Used Valon Kone Valonkone Debarking Plant for sale (3,118)

Condition: reconditioned (used), B., VK26M (model series 1974) with motorized discharge table: - Main machine - Infeed table (driven) - Discharge table - Control cabinet Including infeed and discharge table, workshop inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed = 235 RPM - Rotor opening = 65 cm - 30 kW motor, speed 1500/min - Speed: 17-42 m/min - 3 m or longer (wood length) Dimensions (without infeed and discharge table) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Discharge table (motorized table): 3170 mm x 1000 mm x 1300 mm RENOVATION: Pos 1: 1 unit: Machine disassembly, washing, sandblasting, priming, and painting, repair, assembly Pos 2: 1 unit: Material - knife axle bearings on the rotor, new bearings and seals (if required) Pos 3: 5 units: Miscellaneous material: V-belt for rotor drive Pos 4: 1 unit: Gear oil Pos 5: 1 unit: Material: Abrasives + paints Pos 6: 4 units: Valonkone peeling knives Pos 7: 4 units: Valonkone pre-separators Pos 8: 1 unit: Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor input Pgodsfn Iu Iopfx Abkjn with start for 4 kW geared motor output Main starter Emergency STOP

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm - 8 x M16 mounting holes Pjdewt Ry Uepfx Abkogn - Renowned German manufacturer - Suitable for VK 26 models - Available immediately

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Pjdpfxezfwllj Abksgn

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pedpjtwrp Dofx Abkjgn Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor with start for 4 kw geared motor infeed with start for 4 kw geared motor output Main starter Emergency STOP

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Pedpfx Abjpbbmljkjgn

Condition: new, Year of construction: 2023, Debarker reducer disc with 5 or 6 knives, diam range 200, 300, 400 mm Pgedpfx Abokhcx Sokjn

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Pgedstk N Dkepfx Abkon

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor Pgjdju Hmacopfx Abkjn 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. Pedpfx Asxhdtzjbksgn The debarking rotor bearing is new.. The machine has been overhauled. 6-month warranty

Condition: used, Year of construction: 1997, VK 550 Combi 3R Debarker-Reducer Combination Pgsdsw Hy E Tspfx Abken VK 550 frame with one ring reducer rotor and two counter-rotating debarker rotors. Debarker rotor opening: 620 mm. Service-friendly pull-out rotors for quick and safe maintenance. Ring changer for reducer ring.

Condition: refurbished (used), functionality: fully functional, The VK820 two-rotor machine is equipped with 620 mm rotors and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished in our workshop and is in excellent working condition. Pgjdox Dip Hopfx Abken Alternatively, depending on the client’s needs, the rotors can be replaced with 480 mm rotors.

Condition: excellent (used), VK450 2RE log peeler.Equipped with two rotors. One is a stump rotor. The other is the peeling rotor. Min-max tree diameter 8-45 cm. Min tree length 3 m. Complete with original VK centring conveyor. To be sold after overhaul. Psdpfx Ajulv Hzebksgn

Condition: reconditioned (used), VK 450 The debarker has been completely refurbished Pgsdpfoq Hr N Ijx Abken

Condition: used, Valon Kone VK450 with infeed conveyor. Pjdovt S R Aepfx Abkogn

Condition: used, Valon Kone VK26M With infeed and outfeed conveyors. Pgodpfx Abjvgtz Neken

Condition: reconditioned (used), functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Pjdpfx Aowfdi Hjbkogn

Condition: reconditioned (used), functionality: fully functional, The VK550 two-rotor machine can be equipped with 480 mm or 620 mm rotors (alternatively, one rotor can be a reducer). It comes complete with a feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Podpfxowfp Sao Abksgn

Condition: used, Year of construction: 2012, Transverse chain conveyor with 4 units, length 6 m Log loading cradles with singulation connecting rods, 4 units Mobile cutter debarker with mechanical arm, min/max log length 1000/6000 mm, min/max log diameter 200/1100 mm Podpfx Ajyappaobkjgn Paddle chain waste removal conveyor, width 600 mm, length 10 m, ascending Installed power: 35.2 kW Compressed air consumption: 100 NL/1' Cutter width: 300 mm

Condition: good (used), Cheese whey processing plant 15,000 Litres/Hour Plant consists of:- 250 litre stainless steel tank 15,000 litre/hr product pump complete with 5.5kw motor Tetra plex C8 SR plate heat exchanger SWEP gasketed hot water preparation unit Psdszdz Nfepfx Abkogn Hot water pump complete with 3.0kw motor Automatic steam on/off valve Steam modulating valve Steam trap & Filter Holding tube pipping and valving including 3 off x 2" 3 port flow divert valves RTD's for hot water, hot whey & cold whey High level probe for the balance tank

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE Psdeflz Hdepfx Abkogn DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, color: other, Year of construction: 2012, Serial number: GO2597 Machine 72 CE compliant: yes Equipped with an electric hoist Hoist brand: Kone Capacity: 5 metric tons Span: 15,000 mm Double girder: no Height at bottom of girder: 6,200 mm Pgjdpfxezf Ib Ro Abkjn One side rests on a running beam Documentation and electrical schematics available Radio-controlled remote Anti-collision protection Online auction of overhead cranes, gantry cranes, welding equipment and industrial handling assets, all originating from KSK GmbH in Schwerte, Germany. For sale (e.g. 2 KONE CXTD 16T overhead cranes (2012), 1 KONE 15T overhead crane (2009), 2 DEMAG 10T overhead cranes (1997), 1 Dieter Seifert 5T overhead crane (1991), 1 Giromatic GRMM-10-450 welding positioner / rotation system with twin rollers (2018), 1 Fronius TPS 500i digital inverter MIG/MAG welding machine (2025, unused), 1 ESAB automatic welding installation for long weld seams (2004), 2 KONE mobile gantry cranes (2012), 1 Scheffer ELV 5T mobile hall gantry crane (2004), 1 Atlas Copco GA11+FF screw compressor with integrated dryer (2012), 1 ESAB Centrovac WS 40-20 K industrial central fume extraction unit, 3 heavy duty double-sided cantilever rack systems (2018), 2 Globus jib cranes, various heavy duty clamping tables, transport frames, pallet racking and supporting workshop equipment). The online auction opens Thursday 28 May and closes Tuesday 30 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 26 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Pgodpfx Aboy Hk Daeken

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 complete trolley with hoist and travel motor, including all cables / festoon cable trolley / power supply lead / control switch (see last photo) Year of manufacture: 2007, Reeving 4/1, Gear ratio i=67, Load capacity 3200 kg, Lifting speed 6 m/min and 1 m/min Very good condition Many trolleys in stock, also available in other sizes Pgsdpfxjyyu S Uj Abken

Condition: used, Technical details: load capacity: 800 t total wight: 12,0 / 8,6 t voltage: 380/440 V dimensions L x W x H: 6,9 x1,5 x1,8 m dimension L-W-H: 5,8 x 1,25 x 1,25 m Welding positioner 1x mounting bracket with integrated electric cabinet driven 1x rotating mounting bracket Running speed infinitely variable via frequency inverter Clockwise/anticlockwise rotation * Pgodpfx Abev A Uzijken

Condition: new, Year of construction: 2025, Plant Type : STATIONARY Concrete Batching Plant with TWIN SHAFT MIXER Plant Capacity: 100m³/ hour freshly compressed concrete Mixer Capacity: 3000/2000 lt (2m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE Psdjflz H Dopfx Abkjgn * SUITABLE TO WORK UNDER HARD CONDITIONS OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Italian- French-German-Spanish- Arabic-Russian languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.