kW) • Modern, energy-efficient system —— Feed technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with automatic pellet suction system (vacuum system / pneumatic feed) ➡️ Pellet operation is very straightforward: • Connection to pellet storage with flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual refueling ➡️ Alternatively, the boiler can also be used for wood chip operation (by connecting a discharge/feeding system for chip storage) Klodoy A Ei Nepfx Ampor —— Condition: • Recently dismantled • In perfect working order until removal —— Viewing: Viewing possible by appointment at our 1500 m² warehouse in Mosonmagyaróvár, Hungary

Condition: good (used), Year of construction: 2004, We are selling a used system of recycling machines with the following components (year of manufacture 2004): - Chip crusher type RS 300 E with coarse parts outlet (Steimel) - Scraper belt conveyor with torque switch-off (DGS) Klsdpfx Amori N D Ispsr - Chip centrifuge AZ - 250 with feed hopper (ARP) - Vacuum lock VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve - Switch cabinet The system is fully functional and ready for collection

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating Kodpfxeb Evnke Ampolr A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request