Used Vollrath Vddx 50 for sale (34,877)

Year of construction: 1972, condition: ready for operation (used), A Vollrath multi-shaft mixing plant is available. Container volume: 700l, max. batch capacity: approx. 700kg, agitator disks: 3, agitator disk diameter: 275mm, speed: 2000rpm, motor power: 36kW, stroke: 950mm, machine dimensions X/Y/Z: approx. 2200mm/1250mm/2400mm, weight: approx. 2600kg. Documentation available. On-site inspection is possible. Lrsdpfx Abowhfn Njyou

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA Ledpfez Tf D Rox Abyjru EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, Year of construction: 2008, machine/vehicle number: 240-124, functionality: fully functional, pressing force: 160 t, stroke length: 800 mm, table width: 1,600 mm, table length: 1,200 mm, table height: 650 mm, total length: 1,900 mm, total width: 3,600 mm, total height: 3,300 mm, Equipment: documentation/manual, Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm For sale is a hydraulic sub-platen press from the manufacturer LÄPPLE with a maximum pressing force of 160 T. The machine has a table size of 1,200 × 1,600 mm, an open height of 1,050 mm, and a stroke of 800 mm, and is particularly suitable for forming, straightening, pressing, and assembly work in industrial applications. The press is equipped with a PILZ control system and has an electrical version for operation on a 3 × 400 V AC power supply. ##### Technical data + information: Lsdpfxj Ad Ants Abysru Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm ==== General information - Reference ID: TPT-07 - Manufacturer: LÄPPLE - Type: Hydraulic sub-platen press - Model: TV1600-50 - Machine number: 240-124 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 1,200 × 1,600 mm - Table height: 650 mm - Open height: 1,050 mm - Stroke: 800 mm - Overall height: 3,300 mm - Overall width: 3,600 mm - Overall depth: 1,900 mm - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 240 bar - Idle travel downwards: 10 mm/s - Idle travel upwards: 28 mm/s - Initial pressing speed: 10 mm/s ==== Hydraulics & drive - Main motor: 22 kW ==== Control system - Control system: PILZ - Control panel: on the frame - Electrical design: EPLAN 5.40 - Electrical documentation: wemascon Zeulenroda GmbH ==== Safety - Safety control system: PILZ - Light curtain / light barrier: available - Two-hand operation: available - CE-compliant design - Slug damping: no - Maintenance platform: no ==== Electrical connection - Main supply: 3 × 400 V AC - Frequency: 50 Hz - Power supply: PE/N - Fuses: 63 A - Rated current of the system: 47 A - Control voltage: 24 V DC ##### Application areas: Forming, straightening, pressing, assembly work, toolmaking, mechanical engineering, metal processing, maintenance, pressing operations, series production (Hydraulic sub-platen press, sub-platen press, hydraulic press, LÄPPLE press, LÄPPLE TV1600-50, 160 T press, 160-ton press, forming press, straightening press, pressing press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of customized machines and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: like new (used), Dissolver Vollrath EWTMV 0.5 Lrods Aa Iuwspfx Abyou Previously protected design Power: 0.3 kW Speed range: 145-2000 rpm Absolutely new condition!!!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: CD.23.009-3, Online bankruptcy auction – Nenco Food B.V., Berkel en Rodenrijs (NL). Closes Monday 26 October 2026 from 14:00 CET. Viewing Friday 23 October, 10:00–15:00. Technipes TE 2/50 SG/TV + LC21 semi-automatic bagging system with gross weigher, year of manufacture 2024 Semi-automatic open-mouth bagging station for powders and granulates, 3.5–25 kg (max. 30 kg), from a gluten-free flour and dry-mix co-packing plant. - Gross weigher with Siemens SIMATIC HMI - 2 stainless steel hoppers with screw feeders - Fischbein model 100 bag closer - Belt conveyor 385 cm long, 50 cm wide (40 cm conveying width) Ledpsz Sy Eaofx Abyeru - Free-standing control cabinet with push buttons and emergency stop, approx. 80 x 40 x 200 cm Overall dimensions: approx. 385 x 230 x 307 cm (to top of hopper) Condition: used Lot 81. The Thermo Scientific APEX 100 metal detector with conveyor from the same packing room is lot 82. Also in this auction: a second semi-automatic Technipes TE.2/50 S/TV, 2024 (lot 156), and two fully automatic Technipes TE.2/50 bagging lines, 2024 (lots 42 and 46). Bidding online only, after registration. Dismantling and loading are mandatory and carried out by Auction Logistics at the buyer's expense: € 1.175 excl. VAT for this lot.

Condition: used, Year of construction: 2023, Manufacturer: Ilapak Italia S.p.A. (IMA Group) Year: 2023 Type: Complete bagging line LINE-UP 1. Belt conveyor – Service PTNMSX 2. Z-type lift with cleats – Service PTNMSX-Z 3. 14-head combination weigher – Ilapak Weightronic WA 14/50 4. Vertical form-fill-seal (VFFS) bagging machine – Ilapak Vegatronic VT2000 OF P 5. Stainless steel platform (gantry) – FQS Maximum line dimensions: 4.81 x 3.00 x 7.35 m (H) (technical data sheet) Designed for use in cold/damp environments (deep-frozen products) 1. VEGATRONIC VT2000 OF P VERTICAL BAGGING MACHINE Vertical form-fill-seal (VFFS) bagging machine, Open Frame version Forming tube and neck Vertical longitudinal seal Horizontal cross-seal jaws with integrated cutting blade Ledpfx Abe Ad Rv Eeysru Film drive via belts Bag length controlled by encoder Maximum mechanical output: 70 bags/min Film reel: Max. Ø: 600 mm Width: 400 mm Core: Ø 76 mm Max. weight: 50 kg Current format: Ø 170 mm (can be changed on request) HMI touch-screen control 2. WEIGHTRONIC WA 14/50 MULTIHEAD WEIGHING MACHINE 14 heads – 1 pre-dosing basket + 1 weighing basket per head 15 load cells: 14 weighing baskets + 1 beneath the central cone Central distribution cone Electromagnetic radial vibrating channels, which can be dismantled without tools Ouverture des paniers par moteurs pas à pas – cames paramétrables Timing hopper Unloading via 4 removable chutes into the outlet hopper Maximum speed: 90 strokes per minute Bucket capacity: 5.0 l Volume maximal de vidange (par déversement) : 12,5 l Plage de poids de vidange (par déversement) : 100 g - 3 000 g Maximum length of parts: 150 mm Modes: weighing or piece counting, mixing of up to 4 batches, multiple discharge per bag Automatic tare and calibration Ilapak HMI touchscreen Control of up to 4 external feeders Contact parts that can be removed without tools and are numbered per head AXIS F1035-E surveillance camera above the weighing machine – real-time display on the HMI (augmented reality mode) 3. PRODUCT POWER SUPPLY ( SERVICE) PTNMSX belt conveyor: - AISI 304 stainless steel frame - Modular PP belt - Effective width: 533 mm - Effective length: 2405 mm - Loading/unloading height: 3080 mm - Speed: 22 m/min - SEW SA37 gear motor – 0.37 kW – IP65 - Power supply: 400 V three-phase – 50 Hz - Wash ramp with 10 nozzles PTNMSX-Z Z-lift: - AISI 304 stainless steel structure - Modular PP belt with cleats – pitch 203.2 mm - Effective width: 403 mm - Effective length: 5,300 mm - Loading height: 2,660 mm - Unloading height: 5,215 mm - Speed: 24 m/min - SEW SA47 gear motor – 0.75 kW - Power supply: 400 V three-phase – 50 Hz - Stainless steel loading hopper - Inspection hatches Conveyor control via the bagging machine control cabinet 4. FQS GANTRY PLATFORM Stainless steel tubular structure designed for washing Weighing machine support above the bagging machine Staircase with stringers and steps made of folded sheet metal Stainless steel handrails Bolted assembly (dismantlable) DOCUMENTATION AVAILABLE EC Declarations (production lines and machinery) Declarations of incorporation for conveyors User manuals (FR / IT) Risk assessments (FR) Electrical and pneumatic diagrams Illustrated parts lists (IPB) Recommended spare parts lists (RSPL) Food contact certificates Equipment dismantled and stored on Osertech's premises.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Online bankruptcy auction – Nenco Food B.V., Berkel en Rodenrijs (NL). Closes Monday 26 October 2026 from 14:00 CET. Viewing Friday 23 October, 10:00–15:00. Technipes TE.2/50 S/TV semi-automatic bagging system with gross weigher, year of manufacture 2024 Semi-automatic bag filling and weighing station for 15–30 kg bags, approx. 1 bag per minute, from a gluten-free flour and dry-mix co-packing plant. - Technipes gross weigher with Rubix weighing installation - Manual bag filling and weighing unit - Infeed hopper on metal frame, approx. 160 x 184 cm, fed from the floor above - Outfeed conveyor - Control cabinet Lrjdpfxsz Sy E Hs Abyou Footprint: approx. 350 x 170 cm Condition: used Lot 156. Also in this auction: a second semi-automatic Technipes TE 2/50 SG/TV + LC21, 2024 (lot 81), and two fully automatic Technipes TE.2/50 bagging lines with Europack robot palletising line (lots 42, 46 and 44). Bidding online only, after registration. Dismantling and loading are mandatory and carried out by Auction Logistics at the buyer's expense: € 1.950 excl. VAT for this lot.

Condition: excellent (used), Year of construction: 2010, operating hours: 25,540 h, 1 used 5-axis machining center DECKEL MAHO DMU 50 with SIEMENS control Lsds Afbv Sspfx Abyeru Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2010, Very well-maintained press brake from Darley. Type: EHP LS 50 15 12 CL Capacity: 1550 x 50 tons New Delem DA69T control system Y1, Y2, X, R, Z1, and Z2 CNC controlled Hydraulic Wila New Standard top clamp Pneumatic Wila 13mm bottom clamp Lrodpfxoz S H Eas Abyju

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Amada Type: HFP 20 50 Capacity: 2050 x 50 tons Lsdpj Aazxcsfx Abyeru Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: used, Year of construction: 2013, operating hours: 33,559 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Manufacturer: DMG MORI Ljds Advfrepfx Abyjru Model: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Machine weight: approx. 9.8 t Spindle hours: approx. 48,437 h Operating hours: approx. 33,559 h Condition: Used Available from December 2026 Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2005, Used 2-meter CNC press brake from Amada Type: HFP 20 50 Ledpfx Abe Aaztmoyjru Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: used, Year of construction: 2013, machine/vehicle number: FA59, Used automatic Tecmi shrink wrapper - 2013Technical Specifications & Performance DataThis automatic shrink wrapper is engineered for high-efficiency industrial packaging of PET bottles on a used bottling line. Manufactured by TECMI, the machine combines reliable mechanics with Siemens automation to deliver consistent bundle quality for beverage production and other industrial packaging applications. With a compact footprint and robust construction, it is well suited for second hand integration into existing packaging machinery layouts.Manufacturer: TECMIModel: EV 750 – 50 – TT 70-45 x3Year: 2013Production speed: 50–100 bundles/minute, (36.000 BPH on 3x2 format) Configured format: PET 380 ml x 6-packContainer types: PETElectrical data: 440 V, 60 HzWeight: 1300 kgOperating mode: AutomaticControl platform: Siemens PLC/HMIAdvanced Automation & Control SystemsThe shrink wrapper is managed by a Siemens PLC with an HMI interface, providing intuitive setup, recipe handling, and diagnostic visibility for operators. Automated film handling, sealing, and shrink processes enable stable performance across the specified speed range. Temperature control and sealing parameters can be fine-tuned to maintain seal integrity and pack appearance, supporting consistent quality under demanding beverage production schedules. Interlocked guarding and safety monitoring are integrated into the control system to protect operators and maintain uptime.Production Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or as a standalone unit, this packaging machine supports infeed from upstream conveyors and discharge toward downstream case handling or palletizing systems. The configured setup is optimized for PET 380 ml bottles arranged in 6-packs with neutral film. The automation platform simplifies line synchronization and facilitates quick adjustments when coordinating with other bottling equipment such as fillers, labeling machines, and palletizers.Machine Condition & Maintenance HistoryThe machine is currently in storage. As a second hand unit, it has higher working hours compared to other available machines noted as having less than one year of use. Despite this, the Siemens-based control and industrial-grade build are designed for longevity, offering dependable performance when properly serviced and commissioned.Operational Performance & VersatilityTargeted at industrial packaging needs in beverage production, the unit runs neutral film and forms stable 6-pack bundles of PET bottles. Its speed envelope of 50–100 bundles per minute provides flexibility for varying line capacities and demand profiles. The machine’s automation and consistent sealing performance support repeatable packaging quality, minimizing rework and optimizing throughput on high-volume lines.Installation Requirements & Site PreparationPlan for adequate floor space based on the EV 750-50 layout and ensure clear access for film loading and maintenance. Electrical service must provide 440 V,... Lredpfx Abo Adyvneyou

Operating hours: 11,358 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: RX60-50 Year of manufacture: 2016 Operating hours: 11,358 h Drive type: Electric Mast Mast type: Triplex mast with full free lift Lifting height: 5,400 mm Free lift: available Load capacity and forks Load capacity: 5,000 kg Fork length: 2,300 mm Fork adjustment: hydraulic Side shifter: available Hydraulic valves: 3rd and 4th valve Battery and charger Battery year of manufacture: 12.10.2017 Battery voltage: 80 V Battery capacity: 840 Ah Battery voltage at rest: 85.3 V MACHINE DETAILS Dimensions and weight Length: 5,200 mm Width: 1,350 mm Lredpfxjz R Rf Nj Abyeu Height: 3,000 mm Own weight: 8,300 kg EQUIPMENT Hawker Enersys battery charger Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Road traffic lighting with turn signals Safety light (rear) Comfort seat Lumbar support Seat heating Function and condition video All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: - Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. - Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. - Collection is only possible after receipt of payment confirmation by email. - Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. - If collection is not carried out within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 558

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 Lrsdpfxozvrmxo Abyeu CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Lsdpfx Aoz Ib R Iebyoru Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Year of construction: 2014, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: VR100-50, Distributor designed for spreading confectionery sprinkles onto an underlying conveyor belt. Spreading width: 1000mm, underlying belt speed: 4.5m/min. Capacity: 75kg/h, discharge weight: 0.7kg/l, volume approximately 150L. Layer thickness can be adjusted using a slide. Made of stainless steel 304. See specifications for details. Lodpfxe Aa I Abo Abyjru

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: Deckel Contour 12 WORK AREA Table dimensions: 800 x 480 mm Number of table slots: 7 Travel range X-axis: approx. 400 mm Ledpfx Aj Adzl Rjbyoru Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm TOOL HOLDER Tool holder: SK 40 MACHINE DETAILS Manufacturer: Deckel Maho Model: FP3-50 Machine type: CNC milling machine Serial number: 2860-151 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 24 A Length: 3,000 mm Width: 2,400 mm Height: 2,400 mm Weight: 3,000 kg

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Lredpfxjz An S Rs Abyeu Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: excellent (used), Year of construction: 2021, 30-watt CO2 laser Working area: 457 x 30 mm Engraving and cutting of wood, paper, rubber, acrylic, etc. Exhaust system: Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC Includes monitor, keyboard, and mouse. Software: RayJetManager pre-installed. Lsdpfx Asz Surujbyjru

Condition: good (used), 1 x D.C. Norris CTTC 50 Cook / Cool Tumble System * Manufacturer: D.C. Norris & Co. (Eng) Ltd * Model: CTTC 50 * Stainless steel construction * Rotating perforated product drum * Hinged top loading lid * Integrated touchscreen control panel Lrjdoz A Dtbspfx Abyou * Steam heated * Steam pressure: 45 PSI * Air supply: 85 PSI * 400 V * 3 Phase

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C1500390, Double miter saw from Fom Industrie, model ALVA 50 A, with a 5-meter cutting length, manufactured in 2026. Equipped with a software license for cutting to specific lengths (extra long and very short) and at variable angles, a software license for displaying profile sections in DXF format, and a label printer. Lredpfx Ajz Nghvebyeu

Condition: good (used), Year of construction: 1991, Used Darley press brake Lrjdsz N Exgjpfx Abyju Type EHP 50 20 15 Capacity 2050 x 50 tons Delem control system Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 115 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 1,390 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,360 mm, gearing type: hydrostat, DGUV certified until: 07/2026, fork carriage width: 1,500 mm, fork length: 2,000 mm, fork width: 150 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), empty load weight: 7,370 kg, total height: 2,360 mm, total length: 4,480 mm, total width: 1,550 mm, color: red, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Type of machine: Diesel forklift Manufacturer: Manitou Model: MI 50 D Year of manufacture: 2019 Condition: used, well-maintained Lifting Data Load capacity: 5,000 kg Lifting height: 4.50 m Free lift: 1.39 m Mast: Triplex full free lift Height in extended position: 4.32 m Mast tilt: 6° / 12° Forks and Attachments Fork length: 2.00 m Fork dimensions: 150 × 55 × 2,000 mm Attachment: Meyer ZVG 6-2510G fork positioner Drive and Steering Drive: Diesel Transmission: Automatic Steering: Power steering Lrjdo Aayxhopfx Abyeu Tires Tires: SE Dimensions Length: 4.48 m Width: 1.55 m Height: 2.36 m EQUIPMENT Triplex full free lift mast Meyer ZVG 6-2510G fork positioner Automatic transmission Power steering

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Lredju Tkclepfx Abyeu Included: Head 150x150 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements!