Used Urban Reinforcing Screwing Machine for sale (68,446)

Condition: reconditioned (used), functionality: fully functional, URBAN POWER SCREWDRIVER with automatic SCREW FEEDER Technical data: Hodpfsx U An Tsx Ampol Air connection: 7 bar Length: 1,400 mm Width: 700 mm Height: 1,800 mm Weight: 100 kg Machine overhauled

Year of construction: 2017, condition: used, Manufacturer : Transvis Hsdpfey H Rfqox Ampsl Type: Semi-automatic cap screwdriver Application: screwing / capping Year: 2017 Maximum product dimensions: Ø 54.5 x 82 mm Minimum product dimensions: Ø 45.5 x 68 mm Product weight: 90–150 g HMI control panel Asynchronous motor power: 0.18 kW Two-hand control Torque control Overall dimensions: 650 x 1000 x 1800 Screw capper dimensions: 650 x 935 x 990 Weight : 100 kg Spare parts and formats available Power supply: 220V single-phase / 6 bar compressed air Technical documentation available Video available in running condition

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation Hsdpfoxabntsx Ampol - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: new, engine 2,8 KW weight of the machine ca. 320 kg dimensions of the machine ca. 86 x 90 x 85 cm Hsdpfxey H N Nze Ampel

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 Hsdpfx Amjy D Nghopol 1984 230-600 pieces 2.5–6 mm Blank length: 4–75 mm Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 52 mm, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 8 mm, Flat Die Thread Rolling Machine Ingramatic RP2 V # 408 Year of manufacture: 1984 Hsdpfx Asy D Na Ujmpjl Output: 200-410 pieces per minute Diameter: 3.5-8 mm Blank length: 6-90 mm Thread length: 52 mm Tool dimensions: 130/115x30x54 Power: 12 kW

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,000 mm, total length: 3,650 mm, total height: 1,850 mm, overall weight: 600 kg, 1 Hambi Mattenschneidemaschine TV 25 V, working width 2.50 m, year of manufacture 2000, max. 12 mm single bar or 8 mm double bar, cutting time forward/backward approx. 13/10 sec. Connected load 3 kW. Hsdpsvxtc Dsfx Ampel

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar Hodpfsyzxfnox Ampel - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Hedstxni Nspfx Ampel Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Year of construction: 2009, condition: ready for operation (used), Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard and numeric display, manual and automatic operation, foot pedal control, emergency stop button and emergency stop foot pedal, installed power: 5.5kW, length: 6705mm, width: 710mm, height: 1035mm, weight: 1220kg, oil tank capacity: 60l, electrical connection: phases: 3x6mm², ground: 1x6mm², equipment: support frame with control cabinet and hydraulic unit, fixed and movable bending bar, standard spare parts set, foot pedal (1x) + emergency stop foot pedal (1x), documentation available, on-site inspection is possible. Hjdpfey A Slwex Ampsl

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Rebar Bender P74 Evo Year of manufacture: 2023 (like new, only used for testing) Programmable with digital display With modular workbench with rollers, 2 meters With Uniq stirrup tool for 2 materials, 16 mm Serial no. 400V-50Hz, 3-phase basic A/C Motor: 7.5 kW CE declaration With preset bending angle via plug-in pins 5 rpm Disc diameter: 720 mm Hedsy Awzkjpfx Ampsl Maximum bush diameter: 400 mm Foot switch Dimensions: 160x116x96 cm Weight: 1600 kg Bending capacity at R = 65 kg/mm2, Round: 60 mm At R = 86 kg/mm2 – round steel: 50 mm With bushes, see photos With 1 piece square pin HS-Code: 8462 5900

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 220287, NS60E Nakashimada double-pressure press from 2022, like new, cutting length 95 mm, wire cutting 7 mm Hodpfx Amswiwqxepol

Condition: refurbished (used), functionality: fully functional, total width: 800 mm, total length: 1,100 mm, total height: 1,100 mm, bending angle (max.): 360 °, overall weight: 600 kg, We offer this refurbished Peddinghaus Perfekt 32 KA or 32 PA rebar bending machine, year of manufacture unknown. Manufacturer: Peddinghaus Model: Perfekt 32 KA/PA PLA Serial number: 350114786/01 Hsdpfxeyxc Smj Ampjl If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Numeriek gestuurd Japanse elektronica werkt betrouwbaar, 720 mm snijbreedte, zeer stabiel en zwaar gebouwd (1400 kg), kogelomloop spindel voor spelingsvrij instellen van het zadel. Manual en extra mes ingegrepen. Prijs “as is” geladen op uw transport, excl. eventuele gecertificeerde verpakkingskosten. Hjdpew R En Hsfx Ampsl

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Progressive Press SACMA SP260 5 Dies – Like new – Perfect working condition Available for any test at HBR srl. Completely overhauled Hedpfx Amewar Efopsl Technical information: Number of dies: 5 Heading tonnage: 800 kN Max cutoff diameter at 500N/mm²: 11.5 mm Max cutoff length: 85 mm Max kickout stroke (die): 65 mm Max kickout stroke (punch): 20 mm Speed: 275 pcs/min Power of main motor: 30 kW Die diameter: 54 mm Die length: 90 mm Punch diameter: 45 mm Net weight: 11,300 kg Gross weight: 13,000 kg We look forward to welcoming you at HBR srl in Calolziocorte (LC)

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool Hodpfx Amjyb R Nwepol -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle Hsdpfx Ajyb R Ndempol -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine Hodpfxeyb R Akj Ampjl -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Condition: new, Year of construction: 2025, – Capacity 36 mm – Automatic and manual mode – 3 programmable bending movements – Foot pedal operation Hjdpfx Amsydhl Iopol – Hardened bending tools – Emergency stop – Documentation – 400V

Condition: used, functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: electric, Equipment: electrical contact length stop, emergency stop, foot remote control, Rebar bending machine Peddinghaus Spezial 55. Completely overhauled machine with tooling. Hsdpfoydfwusx Ampsl

Year of construction: 1997, condition: excellent (used), 6 head ZALKIN cap screwdriver. Type - CA6 320 NG. - Machine number - 23334. - For 40mm PET bottles. - Capacity - 6000 pcs. I the hour. Year - 1997. Operating hours - 5000 hours. NERD. Hsdsixmcdjpfx Ampel 6 head ZALKIN cap screwdriver. Type - CA6 320 NG. - Machine number - 23370. - For 28mm plastic bottles. - Capacity - 6000 pcs. I the hour. Year - 1997. Operating hours - 5000 hours. NERD. We have 2 pcs. ZALKIN capsule screw machines in stock. Have more pictures of it we can send over email. Price is per. machine!

Condition: like new (used), Refurbished stainless steel dosing screw, auger, filling machine, screw dosing Coarse and fine dosing Screw flights can be quickly disassembled for cleaning Motor power 1.1 kW and 0.75 kW See our other listings Hsdswygbbepfx Ampol VMA

Condition: used, Perschroef dosing screw dosing machine All stainless steel Hodpfjwyfxrsx Ampjl Motor power 1.1kW 9.7rpm Diameter screw 150mm Mobile Connection DN100 See our other advertisements VMA Wekerom

Condition: good (used), K-Tron dosing machine, dosing screw, weighing filler, dosing unit Type: T-35 Incl. scale with control system and display (functionality unknown) See our other advertisements VMA Wekerom Hjdpfx Aowyf Iaompel

Condition: ready for operation (used), System uncoils construction steel from coil and cuts it to desired length Straightening and cutting-to-length machine 8/10/12/14 mm Hedpfx Amow Trpcepjl