Used Wmw Dlz 630 for sale (2,741)

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Hedeu Av E Hjpfx Ac Tjt

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Hedpfxjx Acpdo Ac Tet Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Specifications: Hsdpfszvrrhsx Ac Tot Swing: 1,000 mm Centers: 8,000 mm

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Hsdpfx Aszwgntec Tst Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. Hsdpoy Ar Niofx Ac Tet - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t Hedpfx Acey Tyy De Tot used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system - some toolholders - steady

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg Hjdpfx Acoxwlths Tst The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97 09 05 010 1/2, filter pressure: 15 bar, pressure: 15 bar, cake thickness: 25 mm, warranty duration: 12 months, year of last overhaul: 2026, operating pressure: 380 bar, number of chambers: 25, control voltage: 24 V, Equipment: documentation/manual, safety light barrier, Good day, We have two identical chamber filter presses in stock, which have been completely overhauled and are therefore in new condition. They are immediately available! Please see the attached photos: Chamber filter press – manufactured by MSE with plate thickness: 50mm each with an additional set of plates cake thickness: 25mm volume: approx. 210 l useful length approx. 1800mm (34 plates) format: 630x630 mm dimensions: 3700x1100x1800 mm (l x w x h) empty weight: 2700kg open filtrate discharge Hsdszt Nc Ejpfx Ac Tst plate transport manual hydraulics electric Please let us know if you are interested in this press. We would be happy to send you a customized offer. Price on request.

Condition: used, Year of construction: 1962, turning diameter over bed 630 mm turning diameter over slide rest . mm turning length 3150 mm Number: 16304188/ weight 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Hjdpfx Asyqv Iwec Tst More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Stock number: 2841 Manufacturer: WMW Year of manufacture: 1961 Machine number: 3318/61 Type / Model: DLZ 355 Control: conventional Center distance: 2,000 mm Spindle bore: 35 mm Center height: 180 mm Turning diameter over bed: 355 mm over carriage: 220 mm Speed range: 18 to 2,500 rpm Hjdpfx Acoy Hgnze Tst Longitudinal feed: mm/rev Cross feed: mm/rev Equipment: 4-way toolpost, leadscrew Power connection: 5.8 kW Condition: used Weight: 2.2 t Dimensions: 3,000 x 1,400 x 1,700 mm

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm Hedpfx Aev Hckgsc Tjt - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Hjdszukt Ispfx Ac Tet

Condition: ready for operation (used), Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible. Hedpjzukufofx Ac Tjt

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Hsdpevy E A Sofx Ac Tot

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm Hsdpozuyfaofx Ac Tst revolving tail center conical turning device *

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm Hedswx R Rdjpfx Ac Tet shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: used, Year of construction: 1965, faceplate diameter 5300 mm swing diameter 6300 mm turning height 2800 mm slide adjustment 1700 mm table load 50 t turning speeds 0,3-14 U/min Feed 0,056-10 mm/U digital readout Sony Rest 2 total power requirement 120 kW weight of the machine ca. 187 t No:11670009-05rer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Hedpoyqt R Aefx Ac Tjt Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Manufacturer: WMW VEB Type: FW 200×630 x-y-z travel: 380 – 140 – 230 mm Hedpfx Acsik Hcue Tjt Table size: 200x630mm

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Hedpfxoxln Iwo Ac Tjt Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm Hsdevbhv Rspfx Ac Tet tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade Hjdpfx Aew Auu Isc Tst -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Number of teeth: 176 Z -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Number: 7x saw blades available -Price: per piece -Weight: 10.4 kg/piece

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 80 mm -Bolt circle: Ø120 x 22 mm -Number of teeth: 132 teeth -Number: 11x saw blades available Hjdpfx Aewy N Spec Tst -Price: per piece -Weight: 10.7 kg

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade Hedewy Razepfx Ac Tot -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: 88 Z -Number: 15x saw blades available -Price: per piece -Weight: 10.5 kg/piece

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade Hsdsw Auw Aspfx Ac Tet -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Number of teeth: 264 teeth -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Quantity: 1x saw blade available -Weight: 10.3 kg

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, machine/vehicle number: 0863009, turning length: 2,400 mm, turning diameter: 720 mm, spindle bore: 82 mm, total length: 4,000 mm, overall weight: 4,000 kg, HEID DLZK 630 Hedpfeyyvpbjx Ac Tst Year of manufacture: 1965 Spindle bore: 82 mm Centre distance: 2400 mm Swing diameter: 720 mm Rated current: 23 A 2 steady rests, 4-jaw chuck Faceplate Copying device Including extensive accessories