Used Trasportcar Srl V06 for sale (2,674)

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21011109, total height: 1,200 mm, construction height: 1,200 mm, lifting height: 5,100 mm, empty load weight: 4,700 kg, load capacity: 3,000 kg, overall weight: 4,700 kg, total length: 5,000 mm, total width: 2,500 mm, table width: 2,500 mm, input voltage: 400 V, type of input current: AC, platform width: 2,500 mm, power: 4 kW (5.44 HP), New machine never used, very sturdy construction, available immediately. Complete with clarification of conformity issued by the manufacturer. Rsdpfeudi D Nox Afnjt

Condition: used, Year of construction: 2000, functionality: limited functionality, type of input current: three-phase, inner dimension length: 11,000 mm, inner dimension width: 1,050 mm, inner dimension height: 1,200 mm, overall weight: 10,000 kg, Equipment: documentation/manual, WDE MASPELL MCP 2000-V Vacuum Dryer + GRETEL 48kW Boiler – Complete Retrofit (2023/2024) Description For sale: WDE Maspell MCP 2000-V vacuum drying unit with an approximate wood drying capacity of 6 m³. This machine underwent a complete overhaul of its peripheral components in 2023 and 2024 for optimal recommissioning. Very few operating hours since refurbishment. Average Cycle: 3 to 4 days drying time for 27mm-thick wood at moisture content below 30% Retrofit history (2023): * Electric boiler: Brand new GRETEL TRT548 (48 kW) installed on June 16, 2023. Rjdpoy Igdfsfx Afnot * Protection: Sold with a custom-built Douglas fir shed designed specifically to protect the boiler and external equipment, as well as weather shelter for the electrical cabinet. * Maspell maintenance: Numerous wear parts replaced with new, original Maspell components. * Hydraulic system: Circulation pump replaced during boiler installation. * Heat exchanger: Plate heat exchanger replaced with new Barriquand brand plates. * Water treatment: New Eautex water softener installed with all connection accessories, protecting the system from limescale. Technical specifications: * Control: MCP 2000-V system (technology introduced by Maspell in 1998). * Electrical cabinet: Tecnoelettrica Narni, year of manufacture 2000, IP55 protection. * Power supply: 380V / 400V - 50Hz. Current condition: The machine was in full operation until 2025. Only the vacuum pump is currently non-operational and requires repair or replacement. All other systems (heating, circulation, exchanger, automation) are recent or have been overhauled. Sold as is. If you have questions or need further information, please feel free to send us a message or call us.

Year of construction: 2016, condition: good (used), 1.00 - GENERAL MACHINE DATA · Machine type: APC 1500 TON · Closing direction: Downstroke · Max. operating pressure (primary circuit): 220 BAR · Clamping force: 1500 TON · Weight: approx. 42,000 kg · Dimensions (W x D x H): 2500 mm x 2500 mm x 5500 mm 1.01 - HYDRAULICS & CYLINDERS · Number of clamping pistons: 1 · Clamping piston diameter: 930 mm · Clamping piston stroke: 700 mm · Number of rapid traverse/return cylinders: 2 (oil-hydraulic) · Force of rapid traverse cylinders: 20 TON (each) · Rapid traverse cylinder (bore): 120 x 50 mm · Guide columns: Steel C45, hard-chromed (0.15 mm), Ø 200 mm · Guide length: 600 mm 1.02 - DIE HANDLING TROLLEY (TRANSFER CART) · Transfer cart dimensions: 900 mm x 1900 mm · Transfer cart stroke: 1500 mm · Number of cart cylinders: 2 · Cart cylinder bore: Ø 70 x 40 mm (stroke 1400 mm) · Loading and unloading side: Front 1.03 - WORK AREA & TOOLING · Number of working levels: 2 · Number of usable spaces: 1 · Clear distance between levels: 800 mm · Ejector travel area: 650 mm x 600 mm · Minimum tool height: 100 mm 1.04 - ELECTRICAL DATA & CONTROL · Control system: Programmable Logic Controller (PLC) · Motor voltage: 380 V / 50 Hz · Control voltage: 24 V DC · Installed power (main motor): 37.5 kW · Frequency converter: Yes (for low-noise operation and energy savings) · Vertical travel measurement: Linear transducer · Cart travel measurement: Encoder with absolute zero point · Pressure monitoring: Electronic pressure transmitter 1.05 - SAFETY FEATURES Rsdpfx Afjytc Shonst · Fall protection: Progressively acting mechanical safety device (effective in any position) · Safety zones: Light curtains (Category 4) at loading and unloading sides · Side guards: Fixed frames with interlocked safety doors (safety switches) · Standards: Complies with CE guidelines 1.06 - CONSTRUCTION & MATERIALS · Frame: Electrically welded steel (ribbed) · Bearing bushes: Bronze bushings · Hydraulic components: CETOP standard (e.g. ATOS) · Pneumatic components: UNI-CETOP standard

Condition: not inspected (used), Year of construction: 1998, machine/vehicle number: 13189, functionality: limited functionality, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Rsdpfx Aju R Ulhsfnst Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: new, functionality: fully functional, machine/vehicle number: ST2100-001, overall weight: 450 kg, Year of construction: 2021, STEMA GLF Dowel Shooter Automatic Certainly the most productive dowel inserting machine for heavy and long dowels. Pre-installed for dowels, 80 x 8 mm, as commonly used in window manufacturing. Please refer to the detailed description in the attached PDF. Rjdpfx Afsxhv A Ionst The machine is available for demonstration in our showroom and ready for operation.

Condition: used, Year of construction: 2022, Overview This Gravity Filler for Cans was manufactured in 2022 by Italian company Emma. The machine has never been used and is immediately available. It is designed for small-scale can filling, particularly suited for 15 cl and 25 cl slim cans, with manual loading and a production speed of up to approx. 600 cans per hour. Technical data Capacity: approx. 600 cans/h Formats: 15 cl slim, 25 cl slim Dimensions: L.1480 mm x W.850 mm x H.1800 mm (max. 3000 mm) Weight: 350 kg Power: 0.8 kW Air consumption: 190 Nl/min Operating pressure: 6 bar, dry and non-lubricated air Voltage: 220 V (Single-phase) Frequency: 50 Hz Auxiliary voltage: 24 V DC Ambient temperature: 2 °C to 40 °C Redpfx Afeym D R Esnst

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: Rjdpex Dbkcefx Afnst ✅ Model - RMC10. ✅ Serial number - 18109. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: new, Year of construction: 2026, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. Rjdpfxox Urucs Afnst SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2026, The SQUALO 522 Multiblade or Double Shaft Multiblade Circular Saw is a technological machine, essential in a modern sawmill to optimize the production of sawn timber. Rsdpolz S Rbofx Afnot Ideal for the production of strips, squares, sawn timber, profiles, trimmed boards, prisms, tablets, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Double shaft multi-blade: Squalo 525 motor powers from 55 to 132 Kw Description Details Conveyor belt width mm 520/620 Width Conveyor rollers at the entrance mm 510 Width Conveyor rollers at the exit mm 610 Max saw group width mm 500 Max cutting height mm 220 Min. Length of work mm 1000/1200 Max passage width mm 800 Blade shaft diameter mm 80 Max diameter circular blades mm 400 Blade hole diameter mm 100 Blade shaft speed rpm 3.800 Speed of advancement mt/min 3 – 60 Weight 9.500 – 10.500 Kg Overall dimensions mm 2720x2515x2105h

Condition: new, Year of construction: 2026, The PIRANHA 310 Multi-blade or Multi-blade Circular Saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Rjdpfxohpbu Rs Afnet ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Model - 8-1 (8 x filling heads). Serial number - 013368. Date of manufacture - 2019. Speed - up to 500 bottles per hour. Redpsulpu Ssfx Afnet Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Year of construction: 2007, condition: excellent (used), machine/vehicle number: WT.010, WPR rewinder Rjdpfjy Au A Ssx Afnjt Model WTG 700 Year 2007 Fully operational, in very good condition, complete with a set of 10 knives For inquiries, please contact Piotr Żołnierczyk at +48 606 666 023

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Rjdpfjyzr Nmsx Afnst Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation Redpfxeygh I Uj Afnot The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Rsdpfxewhkywo Afnet

Condition: used, Year of construction: 1998, Manufacturer : Axomatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Rodpfxex R Arke Afnst Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A

Condition: used, Year of construction: 1995, Manufacturer: Ozaf srl Model: E 10 Year : 1995 Redpfjx R Ap Aex Afnot Type : Elevating belt with cleats / Giraffe conveyor.   Power : 1,5 Kw Equipment: vibration system Overall dimensions: 65 x 135 x 190 cm Dumping height: 120 cm

Year of construction: 2021, condition: used, functionality: fully functional, complete 3-stage washing system, entirely made of stainless steel 1st stage: washing with hot water 2nd and 3rd stage: rinsing with cold water Redpfxeyxgppe Afnst workpiece passage height 2100 mm, depth 800 mm

Condition: new, Year of construction: 2024, conveyor belt length: 2,000 mm, conveyor belt width: 350 mm, conveyor belt speed: 33 mm/s, total length: 2,050 mm, total width: 450 mm, total height: 500 mm, overall weight: 50 kg, discharge height: 500 mm, Equipment: documentation/manual, emergency stop, type plate available, NP 2000 - U 350 O 76 mod.NP (BLADE SEPARATOR) STANDARD FRAME Profile type: STANDARD FRAME Drive roller diameter: 76 STANDARD Bottom flat part length: 2000 mm Usable width: 350 (actual width 345 mm) Loading height external: 300–500 mm Rodpjyym Izefx Afnot Belt type: BLACK PVC ROUGH FINISH BELT LATERAL MOTOR Motor: 0.18 kW 4P B14 400V THREE-PHASE 50 Hz 400V THREE-PHASE / RIGHT SIDE Gearbox: RMI40P 1/100 63 B14 (3.3 m/min) Load hopper: 700 x 550 x H. 200 mm GALVANIZED STEEL SUPPORT Support type: WHEELS Control unit: START/STOP switch Control: ON/OFF + emergency button 400V THREE-PHASE 50 Hz on left side

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 2.028.01.057.02 -Dimensions: 265/125/H100 mm Rsdpeiidr Rjfx Afnet -Weight: 2.0 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Rjdpeiidrxsfx Afnst -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 330/125/H50 mm -Weight: 0.9 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Rsdpeiidr Hefx Afnst -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg

Year of construction: 1994, condition: good (used), Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi LEA SRL. Control module from Bierrebi TA 103 automatic cutting machine. -Board: LEA SRL. Type LEA 1032 2.028.01.065.01 -Dimensions: 370/90/H28 mm -Weight: 0.4 kg Rsdpfeiidrbox Afnst

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 Rjdpjiidrqofx Afnet -Circuit board: LEA SRL. Type LEA 1004 2.028.01.063.02 -Dimensions: 400/100/H50 mm -Weight: 0.4 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 360/130/H60 mm Rjdpfx Afoiidruenot -Weight: 1,3 kg