Used Wmw Erfurt Sctp 25/3150 for sale (16,300)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement. Kdodpfjzh Dtzex Adqjr

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 Kdjdpfx Adozvdm Roqer with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Kdjdpfx Ajykl Iaedqor Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: used, functionality: limited functionality, Year of construction: 1982, Maximum Cutting Thickness: 16 mm (approx. 5/8") for mild steel. Maximum Cutting Width: 3150 mm (approx. 10.3 feet). Total Machine Weight: Approximately 24,000 kg (24 tons). Cutting Angle: Fixed at 2°. Kdsdeykl Nkjpfx Adqor Drive Type: Mechanical drive with a robust, rigid frame construction. Hold-down System: Typically features hydraulic hold-downs to secure uneven sheets during the cutting process.

Condition: used, Sheet width: 2500 mm. Plate thickness: 10 mm. Distance between columns: 2700 mm. Throat: 400 mm. Total power requirement: 20 kW. Weight of the machine: Approximately 10,500 kg. Dimensions: Approximately 3800 x 2200 x 2000 mm. Kodpfeykl I Hox Adqsdr Control type: Typically conventional/manual control.

Condition: used, Year of construction: 1998, machine/vehicle number: SN: 5-2067, functionality: unexamined, power: 45 kW (61.18 HP), pressing force: 255 t, overall weight: 24,800 kg, PME Erfurt, Type: ZH 2500 / 1600, Serial No.: 5-2067, Year: 1998, 2500 kN, in operation until December 2025 Technical data of the press according to the nameplate: Press force: 2,500 kN Stroke rate: 25-75 strokes/min Rated stroke rate: 40 strokes/min Stroke: 20-200 mm Ram adjustment: 140 mm Total power: 45 kW Operating voltage: 400 V Frequency: 50 Hz Machine weight: 24,800 kg Strip feeding system consisting of: PBK, Type: Roller feeder WV-120/DSM 500P, Serial No.: BA00482, Year: 1998, PBK, Type: Straightening machine, Year: unknown, PBK, Type: Unwinding reel SCi 530 M, Serial No.: BA00482, Year: 1998 including enclosure and roller conveyor Kdsdpfxszvcxlo Adqor with peripherals: - Conveyor system Functionality and technical data have not been verified. without additional items/without further accessories, unless explicitly stated as part of the item. If interested, please contact us by email.

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Kdedpfx Asmi Rpiedqor 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: like new (used), Year of construction: 1989, Sheet stamping press ERFURT PE2-H-315 ES Manufacturer: ERFURT Made in: Germany Kedeyir Ukspfx Adqedr Specification: Max slide-block force over distance to bottom dead center 12.5 mm: 3150 kN Slide-block force over distance to bottom dead center 160 mm: 1100 kN Idle stroke amount: 25 mm Slide-block stroke: 500 mm Min closed die height: 680 mm Max closed die height: 1000 mm Moving table dimensions: 2800x1500 mm Die cushion: -Max stroke: 160 mm -Adjustable stroke: 160 mm -Max double-acting force: 630 kN -Max ejector force: 630 kN Main motor power: 45 kW Height above floor level: 7100 mm Press weight: 71.3 tons

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale Kdodpfxeyvzzze Adqjr For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press - Condition: Good - Operational status: Ready for immediate use This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. If interested, further information, technical details, and additional photos can be provided upon request.

Condition: used, Year of construction: 1965, faceplate diameter 3500 mm swing diameter 4000 mm turning height 3150 mm slide adjustment 1700 mm table load 25 t digital readout Heidenhain Rest 2 total power requirement 90 kW weight of the machine ca. 95 t No. 6671024 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Kdsdoyqtbuspfx Adqor About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm Kedpfx Ajzvb Eksdqsdr number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Kdsdpfxozvayas Adqjr Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: used, Recently arrived Kdsdpsygm Hvsfx Adqjr WMW UPW 25

Condition: used, Recently arrived Kdsdeygm Igjpfx Adqjr WMW UPW 25

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Kdodpozvaymsfx Adqjr Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Kdodevbcxtepfx Adqsr Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: good (used), WMW HECKERT BR 40/2 x 1250 radial drilling machine - Arm length: 1250mm - Maximum drilling diameter: 40mm - Morse taper: MK5 Kdjdpjzury Nofx Adqer - Minimum speed: 20 RPM - Maximum speed: 1200 RPM - 3-speed gearbox with variable speed control - Dimensions of drilling head: (L x W x H) 710 x 710 x 500mm - Weight: 3000KG - Automatic feed - Dimensions (L x W x H): 2100 x 1000 x 2900mm

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm Kdodsu Nurxjpfx Adqjr *

Condition: used, functionality: fully functional, TRAPANO RADIALE USATO 40X1250 WMW REVISIONATO A NORME. Ksdpfxozky Imo Adqsdr

Condition: used, Year of construction: 2015, Technical details: weight of the machine ca.: 4 t Kdodpsl Ha Ubjfx Adqsr

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Kodpfx Aozgdfbsdqedr Overhang 1,250 mm Spindle mount MK 5 Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Kdedpfxstzwxde Adqjr Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: ready for operation (used), machine/vehicle number: 13214814, functionality: fully functional, power: 11 kW (14.96 HP), type of input current: three-phase, pressing force: 250 t, year of last overhaul: 2010, Equipment: documentation/manual, Hydraulic press, 250 tons – fully functional, manufactured in former East Germany (DDR), model VEB Wema Zeulenroda. Kodpfx Adezbyxnjqodr

Condition: good (used), Year of construction: 1985, functionality: fully functional, spindle mount: MK 5, height adjustment type: mechanical, total width: 2,100 mm, total length: 900 mm, total height: 3,300 mm, overall weight: 3,000 kg, drilling capacity: 60 mm, clearance between the columns: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 20 rpm, spindle stroke: 400 mm, Radial drill BR 40/2 x 1250. Prod. Heckert (GER). Year 1985. Max drilling diameter in steel (mm) - 60 mm Max threading diameter in steel - M24 Max workpiece height - 1100 mm Spindle stroke - 400 mm Arm length - 1250 mm Kdjdswazbvepfx Adqer Arm rotation - 360 Drill attachment - MK5 Rotation speed range (rpm) - 20-1200 rpm Feed range - 0.063-0.63 mm/rev Base plate mounting surface - 1400 x 800 mm Table dimensions - 650 x 650 x 500 mm Machine dimensions width x depth x height - 2100 x 900 x 3300 mm Motor power - 3.7 kW Weight - 3 tons

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. Kdsdpoy A Nglofx Adqjr The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.