Used Tmci Padovan Pasterizator Th.3St. 50Hl for sale (2,722)

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 91160677-0-001, Pasteurizer in excellent condition, worked in a winery Ijdpfovq Snijx Am Ijia

Year of construction: 2019, condition: used, consisting of: - Malt milll - Mash-/Wortkettle/Whirlpool - Lauter tun - Warmwater vessel - Wort cooler - Wort aeration - Siemens touch screen - 4 x Fermenting vessel - 8 x Storage tanks with shell cooling surface - Icewater vessel - mobile beerpump - Steam boiler - 2 Bottle-filler + 1 Can-filler by Fillmatic - bottle filler A. Gruber Additional title: 5 hl-Brewery, with Grist Mill, Compact-Brewhouse, Fermenting vats, Storage tanks Cast out wort: 500 l Capacity wort cooler: 750 l/h Wort cooling time: 40 min. Iisdevcqk Hspfx Am Iea Material: Brewing vessel, hotwater tank, fermenting and storage tanks in stainless steel, 1.4301 Base construction: Brewhouse compact unit on stainless steel frame, vertical Fermenting vats on feet, horizontal storage tanks on two layer in a stainless steel frame. Features: mobile grist mill, mash-/wortkettle, lauter tun, warm water tank, wort-cooling and aeration, 4 fermenting vats, 8 storage tanks with temperature control, pumps, hoses, bottle- and can-filler, bottle-washer, ice water tank, steam generator

Year of construction: 2016, operating hours: 50 h, condition: like new (used), functionality: fully functional, Impiantinox Easybräu SCB 500 brewing system consisting of mash/boiling kettle, lauter tun, hot water tank Agitator in the mash tun Chopper in the lauter tun Electrically or steam heated Electrical connection 40 kW Steam condenser in the boiling kettle Isdpjq H Azzofx Am Ioia Brewing volume from 3.5- 7 HL Complete internal piping with pumps, electric heating Heat exchanger for wort cooling Wort aerator

Condition: used, 30m³ stainless steel tank features a full-height stainless steel coil Diameter 2.97m Total height 5.40m Cylinder height 4.30cm Leg height 30cm Cone height 30cm Isdpfx Aeyw Ub Rom Ijia Gear motor height 50cm

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Iodpfx Aeydc R Sem Isia Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: used, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet Iijdpfx Amsvcqzrs Ija

Condition: used, color: other, Year of construction: 2019, operating hours: 1,369 h, GVW: 2.450 kg Engine type: Kubota kubota CE mark: yes Serial number: JCB3TSTHTK2915474 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.  Iiedjxxxkcepfx Am Ija

Condition: used, machine/vehicle number: JCB3TSTHVK2781072, color: other, Year of construction: 2019, operating hours: 1,233 h, Drive: Wheel Power internal combustion engine: 33 HP (24 kW) GVW: 2.450 kg Make of engine: Kubota Lifting capacity: 3.000 kg CE mark: yes Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   Iodjtuvmiopfx Am Isia We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: used, machine/vehicle number: JCB3TSTHTK2780870, color: other, Year of construction: 2019, operating hours: 1,021 h, Power internal combustion engine: 33 HP (24 kW) GVW: 2.450 kg Make of engine: Kubota Lifting capacity: 3.000 kg Iijdpotqunwjfx Am Ioa CE mark: yes Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: used, machine/vehicle number: JCB3TSTHCK29155002, color: other, Year of construction: 2019, operating hours: 869 h, Drive: Wheel Power internal combustion engine: 33 HP (24 kW) GVW: 2.450 kg Make of engine: Kubota CE mark: yes Machines for Sale! Iiodpfsxxxifsx Am Iea Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: good (used), A-1654-Padovan- Brine filter Padovan Green Brine filter Iisdoh A Hckjpfx Am Iea Please contact us for more information.

Condition: excellent (used), Year of construction: 2008, PADOVAN TAYLO LUX 10 ROTARY PRECOAT VACUUM DRUM FILTER ROTARY VACUUM FILTER FOR WINE LEES, GRAPE JUICE AND CARBOHYDRATES – TAYLO DRUM AREA - 10,5 Sq. m. Iedpjv Ivm Defx Am Ieia Vacuum filtration on kieselguhr prepanel or perlite. Processing steps: - Pre-panel formation; - Filtration and drainage; - Cutting and draining the panel; - Extraction of the filtrate; - Filtration of residual liquid and filter washing at the end of filtration. EXCELLENT CONDITION. LOCATION - POLAND.

Condition: new, Year of construction: 2025, Roll forming roof panel machine F3 with cover Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism. However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it. Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses. Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses. As additional options with F3 machine you can get: length measuring device Iiedpfx Aoh R I Iuom Iea ribbed panel rolls radius panel rolls cross cutting knife floor decoiler hand seamers electric seaming machine ESM-1 sliding clip formers ribbed panel forming machine RPFM

Condition: good (used), functionality: fully functional, Used machine in very good condition, was in operation last year. Isdpfxjvr E Eds Am Ijia

Condition: used, infeed belt “Stork” all stainless steel mesh wire belt belt width 400 mm Iiedpfxjy A Hu Te Am Ija mobile dimensions: (L x W x H) : ± 1.400 x 700 x 900 mm + “Marel Townsend” GoldFryer Type TBM 400/4000 TH all stainless steel suitable for thermic oil heated with lower and upper belt frying length 4.000 mm belt width 400 mm adjustable speed oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 7.100 x 1.500 x 2.900 mm oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 7.100 x 1.500 x 2.900 mm

Year of construction: 2021, condition: excellent (used), Zwick/Roell Universal Testing Machine RetroLine 50 kN (Z050/TH), year of manufacture 2021, upgraded as part of a RetroLine conversion. The machine was used in ongoing operation and is in good working condition. Thanks to the modernization with RetroLine tC II and regular maintenance, the system is ready for immediate use. TECHNICAL DATA: - Maximum force: 50 kN - Test speed: 0.001 – 500 mm/min - Test space height: approx. 1380 mm - Test space width: approx. 440 mm - Data acquisition rate: 400 kHz - Data transmission rate: 500 Hz (optionally up to 2000 Hz) - Interface: Ethernet Iisdpjy Attvjfx Am Isa EQUIPMENT: - Xforce load cell type P (Precision) incl. calibration certificate - Accuracy class 1 according to ISO 7500-1 from 200 N - Accuracy class 0.5 from 1000 N - Extensometer / measuring sensor - Gripping tools / jaws - Ball screw spindles - Adapter bolts 36 mm SPECIMEN HOLDERS: - Wedge screw specimen holders up to 50 kN - Symmetrical and asymmetrical clamping - Temperature range: -40 °C to +250 °C Jaw inserts, steel (1 set = 4 pieces) - Serration pitch: 0.75 mm - Dimensions: 80 x 60 mm - Including specimen stop SOFTWARE: - testXpert III (Master test method, 3rd license) - Includes layout, results, export, channel, report and organization editors - Includes Virtual Testing Machine (VTM) PC system: DELL with touch monitor CONDITION: Used, fully functional, good condition. The machine was in operation until recently. SERVICE: Fully maintained and calibrated (2022 / 2023 / 2024 / 2025) SCOPE OF DELIVERY: - Zwick/Roell RetroLine 50 kN testing machine - PC system with testXpert III software - 50 kN load cell - Extensometer / measuring sensor - Gripping tools / jaws - Documentation Dossier: DO737620 Article ID: 25131 Inspection by appointment possible. Subject to change and errors.

Condition: used, Year of construction: 1998, Briquette press Ijdpfxewh I Ure Am Ieia Weima TH 400 Year of construction 1998 Briquette diameter 50mm Capacity 60-80kg/h Machine no. 950-756 Main motor 7.5kW 200 Bar, 400V Including large collection container Machine is currently not working, the hydraulic block is leaking. - Year: 1998 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, We are offering this very rarely used oil tempering unit. It was utilized for research purposes. The unit still contains the thermal oil. The two connection hoses (no guarantee) are also included. Two units are available; please see the second listing. Both are of equal specification. Please send your price offer—and allow some time for a response, as we handle these matters alongside our main activities. The unit must, if not already done, be dismantled and disconnected by your own qualified personnel. All transport-related procedures and requirements are to be carried out at your own expense and risk. The buyer is liable for any (consequential) damages occurring on the premises. Pickup must be completed within 14 days of sale. Ijdjyk Dr Depfx Am Ioia

Condition: used, Padovan Green Filter 18 m² mobile Kieselgur stainless steel plate filter, Aisi 304 - condition: used - location: Bremen Ijdpfot Eb Azox Am Ieia - total height: 2.950 mm - total length: 2.250 mm - total width: 1.500 mm remarks: - Filter medium: diatoms; - tank with agitator for the preparation of diatoms; - Underbody opening diameter: approx. 400 mm;

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 510 h, * 510 hours * Lifting height up to 15 meters * Load capacity 5,500 kg * Quick coupler * Forks and bucket * Like new condition Isdpfxjyu Hylj Am Ioia

Condition: used, Year of construction: 2021, operating hours: 1,165 h, load capacity: 6,000 kg, fuel type: diesel, construction height: 10,000 mm, gearing type: automatic, Equipment: cabin, head guard, * Magni TH 6.10-D7/D telescopic handler Iodsyq Dblspfx Am Ijia * Year of manufacture: 2021 * Operating hours: 1,165 h * Radio remote control * Max. lifting capacity: 6,000 kg * Lifting height: 10 m * 4x4x4 / all-wheel drive / all-wheel steering * Hydraulic connections available * Rear-view camera * More photos and videos via Whatsapp * Information provided without guarantee, subject to prior sale.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 1,600 rpm, travel distance X-axis: 368 mm, travel distance Z-axis: 2,900 mm, total height: 1,925 mm, total width: 1,525 mm, overall weight: 3,820 kg, product length (max.): 5,278 mm, number of axes: 2, Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine. • Type and highlights • Leading and traction spindle lathe, high flexibility, precision and cost-effectiveness • With digital position indicator prepared (see Additional equipment) and quick-change steel holder (see Additional equipment) • Shipping information • Packaging metrics: Length 4770 mm, Width 1150 mm, Height 1840 mm • Weights: Gross 4480 kg, Net 3870 kg • Technical data • Load bearing capacity 1,4 t/m • Work areas: • Max. height 400 mm • Swing diameter above machine bed 800 mm • Swing diameter above planing slide 570 mm • Bed width 400 m • Max. width 3050 mm • Swing diameter in bed bridge 1035 mm • Turning length in bed bridge 250 mm • Speed range: • Number of gears 16 • Fast motion speed: • Rapid motion speed 3800 mm/min • Explanations about rapid motion max. 5 min (30 min. break) • Electrical data: • Drive motor output 11 kW • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connections: Total rated value 12 kW • Cooling lubricant system: • Coolant pump output 150 W • Spindle: • Spindle chuck Camlock DIN ISO 702-2 No. 8 • Spindle bore/rod passage diameter 105 mm • Spindle cone Ø113 (cone 1:20) mm • Tool holder max. chuck height 32 mm • Tailstock: • Tailstock chuck MK 5 • Tailstock quill stroke 235 mm • Tailstock quill diameter 90 m • Pitches: • Metric pitch 0,45 – 120 mm/rev (54 pitches) • Imperial pitch 80 – 7/16 Gg/1" (60 pitches) • Diametrical pitch 7/8 – 160 (42 pitches) • Modular thread pitch 0,25 – 60 mm/rev (46 pitches) • Travel: • Travel upper slide 230 mm • Travel carriage saddle 2900 mm Iodpfx Amjyxncdj Ioia • Travel cross slide 368 mm • Feed: • Longitudinal feed range 0,044 – 1,48 mm/rev (25 feeds) • Flat feed range 0,022 – 0,74 mm/rev (25 feeds) • Design features and safety • Hardened and ground Z-axis guideway • Spindle mount Camlock DIN ISO 702-2 No. 8 • Precisely crafted sled; all guides adjustable by wedge strips • Adjustment range upper slide ± 90° • Guaranteed concentricity of the spindle nose better than 0.015 mm • Waves, wheels and main spindle running in oil bath • Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings • Clear selection lever for switching the feed rates • Closed design of the rapid-action feed gear • Gears and shafts hardened and ground in an oil bath in precision bearings • Handwheels decoupled and tested according to EN 23125 • Two-channel right-left switch tested to EN 23125 • Switch with life cycle calculation, tested according to EN ISO 13849 • Right/left rotation on bed carriage via switching spindle switchable • Central lubrication in the bed slide • Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN • Leading spindle • Emergency stop blow switch, motor protection switch, lockable main switch • Emergency stop device with foot control • Safety handwheels with release function in the X-axis • Handwheels with adjustable fine scale 0.04 / 0.02 mm • Tailstock for taper turning ± 10 mm adjustable • Tailstock quill and handwheel with adjustable fine scaling

Condition: used, Year of construction: 2008, power: 90 kW (122.37 HP), Hacker Rudnick&Enners RE-TH 250/650/5 250 mm height 650 mm width Power 90 kW Cassel metal separator Approx. 40 linear meters of vibrating troughs Isdsy Adk Sepfx Am Ijia

Condition: excellent (used), Year of construction: 2010, Control: Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Table size: 1450 x 610 mm Spindle speed: 12,000 rpm Isdpfx Amsywpfwj Ioia Tool magazine for 30 tools, SK 40 Through-spindle coolant 3D probing system

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Iedpfxeyv A Dks Am Ioia Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)