Used Vertical Rotary Positioning Unit for sale (42,746)

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1085, Offer 24448 Technical specifications: Rcedpfx Abjwfq Nmj Esd - Maximum load capacity 5000 kg - Maximum clamping diameter 1800 mm - Faceplate dimensions 1200 x 1200 mm - Continuously adjustable electrical rotation - Right and left rotation - Electric remote control - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm - Weight approx. 2500 kg

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Technical data: - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg Redpfjrkmaaox Ab Eecd - Weight of rotating unit approx. 400 kg

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition Rcedpju Tln Njfx Ab Eod

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor belt: Transport belt with rotating unit -Speed: 30 m/min -Conveyor belt width: 290 mm -Conveyor belt length: 780 mm Rcjdopy Ryfepfx Ab Eod -Drive: SEW-Eurodrive 0.37 kW with brake -Conveyor belt: motorized, rotatable 180° L/R -Dimensions: 890/630/H635 mm -Weight: 91 kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS with rotating unit -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm Rsdpfstlzd Rox Ab Escd -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Rotating unit: 1040 x 1040 mm / see photos -Number: 1x roller conveyor available -Dimensions: 1700/1680/H700 mm -Weight: 301 kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor Rcjdpfx Astlzfveb Eod -Manufacturer: Grenzebach, roller conveyor type RFS with rotating unit -Drive motor: 0.37 kW 76 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Rotating unit: 1040 x 1040 mm / see photos -Number: 1x roller conveyor available -Dimensions: 1650/1400/H960 mm -Weight: 290 kg

Condition: good (used), Rotary unit, rotary device, turning table, conveyor belt, container rotary device, welding rotary device, welding device -Drive motor: 0.15/0.60 kW -Speed: 15/64 rpm -sealed: slewing ring -Device is: pneumatically tiltable -Dimensions: 2520/800/H380 mm -Weight: 524 kg Rcsdpfx Abjca Iato Esd

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -driven roller conveyor with driven slewing ring -Roll width: 720 mm -Roller conveyor length: 1500 mm -Roll diameter: 90 mm Rcsdpfjc N N Hqjx Ab Eod -driven: via sprockets -Geared motor: 0.55 kW -Speed: 18.9 m/min -Slewing ring driven: 0.18 kW 31.5 rpm -Dimensions: 1510/900/H695 mm -Weight: 314 kg

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: D 2319867, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Becker KDT 3.140/0-400 dry-running rotary vane compressor / displacement pump For sale is a Becker KDT 3.140/0-400 dry-running rotary vane compressor / blower, manufactured in 2008, in general overhauled, used condition. The compressor operates dry and uses self-lubricating vanes made of graphite composite. This eliminates the need for oil changes and reduces maintenance requirements. Rcedpfetpgxzsx Ab Eod Technical data according to the nameplate: Manufacturer: Becker Model: KDT 3.140/0-400 Machine No.: D 2319867 Year of manufacture: 2008 Power: 6.7 / 8.2 kW Frequency: 50 / 60 Hz Speed: 1450 / 1740 rpm Volumetric flow: 129 / 153 m³/h Operating pressure: 1500 mbar / 1.5 bar Weight: approx. 176 kg Dimensions: approx. 930 × 550 × 450 mm

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine Rsdpfsu Su Apox Ab Eecd with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Rcodpfozmw Upex Ab Eod Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: good (used), Rotary unit, rotary device, turning table, turning unit -Roller conveyor length: 850 mm -Rollers: Ø 80-120 mm -Roller spacing: 190 mm -Roller width: 220 mm Redpfx Asb A Ib Esb Eecd

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW Redjxvr T Ejpfx Ab Escd - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: used, Year of construction: 2001, machine/vehicle number: 008147801, Offer 26176 Technical data: - Dimensional stop with digital display 6000 mm Rjdpfx Aozhamdob Eecd - Jaw feed adjustable by handwheel with clamping function - pneumatic stop clamping - Pneumatic connection 6 bar - Space requirement approx. L 7700 x H 1350 x D 900 mm - Weight approx. 1200 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Rcedpfx Abjzhi R So Eed

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Rcsdpfx Aexddwrob Eod Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: ready for operation (used), Positioning table, welding rotator, rotary work table, Used machine Manufacturer: Weiss GMBH Type: TC 700 T Overall dimensions: Width: 870 mm Depth: 900 mm Height: 820 mm Weight: 871 kg Rcsdpfx Absw Havfe Eed Electrical specifications: 400V; 6.8A; 3.4 kW Table diameter: 700 mm

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 8,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with pallet changer on moving column (ROTOPALLET) with spindle line and spindle motor fully refurbished as new. CNC SIEMENS 840D. Tool magazine with 40 positions. Chip conveyor. High-pressure pump through the spindle. Spindle cooler. Remote electronic handwheel. Rcodpoydhyxjfx Ab Esd

Year of construction: 1964, condition: used, -WKG 429- We are offering a grinding machine from Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100mm Grinding wheel Ø: Shrink-fit arbor 475/254 Grinding wheel Ø: Plain arbor 457/357 Weight: 8t Grinding method: Segment grinding Segment grinding heads: 2 pcs Accessories: Rsdpfxeg Nt Dbe Ab Escd Dressing device Water tank with paper band filter Marposs control

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° Rcjdoxf Uudopfx Ab Ejd BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: D 2402263, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2009. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Packaging and loading included. Rsdjtp Tklopfx Ab Eocd

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Rcjdpeukg Srsfx Ab Ejd Table size: 400x620mm

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Rcsdpfxowugczs Ab Eod Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 2006, machine/vehicle number: HB45, functionality: fully functional, Year of manufacture 2006 / revision 2009 Connected load 40 KW Machine weight 9650 kg Processing units 12 horizontal 12 vertical 6 Total units 18 Circular indexing 0.7 seconds Rsdpfx Ajvt Ummob Eecd Number of collets 12 Type B45 Maximum clamping 45.00D diameter Length of workpieces max 170 mm Hydraulic unit 10L/Sp-30ccm/4Kw/NG 150 Control cabinet / gallows + pendant control OP 10C Loading magazine 4.20 M Platform Coolant system Exhaust nozzle Stairs

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Rcsdpovriq Rsfx Ab Esd