Used Stas Osl 9.70 "Agrolight" 50M³ for sale (7,251)

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System Lrjdpfx Abe Adxhieysu According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, axle configuration: 3 axles, first registration: 04/2011, loading space length: 9,000 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, total length: 11,500 mm, total width: 2,600 mm, total height: 3,700 mm, tire size: 425/65R22.5, tire condition: 60 %, color: red, Equipment: ABS, General Information Year of manufacture: 2011 Axle Configuration Tire size: 425/65R22.5 Rear axle 1: Tire tread: 60%; Reduction: single reduction Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 70%; Reduction: single reduction Weights Unladen weight: 7,500 kg Payload: 37,500 kg GVW: 45,000 kg Functional Body manufacturer: OTHER Lodpozuw Ncofx Abysru Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: good (used), clear span: 1,800 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 9,540 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 9,540 mm Number of bays per row of shelves: 05 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 100 pcs. Total pallet spaces: 100 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 06x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 90x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg 45x fitted shelving, second-hand Design: with notches Material color: hot-dip galvanized Total depth: approx. 1,060 mm (bearing bar direction) for upright depth: approx. 1,050 mm Internal depth: approx. 1,056 mm Total width: approx. 1,780 mm (crossbar direction) Support bar spacing: 28|1.50 mm Crossbar support: approx. 58 mm Frame height: approx. 44 mm Mesh width: approx. 33 x 33 mm Weight per unit: approx. 33.310 kg Internal designation: GR-76 180x locking pin, used Material color: sendzimir galvanized For securing the side rails against unintentional lifting out 24x bolt anchor, new Lredotyyr Sopfx Abyju Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, clear span: 1,800 mm, total width: 1,050 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 11,430 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 11,430 mm Number of bays per row of shelves: 06 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 120 pcs. Total pallet spaces: 120 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 07x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 07x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 108x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg 216x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 28x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Lodpfx Abotznl Ioyjru Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shim plate, used Version: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic data: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels (400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x shelf uprights, used Material color: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Upright height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled ( bolted framework ) 02x foot plates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf crossbars, used Material color: orange Beam type: PNBH0488 Box profile: 80 x 50 mm clear width: 1,350 mm 16x locking pins, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 32x open-fronted storage boxes, second-hand Material color: various Lodpfx Absrp E N Deyjru Manufacturer: SSI Schäfer Crate designation: LF 511 G ZW Outer dimensions LxWxH: 500 x 156 x 143 mm Internal dimensions LxW: 448 x 123 mm Weight / unit: approx. 0.785 kg 01x chipboard, used Thickness chipboard: 38 mm Width chipboard: 1,550 mm Depth chipboard: 1,000 mm Surface: coated if required (two-piece if necessary) 01x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,330 mm Depth of chipboard: 1,000 mm Surface: coated if required (two-piece if necessary) 02x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,330 mm Depth of chipboard: 400 mm Surface: possibly coated (two-piece if necessary) 24x locking brackets, new Version: galvanized f. Crossbeam width: 50 mm The pictures serve to illustrate the material. The material color may vary. - The packing tables are picked unassembled; - The shelf stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. General information about the item: This item is only offered for collection. Any other desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, first registration: 09/2019, STAS 3 - Full Aluminum Axle - Grain Tipping Trailer SHAKER / VIBRATOR!!! • ABS • EBS • WABCO SmartBoard • ALCOA rims • 3 x air-suspended 9-ton JOST / SAF axles • Lifting/lowering system • Lift axle (1st axle) • GVWR: 39,000 kg • Tare weight: 5,710 kg • Payload: 33,290 kg • Tire size: 385 / 65 R 22.5 • Tire tread: 80 - 90%! • Platform • Roller shutter • Work lights • Pneumatic rear door release • Automatic / pneumatic venting during tipping • Overall trailer length: 10,227 mm • Volume: 55 cubic meters - 1st owner - German trailer - TÜV (technical inspection): new! Lrsdjz Ezu Ispfx Abysu Errors and prior sale excepted! = Further information = Year of manufacture: 2019 Tare weight: 5,710 kg

Condition: used, axle configuration: 3 axles, first registration: 02/2005, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes = More information = Lrsdpfx Aez A U Ddobysu Year of construction: 2005 Tyre size: 385/65 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Rear axle 2: Tyre profile: 30% Rear axle 3: Tyre profile: 30%

Condition: used, axle configuration: 3 axles, first registration: 05/2012, suspension: air, tire size: 385/65 R22.5, color: other, General Information Lodpfx Abjzxmnioyjru Year of manufacture: 2012 Axle Configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Tire tread depth left: 8 mm; Tire tread depth right: 5 mm Rear axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Rear axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Weights Unladen weight: 5,890 kg Payload: 32,110 kg GVW: 38,000 kg Condition Damage: None

Condition: used, axle configuration: 3 axles, first registration: 09/2008, suspension: air, tire size: 385/65 R22.5, color: other, General Information Year of manufacture: 2008 Axle Configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Rear axle 2: Aluminum rims; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Rear axle 3: Aluminum rims; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Lsdpozgmazefx Abyeru Weights Unladen weight: 4,890 kg Payload: 33,110 kg GVW: 38,000 kg Condition Damage: None

Condition: used, maximum load weight: 31,190 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 03/2027, loading space length: 13,353 mm, loading space width: 2,473 mm, loading space height: 2,753 mm, Year of construction: 2019, Equipment: ABS, * NET PRICE * Steel/Steel tipper body * Jost axles with disc brakes * Lifting axle * Platform * Roll tarp * Wabco Smart Board * Portal doors * 2 x grain augers * LxWxH: 13.35 x 2.47 x 2.75 * Tare weight: 7,810 kg * German vehicle WhatsApp: Errors and prior sales excepted! Sale is made excluding any warranties! Ljdpfx Abe Ad Sncsyjru - We speak Russian - We speak English - We speak Polish - We speak Turkish - We speak Spanish

Condition: used, axle configuration: 3 axles, first registration: 09/2013, suspension: air, tire size: 385/65 R22.5, color: other, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; tire tread depth left: 10 mm; tire tread depth right: 10 mm Rear axle 2: Tire tread depth left: 7 mm; tire tread depth right: 8 mm Rear axle 3: Tire tread depth left: 5 mm; tire tread depth right: 6 mm Weights Unladen weight: 5,340 kg Payload: 32,660 kg Lsdpfsz Hukxjx Abyeru GVW: 38,000 kg Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 09/2018, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for exceptionally high stability and strength, reinforced crossmembers 140 mm high (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer construction max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard info center, electronic brake wear indicator readable in the central control unit (display). First axle with starting aid (new EC regulation, without central control unit option). Optiturn function on the third axle. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on Alcoa Durabright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 ton support load with swivel foot. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 round three-chamber lights, type Aspöck LED, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket. With side marker lights in LED design. 2 reflective panels on the rear. Position lights at the front: 2x white, rear: 2x red, 1 rear light integrated in the underbody protection. 2 LED work lights on the support height and behind the 3rd axle. 4 LED lights in the rear support. 1 fog light, round, in the underbody protection. Superstructure/Dump Body: "Superstructure fully welded inside", reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum dump body, side walls with 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belts. Plank profiles fully welded inside. Floor laid as a sliding floor system on 140 mm aluminum crossmembers. Floor stacker load approx. 10 tons/m2. Crossmembers mounted closely together (approx. 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locks, attached in the welded aluminum rear frame in Teflon and stainless steel bearings. Doors secured in the open position with one chain on each side. Hard wear plates on the side walls, approx. 6,000x2,000x4 mm, fully welded. Moving residue discharge wall with Kevlar sheeting, approx. 1,800 mm long plus side Kevlar sheeting seal. Service door in the front wall with a ladder, opens inwards. Hydraulic System: "Cargo - Floor" sliding floor system, overlapped. Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 1386 PE-HD sliders plus anti-lifting slide bearings, type CF Overlapped 11 mm design. Hydraulics with approx. 200 mm working stroke. Fixed supports on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed supports. Line size NW 21. Fixed supports with size and Lrodpfx Aj Ad Ti Uobyou

Condition: used, axle configuration: 3 axles, first registration: 04/2018, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction, max. 39,000 kg) Axles and Suspension: "Disc brake 22.5" Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function. Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display). First axle with starting assist (new EC regulation, without control unit). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Kingpin: Ledpfx Ae Adxgxobyeru 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with swivel base. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles, operated from the rear. Aluminum air tank system. Electrical System: According to EC standards 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket. Side marker lights in LED design. 2 reflective panels on the rear. Front position lights 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. 2 separate LED reversing lights on the sides, approximately at the level of the supports. Superstructure/Body: "Superstructure fully welded inside", reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum body, side walls: 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower belt. Plank profiles fully welded inside. Floor laid out as a sliding floor system on 140 mm aluminum cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approximately 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, straight design. Special aluminum corner profiles in a sloping design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 twist-lock fasteners, mounted in the welded aluminum rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving residual unloading wall with Kevlar sheet, approximately 1,800 mm long, plus side sealing with Kevlar sheet. Aluminum wear plates on the sides and rear, approximately 2,000x1,500x4 mm. Service door in the front wall. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approximately 880 PE-HD sliders, plus anti-lifting slide bearings. Type CF, 10 mm floor, ribbed design. Hydraulics with approximately 200 mm working stroke. Locking units, type "Faster". Line size NW 21. Locking units with size and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, watertight box. Sliding floor rotated/wear

Condition: used, axle configuration: 3 axles, first registration: 05/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Aluminum chassis with reinforced continuous frame. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Crossmembers, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of aluminum up to the support structure (trailer design, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9-ton version with DCA air suspension, raising and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable on the control unit (display), 1st and 3rd axles liftable with starting assist (new EC regulation, without control unit option), 3rd axle with Optiturn control. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20-ton support load with swivel foot. Lodpfo Ad Ti Ijx Abysru Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll-Stability-Support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to EC standards 91/633 and 97/28, with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, front position lights 2x white, rear 2x red, 2 separate LED reversing lights behind the 3rd axle, 2 separate LED reversing lights on the sides, approximately at landing gear height, 1 LED interior light. Superstructure/Body: "Superstructure fully welded inside," reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum body, side walls: 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded in with upper and lower belt. Plank profiles fully welded inside, floor designed as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a sloping design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locking mechanisms, mounted in a welded aluminum rear frame in Teflon and stainless steel bearings, doors secured in the open position with one chain each on the sides, moving residual unloading wall with Kevlar lining, approx. 1,800 mm long, plus Kevlar seal on the sides, aluminum wear plates on the sides and rear, approx. 2,000x1,500x4 mm, service door in the front wall. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically operated aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders, in addition to anti-lifting slide bearings, type CF, 10 mm floor, ribbed design. Hydraulics with approx. 200 mm working stroke, line size NW 21, fixed halves with a size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left, with remote control integrated into a lockable, waterproof bo

Condition: used, maximum load weight: 30,140 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2014, next inspection (TÜV): 07/2026, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Year of construction: 2014, Equipment: ABS, Well-maintained aluminum box body, Stas S300CX, for grain transport. Features: Lift axle Lodszmdbpjpfx Abyeru Platform at the front wall Roll-up tarpaulin Grain sack Grain slide Combination rear door with 1/3 and 2/3 opening Foldable rear underrun protection Lateral underrun protection Toolbox For questions regarding the equipment, please call. Errors and prior sale excepted!

Condition: used, maximum load weight: 33,110 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2015, loading space volume: 46 m³, Equipment: ABS, Stas three-axle grain tipper, volume approximately 46 m³, portal doors with 2 grain slides, tarpaulin cover, platform, air suspension, lift axle, disc brakes, BPW axles, aluminum rims, Wabco SmartBoard, EBS, ABS. Lrodpfx Abj Abyzfeyou

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Body/Container: Body completely welded on the inside, reinforced side walls. Lrsdpfez S St Nsx Abyeu Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 09/2026, loading space length: 13,179 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, Equipment: ABS, * Stas walking floor trailer * Tarp cover * Alloy wheels * SAF axles Lrsdpjxu Th Uefx Abyou * Unladen weight: 7,790 kg * Year of manufacture: Internal vehicle number: 11498-----Errors and prior sale reserved.

Condition: used, axle configuration: 3 axles, first registration: 10/2023, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" JOST (formerly DCA) axle units, 3 x 9 tons, with air suspension, air bellows arranged centrally to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approx. 60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts, aluminum rims Kingpin: 2" - screwed into an 8 mm thick plate "light" Landing gear: Landing gears with two speeds, 2x 20 tons support load. We use swivel feet for air suspension. Braking system: According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system: Lrjdpj Adxg Eofx Abyeu According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights, type Aspöck, 24-volt system with 2x 7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights 1 LED inside on the front wall All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed: Fully welded interior Aluminum dump bed, side walls made of 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide, bottom made of 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall reinforced, 4 mm, in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded to the rear doors on the side and bottom, rear doors partially covered with smooth aluminum, operation of the universal door automatically-pneumatically with a separate lever that can be locked, rear support outriggers made of ALU, swiveling, two tie-down straps with rubber buffers attached to the frame on the front wall of the tipping bed, Hydraulic system: Tipping cylinder with "small" housing Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5 m hydraulic hose and coupling half 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder made of aluminum, side underrun protection on the right in a foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additional centrally mounted support holder for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with tarpaulin system, circumferential rubber cord in the rear end of the tarpaulin to be attached with two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection made of aluminum, 2 "Clear- Pass" splash guards on the fender according to EG standard, an aluminum grain chute with a tarpaulin bag attached to the side

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights 1 LED work light inside at the front All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump body: interior fully welded Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Lrjdps Adxg Ssfx Abysu Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, functionality: fully functional, axle configuration: > 3 axles, first registration: 05/2021, tire condition: 60 %, color: light grey, Year of construction: 2021, Universal gate / Steel chassis / HARDOX body Lsdpfx Abjznkv Nsysru CRAMARO tarpaulin / Pneumatic tires Aluminum rims 26 m3

Condition: used, axle configuration: 3 axles, first registration: 09/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Crossmembers, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction max. GVWR up to 39,000 kg) Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) readable in the central control unit (display), 1st and 3rd axle lift including Optiturn and Optiturn. 1st axle with starting aid (without central control unit), tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors. Lredpfxoz S St As Abyju Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. King Pin: 2" bolted into a 10 mm thick plate. Braking System: According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum compressed air system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lamps, type Aspöck Eco LED 3, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. Audio alarm when reversing. Superstructure/Body: Body fully welded inside. Reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt. Plank profiles fully welded inside. Floor laid as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2. Crossmembers mounted close together (approx. 350 mm). Aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in the welded aluminum rear frame on Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Hard wear plates on the side walls, approx. 2,000x1,500x4mm, fully welded. Sliding residual discharge wall with Kevlar sheet, approx. 1,800 mm long, plus side Kevlar sheet seal. Service door on the left in the front wall, opening inwards. Hydraulic System: "Cargo - Floor" sliding floor system. Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed brackets on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed brackets. Line size NW 21. Fixed brackets with dimensions and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical control integrated in a lockable, watertight box on the l

Condition: used, maximum load weight: 29,710 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, loading space length: 10,610 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5748 Rental vehicle – available for purchase, rental, or lease with an option to buy, upon agreement. STAS 60 m³ sliding floor trailer with Cargo Floor and remote control – for rent! ----* Manufacturer: Stas * Type: Farmstar * First registration: 04/2026 * Color: Body RAL 9007 grey-aluminum, chassis RAL 9005 black, tarpaulin black * Volume: 60 m³ (approx. 10.61m long x 2.475m wide x 2.30m high) * Gross vehicle weight: 39,000 kg (technical) / 36,000 kg (permissible) * Unladen weight according to vehicle registration: 6,290 kg * Payload: 29,710 kg * Axles: 3x Jost axles / 1st axle: lift axle / starting aid / disc brake * Tires: 385/65R 22.5 NEW on Speedline Diamond aluminum rims * Suspension: Air suspension with raising and lowering function * EBS Wabco * CARGO FLOOR CF 500 SL-C with remote control * 21-slat system with additional plastic profiles below the floor profiles * End caps, floor made of stainless steel * Floor 6mm ribbed * Moving bulkhead with stainless steel handles * Control box at the rear, left side * Control platform with access ladder at the front, right and left side * Hydraulic connections at the front with 3m hoses (with additional connection option to the support legs) * Pressure 1" female * Return 1" female * Swing door (50/50) with 2x twist locks and 1x pneumatic locking * Side walls in smooth design, inside and outside (grain version), welded * Roll-up tarpaulin (680g/m²) with central locking * 3x crossbeams * Individual fenders * Full-load supports * Toolbox at the rear, right side Lrjdpfx Absyz H S Asyou * Shovel and broom holder, left side * Smartboard * TPMS tire pressure monitoring system * Aluminum ladder, right side * Extendable ladder at the rear, right side * Aluminum rear impact guard * One-piece aluminum sheet, foldable, for protecting the rear lights * 2x LED work lights (left + right) * 2x LED reversing lights at the rear * 2 x 3 LED?s in the door closure crossbar Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have occurred in the text or the details provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 09/2026, loading space length: 10,149 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 55 m³, Year of construction: 2023, Equipment: ABS, ferroSTAR 54.9 cbm iron gray Chassis type: Z-chassis Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2325 Technically permissible total weight: 39 = 12 + 9 + 9 + 9 Interior height front (mm) (IHF): 2285 Interior height rear (mm) (IHB): 2285 Volume (m³): 54.9 Overall width (mm): 2550 Wheelbase (mm) (WB): 6600 Overall length (mm): 11520.836 Chassis material: Steel Tire dimension: 385/65R22.5 Loading length (mm): 10149 Axle manufacturer: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 Offset (ET): 120 Option 1: Axle with lift axle and starting aid Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times Air suspension: ECAS with lifting and lowering valve Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis Coupling head: Pneumatic, European Palm coupling Tire brand: Manufacturer's choice Rims: Steel Tire type: Regional Wheel nuts: Open Wheel nut caps: Plastic Lrsdpfszmcn Uex Abyou Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair Operation of underride protection: Manual Position of Smartboard: On the left side, in the direction of travel, in front of the axles Toolbox: On the left side, in the direction of travel, in front of the axles Spare wheel holder: On the right side, in the direction of travel, below the chassis Number of splash guards on the fender: 2 pieces Type of splash guard on the fender: Clear Pass Manufacturer of lighting: Aspöck Type of lighting: ECOLED II Work lights (operated via switch): Included Position of work lights (operated via switch): 2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice) Type of tilting cylinder: Hydraulic cylinder with small housing Cylinder tilting angle: Normal Model of tilting cylinder: Hyva - FC 169 Stroke of tilting cylinder: 7130 Hydraulic coupling: Swivel coupling Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose: 2,100 mm Type of Smartboard: ECAS control box Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel Broom and shovel holder: Included Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel Position of broom and shovel holder: On the front wall, on the left in the direction of travel Load manometer: Ø 63 mm - mounted on the side of the instrument panel Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection Mounting of splash guard for underride protection: Flexible Plastic support wedges: With two plastic support wedges including holder Air and electrical console: Mounted on the right in the direction of travel Rear wall type: Swing doors A-sign: Foldable on the rear wall, mounted on the right in the direction of travel Floor: Made of 6 mm HB450 Position of rubber supports: Mounted below the floor

Condition: used, empty load weight: 7,840 kg, maximum load weight: 28,160 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | STAS sliding floor | Type S300ZX, remote control | Tool box | 1 axle lift | Air suspension | Spare wheel holder | Unladen weight 7,840 kg, payload 28,160 kg | Tires: 385/65 R22.5 | SAF axles with disc brakes | Valid inspection report until 04/2026 | 10mm floor | Subject to errors, typing errors, and prior sale. Lsdpfx Abszr R A Rjyoru