Used Wmw P 48 for sale (44,615)

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t Lhjdpfou Ix Hdox Ad Ajf dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: used, mileage: 243,600 km, power: 353 kW (479.95 HP), first registration: 12/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: grey, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, IVECO S-WAY long-haul tractor unit with prepared PTO, Long Distance Driver's Cab with one bed, ZF Intarder, automatic climate control, stationary air conditioning, auxiliary heater, external sun visor, luxury air-sprung driver's seat (heated and ventilated), electric windows (double), electrically adjustable and heated exterior mirrors, side sun blinds for driver and passenger, roof and side spoilers, ABS, disc brakes with EBS, adaptive cruise control with collision warning and emergency braking function, lane departure warning system, traction control, ESP, central lubrication, 12-speed transmission type 12 TX 2210 TD, PTO prepared (hydraulic system available on request at extra cost), 640 + 480 litre aluminium fuel tanks, 135 litre AdBlue tank, digital tachograph, full LED headlights with LED taillights, work lights, battery master switch, on-board computer, IVECO-Connect fleet management with navigation system, multifunction steering wheel, central locking with remote control, refrigerator, reverse warning system, external storage compartments left and right, rear axle load indicator, air-suspended rear axle, rear axle diff-lock, wheelbase 3790 mm, gross combination weight 44,000 kg, first owner, well-maintained workshop condition, good overall condition, ORIGINAL MILEAGE (verifiable), NOT a rental vehicle, Euro 6E engine, low noise, German vehicle with German documents, not a low-liner or mega tractor unit! Sale to business customers only! All information without guarantee! Subject to errors and prior sale! Lhedpfjyk N Aujx Ad Aof

Condition: used, machine/vehicle number: 337 G 06 0008, Year of construction: 1996, fuel type: electric, lifting capacity: 4800 kg Lifting height: 3850 mm Lhodpfx Adjdqdvre Aef Free lift: 1590 mm Battery: 80 V, 805 Ah Operating time: 5 h Sideshift adjustment Unladen weight: 4800 kg Tyres: 4 wheels, solid rubber Length: 3100 mm width: 1500 mm Height: 2700 mm

Condition: used, Year of construction: 2004, Linde Electric Lhjdpfx Asyx Hc Aed Aef Model: E 48 P 02 Load capacity: 5 tons Year of manufacture: 2004 Cable: 2.40 meters Height: approx. 3.50 meters Side shift Tires approx. 65% Battery up to 35%

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Stroke of table: 800mm - Documentation available: No - CE certificate present: No - Serial number: 31577 - Drive system: Conventional - Grinding diameter [mm]: 315 - X-axis travel [mm]: 800 - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information Ljdpfswya A Sjx Ad Ashf VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1991, Table clamping surface: 710 x 400 mm Tool holder: ISO 40 Travel paths: X-axis: 400 mm Y-axis: 350 mm Additionally displaceable in Y-axis: 420 mm Z-axis: 380 mm Quill stroke: 80 mm Speed range: 45 – 2240 rpm Feed range, stepless: 6.3 – 1250 mm/min Rapid traverse: 1250 mm/min Ljdoupiypepfx Ad Ashf Drive power: 2.2 / 2.8 kW Dimensions (L x W x H): 1400 x 1600 x 1850 mm Weight: 1900 kg Accessories / Special Features: • 3-axis digital readout by HEIDENHAIN • Vertical and horizontal milling spindle • Vertical milling head with quill, tiltable right and left • Stepless feed • Rapid traverse on all 3 axes • Fixed angle table • Coolant system • Chip tray • Spindle clamping by push button, e.g., for tool change • Machine feet • Central lubrication • Control panel • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Ljdpfx Aomi Rpied Aohf 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: good (used), Year of construction: 1975, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, ram plate width: 500 mm, ram plate length: 630 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Lhsdoy Emv Aopfx Ad Asf Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Lhsdpfxjy Emvps Ad Asf Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, Technical details: weight: 1900 kg 2 x steady rests for WMW DP2 No.1 & No.2 price per piece * Lhjdpeyyb Ntsfx Ad Aof

Condition: good (used), functionality: fully functional, pressing force: 25 t, stroke length: 500 mm, table width: 500 mm, table length: 500 mm, distance table to ram: 800 mm, total height: 2,700 mm, overall weight: 2,000 kg, Equipment: documentation/manual, Available for sale: 1 used hydraulic press Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Nominal pressing force: 25 MP Ram stroke: 500 mm Lsdsxfzdlopfx Ad Ajhf Maximum distance between table and ram: 800 mm Table: 500 x 500 mm Documentation included

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Lsdpfjyvt H Ajx Ad Aehf Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Year of construction: 1979, condition: good (used), For sale comes: Lhjdpfxjnl D U So Ad Aof 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Free location Saxony

Condition: used, dividing head Chuck DH 130 x 4 II / TGL 30 2332 Exact dimensions available upon request. Lhodpfxoyk Ilnj Ad Ajf

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Lhodpfxsyxtfwj Ad Ajf Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: used, Year of construction: 1961, faceplate diameter 3500 mm turning diameter 4000 mm centre distance 16000 mm turning speeds 0,71-33,5 U/min Rest 2 max. workpiece weight -without tailstock 6300 kg max. workpiece weight between centres 18000 kg Lhodpfxoyqvczs Ad Ajf total power requirement 31 kW weight of the machine ca. 60 t dimensions of the machine ca. 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1989, Type: EDU / 80 DR EK ICH FQW / FQS Q ApW/Q ApSS Number: 1824/1989 Admission: SK 50 Stop surface W x H: 480 x 460 mm Ledpfxjh Ar Tys Ad Aohf Hole spacing W x H: 425 x 415 mm Gear wheel diameter inside / outside: 75 / 100 mm Speed range: 18 to 2,800 rpm Condition: very good Weight: 280 kg Dimensions: 560 x 410 x 1.000 mm

Condition: ready for operation (used), Year of construction: 1982, Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible. Lhodpfxeyttw Us Ad Ajf

Condition: used, turning diameter over slide rest 800 mm Lhedpfx Adsv H Etdo Aef Control Siemens 802D swing diameter 2000 mm centre height 1000 mm

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm Ledpfsu N D Dwex Ad Aohf (without attached 4x swivel hoist ring) *

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation • Suitable for various media viscosities • High operational reliability and durability • Bidirectional operation possible • Industrial-grade continuous operation Ljdjyga U Hjpfx Ad Ajhf Applications: • Oils and lubricating media • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps • Price listed is for 1 piece.

Condition: used, Technical details: floor-plate length: 640 mm plate width: 330 mm Lhjdpfx Aeu R A A Usd Aof Plate thickness: 65 mm

Condition: good (used), Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 200 x 55 mm -Clamping depth: 285 mm -Dimensions: 650/200/H145 mm -Weight: 65.8 kg Ledpsxupuwefx Ad Aehf

Condition: good (used), Face driver, face driver, face driver, driver tip, face driver, face driver Lodpfx Aji I Hc Ajd Aehf -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Condition: good (used), Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm Lhjdporhmnaofx Ad Aof -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg