Used Stas 13.50 "Ecohddisc93" 92,5M³ 10Mm Boden for sale (6,387)

Condition: used, axle configuration: 3 axles, first registration: 04/2018, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction, max. 39,000 kg) Axles and Suspension: "Disc brake 22.5" Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function. Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display). First axle with starting assist (new EC regulation, without control unit). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with swivel base. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles, operated from the rear. Aluminum air tank system. Electrical System: According to EC standards 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket. Side marker lights in LED design. 2 reflective panels on the rear. Front position lights 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. 2 separate LED reversing lights on the sides, approximately at the level of the supports. Superstructure/Body: "Superstructure fully welded inside", reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum body, side walls: 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower belt. Plank profiles fully welded inside. Floor laid out as a sliding floor system on 140 mm aluminum cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approximately 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, straight design. Special aluminum corner profiles in a sloping design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 twist-lock fasteners, mounted in the welded aluminum rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving residual unloading wall with Kevlar sheet, approximately 1,800 mm long, plus side sealing with Kevlar sheet. Aluminum wear plates on the sides and rear, approximately 2,000x1,500x4 mm. Service door in the front wall. Prede Adxgxspfx Akioc Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approximately 880 PE-HD sliders, plus anti-lifting slide bearings. Type CF, 10 mm floor, ribbed design. Hydraulics with approximately 200 mm working stroke. Locking units, type "Faster". Line size NW 21. Locking units with size and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, watertight box. Sliding floor rotated/wear

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: Pjdpfx Ajz S St Nokierc 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Body/Container: Body completely welded on the inside, reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: used, axle configuration: 3 axles, first registration: 05/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Aluminum chassis with reinforced continuous frame. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Crossmembers, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of aluminum up to the support structure (trailer design, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9-ton version with DCA air suspension, raising and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable on the control unit (display), 1st and 3rd axles liftable with starting assist (new EC regulation, without control unit option), 3rd axle with Optiturn control. Prsdpfxj Ad Ti Ie Akisc Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20-ton support load with swivel foot. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll-Stability-Support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to EC standards 91/633 and 97/28, with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, front position lights 2x white, rear 2x red, 2 separate LED reversing lights behind the 3rd axle, 2 separate LED reversing lights on the sides, approximately at landing gear height, 1 LED interior light. Superstructure/Body: "Superstructure fully welded inside," reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum body, side walls: 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded in with upper and lower belt. Plank profiles fully welded inside, floor designed as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a sloping design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locking mechanisms, mounted in a welded aluminum rear frame in Teflon and stainless steel bearings, doors secured in the open position with one chain each on the sides, moving residual unloading wall with Kevlar lining, approx. 1,800 mm long, plus Kevlar seal on the sides, aluminum wear plates on the sides and rear, approx. 2,000x1,500x4 mm, service door in the front wall. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically operated aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders, in addition to anti-lifting slide bearings, type CF, 10 mm floor, ribbed design. Hydraulics with approx. 200 mm working stroke, line size NW 21, fixed halves with a size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left, with remote control integrated into a lockable, waterproof bo

Condition: used, axle configuration: 3 axles, first registration: 09/2018, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for exceptionally high stability and strength, reinforced crossmembers 140 mm high (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer construction max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard info center, electronic brake wear indicator readable in the central control unit (display). First axle with starting aid (new EC regulation, without central control unit option). Optiturn function on the third axle. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on Alcoa Durabright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 ton support load with swivel foot. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum air tank system. Electrical System: Pedpfxj Ad Ti Uj Akijrc According to the guidelines of EC standards 91/633 and 97/28 with 2 round three-chamber lights, type Aspöck LED, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket. With side marker lights in LED design. 2 reflective panels on the rear. Position lights at the front: 2x white, rear: 2x red, 1 rear light integrated in the underbody protection. 2 LED work lights on the support height and behind the 3rd axle. 4 LED lights in the rear support. 1 fog light, round, in the underbody protection. Superstructure/Dump Body: "Superstructure fully welded inside", reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum dump body, side walls with 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belts. Plank profiles fully welded inside. Floor laid as a sliding floor system on 140 mm aluminum crossmembers. Floor stacker load approx. 10 tons/m2. Crossmembers mounted closely together (approx. 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locks, attached in the welded aluminum rear frame in Teflon and stainless steel bearings. Doors secured in the open position with one chain on each side. Hard wear plates on the side walls, approx. 6,000x2,000x4 mm, fully welded. Moving residue discharge wall with Kevlar sheeting, approx. 1,800 mm long plus side Kevlar sheeting seal. Service door in the front wall with a ladder, opens inwards. Hydraulic System: "Cargo - Floor" sliding floor system, overlapped. Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 1386 PE-HD sliders plus anti-lifting slide bearings, type CF Overlapped 11 mm design. Hydraulics with approx. 200 mm working stroke. Fixed supports on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed supports. Line size NW 21. Fixed supports with size and

Condition: used, axle configuration: 3 axles, first registration: 11/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Crossmembers, 140mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the subframe (trailer construction max. 39,000 kg). Psdpfxe Afr Hhj Akijrc Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the central control unit (display). 1st and 3rd axles can be lifted. 1st axle with starting assist (without central control unit option). Optiturn and Optiload function. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5 ET 120. Tire pressure monitoring system. Kingpin: 2" bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to E.G. standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum air reservoir system. Electrical System: According to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket. Lateral marker lights in LED design. 2 reflective panels on the rear. Position lights in front, 2x white, rear, 2x red. 2 separate LED reversing lights integrated in the U-profile. 2 separate LED work lights left and right on supports. 3 LED lights in the rear crossbar. Superstructure/Body: Body fully welded inside, reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum body, side walls 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt. Plank profiles fully welded on the inside. Floor as a sliding floor system on 140 mm aluminum crossmembers. Floor load capacity approx. 9 tons/m2. Crossmembers mounted relatively closely (approx. 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum hinged doors, 50/30 mm thick, with 2 swivel latch locks, attached in the welded aluminum rear frame in Teflon and Inox bearings. Doors secured in the open position with one chain each on the side. Trailing residual unloading wall with Kevlar sheet, approx. 1,500 mm long, plus side Kevlar sheet sealing. Service door in the front wall with a ladder that opens inwards. Hydraulic System: "Cargo - Floor" sliding floor system. Sliding floor system in the floor with hydraulically operated aluminum profiles on aluminum square profiles, with approx. 880 PE-HD sliders. Type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed parts on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed parts. Line size NW 21, operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical operation at the rear left with a radio remote control integrated in a lockable, waterproof box, wi

Condition: used, axle configuration: 3 axles, first registration: 09/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Crossmembers, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction max. GVWR up to 39,000 kg) Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) readable in the central control unit (display), 1st and 3rd axle lift including Optiturn and Optiturn. 1st axle with starting aid (without central control unit), tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. King Pin: 2" bolted into a 10 mm thick plate. Braking System: According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum compressed air system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lamps, type Aspöck Eco LED 3, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. Audio alarm when reversing. Superstructure/Body: Body fully welded inside. Reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt. Plank profiles fully welded inside. Floor laid as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2. Crossmembers mounted close together (approx. 350 mm). Aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in the welded aluminum rear frame on Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Hard wear plates on the side walls, approx. 2,000x1,500x4mm, fully welded. Sliding residual discharge wall with Kevlar sheet, approx. 1,800 mm long, plus side Kevlar sheet seal. Service door on the left in the front wall, opening inwards. Hydraulic System: "Cargo - Floor" sliding floor system. Predpfjz S St Aox Akiec Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed brackets on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed brackets. Line size NW 21. Fixed brackets with dimensions and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical control integrated in a lockable, watertight box on the l

Condition: used, empty load weight: 7,840 kg, maximum load weight: 28,160 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | STAS sliding floor | Type S300ZX, remote control | Tool box | 1 axle lift | Air suspension | Spare wheel holder | Unladen weight 7,840 kg, payload 28,160 kg | Tires: 385/65 R22.5 | SAF axles with disc brakes | Valid inspection report until 04/2026 | 10mm floor | Subject to errors, typing errors, and prior sale. Podpfezr R A Rex Akisrc

Condition: new, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5739 Immediately available! Purchase, lease or lease with purchase option available upon agreement! Approx. 91m³ Stas moving floor trailer with 10m floor / radio remote control / front maintenance door / RENTAL / PURCHASE ---- * Manufacturer: Stas * Model: S300ZX Biostar * Year of manufacture: 2026 * Gross vehicle weight: 42,000 kg * Unladen weight (manufacturer specifications): 7,800 kg * Payload: 34,200 kg * Axles: 3x SAF, 1st axle lift axle with starting aid / disc brakes * Tyres: 385/65 R22.5 on steel rims * Suspension: air suspension with ECAS lift/lower function * EBS * Capacity: approx. 91m³ (13.50 m long x 2.47 m wide x 2.82 m high) * Colour: Body RAL 9006 / tarpaulin black SIO7999 / galvanized chassis * Twin rear doors with pneumatic locking * Extendable access ladder on right-hand side * Lift axle starting aid activated via truck control button * Smartboard * Telescopic landing legs * PVC toolbox 830x500x470 mm * 2 LED reversing lights, rear left and right * 2 LED reversing lights at rear supports * 1 LED front wall interior light * Ecoled 2 LED taillights * Cargo Floor 10 mm ribbed CF500SL-C -E Control * V2A stainless steel rear panel * Additional plastic guides below floor profiles * Radio remote control * Moving bulkhead wall * Rolling tarpaulin with Panama tension straps, 900 g/m² * Tarpaulin stoppers * Service door at front * 2 x 3 LED in the door crossbeam * Smartboard German trailer! German papers! NEW VEHICLE! Notice regarding possible listing errors: Despite careful preparation of this listing, occasional errors in the text or details cannot be excluded. We do not assume liability for mistakes, changes or interim sales. All information is supplied without guarantee. Please contact us to verify details or for further questions. Psdpfx Aeyz H Spokierc

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Side tarpaulin can be retrofitted at an extra cost! Stas 91 m² sliding floor / 10 mm flat floor / TÜV cargo certificate ----* Manufacturer: Stas Prsdov Emk Uspfx Akiec * Type: BIOSTAR - Sliding floor * First registration: - (New vehicle) * Color: Chassis galvanized, body RAL 7016 silver-grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Total weight: 36,000 kg * Unladen weight according to vehicle registration: 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1 lifting axle / starting aid / disc brake * Tires: 385/65 R22.5 New on Speedline Diamond aluminum rims * Wheelbase: 7.85m * Suspension: ECAS air suspension with lifting and lowering * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box at the rear left * 21 floorboards, 10mm flat * 12 pairs of recessed lashing eyes in the floor * End caps made of aluminum, welded * Complete discharge wall with brushes and stainless steel handles * Service door in the front wall * Double doors (50/50) with pneumatic locking * 2x twist locks for locking * Door closing crossbeam, swiveling * Hydraulic connections at the front with 3 m hoses and * Connection option below the body without hoses * Operating platform with ladder at the front left * Saddle height: 1150mm * Individual mudguards * Full load supports * Aluminum lighting protection at the rear (one-piece, foldable) * Roll tarp (900g/m²) with tension straps * Steel bars, foldable, and tension straps along the sides * 1x toolbox at the rear left * 1x aluminum ladder 3.80m long * Tire pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminum bumper buffer at the rear * 1x extendable ladder at the rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light in the front wall inside * 2 x 3-function lamps at the top in the door crossbar New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Note on possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, maximum load weight: 30,840 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Knapen 3-axle SANH sliding floor trailer with electric roll cover, available from stock! * BPW 9-ton ECO Air HD rigid axle with disc brakes 430, 10-bolt, ET-120 * TireCheck tire pressure monitoring system * Smart Board * A-axis lift axle including starting aid Prjdpfxez Iuw Uj Akiec * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF * Gearbox-supported winch with push compensation, pivoting mud flaps * Plastic toolbox 1000x500x500mm * Water tank 28 L with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder * CARGOFLOOR CF-500 SL-C system, electric operation * Ribbed aluminum floor boards, 10 mm, 21 boards * Wear plates on the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear, under the floor * Platform on the front wall with ladder and safety switch to interrupt the power supply to the electric roll cover * Moving bulkhead * Rear doors with external locking bars * One locking bar per rear door * "A" sign (vertical hinge line) on the left rear door * Electric roll cover POWERSHEET, with remote control * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the welt on the left side wall, including fixed roll-fix operation at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Superstructure RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY

Condition: used, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 02/2027, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen K100 sliding floor semi-trailer, 92 m³, 10 mm floor, Powersheet * BPW axles with air suspension and disc brakes * 1st axle can be lifted * Tires: 385/65R22.5 * Powersheet electric cover * 10 mm floor * Storage box * Work lights * Moving bulkhead * Jost supports * Broom and shovel holder Prsdsz Rrh Djpfx Akijc We will be happy to provide you with further information.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Prsdpfx Aofi Nmpskisc Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Prjdpfofi Nmwsx Akijc Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 09/2026, loading space length: 13,179 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, Equipment: ABS, * Stas walking floor trailer * Tarp cover * Alloy wheels * SAF axles * Unladen weight: 7,790 kg Podpfexu Th Uox Akisrc * Year of manufacture: Internal vehicle number: 11498-----Errors and prior sale reserved.

Condition: used, maximum load weight: 29,710 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, loading space length: 10,610 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5748 Rental vehicle – available for purchase, rental, or lease with an option to buy, upon agreement. STAS 60 m³ sliding floor trailer with Cargo Floor and remote control – for rent! ----* Manufacturer: Stas * Type: Farmstar * First registration: 04/2026 * Color: Body RAL 9007 grey-aluminum, chassis RAL 9005 black, tarpaulin black * Volume: 60 m³ (approx. 10.61m long x 2.475m wide x 2.30m high) * Gross vehicle weight: 39,000 kg (technical) / 36,000 kg (permissible) * Unladen weight according to vehicle registration: 6,290 kg * Payload: 29,710 kg * Axles: 3x Jost axles / 1st axle: lift axle / starting aid / disc brake * Tires: 385/65R 22.5 NEW on Speedline Diamond aluminum rims * Suspension: Air suspension with raising and lowering function * EBS Wabco * CARGO FLOOR CF 500 SL-C with remote control * 21-slat system with additional plastic profiles below the floor profiles * End caps, floor made of stainless steel * Floor 6mm ribbed * Moving bulkhead with stainless steel handles * Control box at the rear, left side * Control platform with access ladder at the front, right and left side * Hydraulic connections at the front with 3m hoses (with additional connection option to the support legs) * Pressure 1" female * Return 1" female * Swing door (50/50) with 2x twist locks and 1x pneumatic locking * Side walls in smooth design, inside and outside (grain version), welded * Roll-up tarpaulin (680g/m²) with central locking * 3x crossbeams * Individual fenders * Full-load supports * Toolbox at the rear, right side * Shovel and broom holder, left side * Smartboard * TPMS tire pressure monitoring system Prsdpfx Ajyz H S Aekisc * Aluminum ladder, right side * Extendable ladder at the rear, right side * Aluminum rear impact guard * One-piece aluminum sheet, foldable, for protecting the rear lights * 2x LED work lights (left + right) * 2x LED reversing lights at the rear * 2 x 3 LED?s in the door closure crossbar Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have occurred in the text or the details provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, maximum load weight: 34,120 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 88 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS Walking Floor Semi-Trailer, 88 cbm First registration: 07/2024, from first owner Mileage: 217,742 km Internal dimensions (L x W x H): 13,513 x 2,475 x 2,536 / 2,752 mm Pjdpfx Ao Afr A Ajkierc >>> Saddle height 1,200 to 1,250 mm, also suitable for Hydrodrive axles > 1st and 3rd axles are lift axles >>> WABCO OptiTurn steering system to reduce the turning radius Air tank made of aluminum Tire size: 6x 385/65 R 22.5 Crank-operated saddle, JOST full-load model Lighting: ASPÖCK full-LED 4 x LED work lights Toolbox on the rear, left side Side walls: profile joints, completely welded on the inside CARGOFLOOR sliding floor with 21 slats, material thickness 10 mm, ribbed >>> with floor reinforcement for forklifts and full load, sliding bearings Control system with WIRELESS REMOTE CONTROL Rear end plate made of stainless steel Side rails: 2 pieces, reinforced waste management design Roof roll cover, reinforced design >>> Rear cross rail swiveling, can be operated from the ground RENTING is the new BUYING; with us, it is also immediately available in a FULL-SERVICE LEASE.

Condition: new, maximum load weight: 31,175 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,575 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock number: 5742 THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! Kraker approx. 92 m³ moving floor trailer with 10mm Cargofloor floor / remote control / wear plates / pneumatic underride guard / rental also possible! ---- * Manufacturer: Kraker * Model: K-Force - Moving Floor * First registration: - (NEW VEHICLE) * Color: Body RAL 9010 / Chassis MicroZinq / Tarp SIO 7999 Black * Technically permissible total weight: 39,000 kg * Unladen weight according to manufacturer: 7,825 kg * Payload: 31,175 kg * Volume: approx. 92 m³ (13.53 m long x 2.48 m wide x 2.369m/2.782m high) * Axles: 3x SAF with 1st axle as lift axle and starting aid / disc brakes * Tyres: 385/65R 22.5 on steel rims * Suspension: Air suspension with lift and lower * EBS Wabco * Chassis: Microzinc * Rear wear plates 1,250 x 2,500 x 3 mm * Double-wing rear doors with pneumatic locking * Operator platform at the front with access on the left * Saddle height: 1150mm * Cargo Floor CF 500 Compact floor with 21 floorboards * Floor 10mm thick, ribbed, with aluminium end caps * Operation via remote control and control box at the left rear * Rolling tarp with central locking * Sliding wall (moveable partition) made of aluminium with drag sheet * 2 plastic track cleaners on the sliding carriage * Extendable access steps at the rear right * 4 x pivoting steel roof bows, 50mm round * 2 x round LED tail lights per side * 2 x LED work lights at support leg height * 2 x LED reversing lights mounted laterally behind the axles * Plastic toolbox at rear left * Holders for broom and shovel * 10-step ladder Predeyawkxspfx Akisc * Hydraulic hoses at the front approx. 3.5 m long * Single mudguards * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard# AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! Note on possible errors in the listing: Despite careful preparation of this listing, there may occasionally be errors in the text or details. We assume no liability for errors, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or clarify any questions.

Condition: good (used), Year of construction: 2017, operating hours: 785 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 785 km, SEVERAL IN STOCK – This DUO electric stacker, manufactured by LINDE in 2017; Prjdpfx Aey R Alkjkiec - Has a capacity of 1,600 kg as a pallet truck. - Lifts 800 kg to a height of 1,010 mm. - The stacker is equipped with an INITIAL LIFT, making it ideal for uneven floors. - All functions are working properly. - Only 785 hours on the meter; - The stacker is equipped with a battery with an automatic filling system and an INTERNAL charger. - One battery cover is missing. - Delivered within three working days. - Ready for immediate use and, if desired, delivered with an inspection certificate. - Video to follow.

Condition: good (used), Year of construction: 2017, operating hours: 971 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 971 km, - This DUO electric stacker from the LINDE brand, manufactured in 2017; - Has a capacity of 1,600 kilograms when used as a pallet truck. - Lifts 800 kg to a height of 1,010 mm. - The stacker is equipped with an INITIAL LIFT system, making it ideal for use on uneven floors. - All functions are working properly. - Only 971 hours on the meter; - The stacker is equipped with a 2023 battery with an automatic filling system and an INTERNAL charger. - Delivered within three working days. - Ready for immediate use and, if desired, delivered with an inspection certificate. Prsdpfx Asxz Ebtjkisc - Video to follow.

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2025, next inspection (TÜV): 11/2026, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle STAS Walking Floor Semi-trailer, 90 cbm First registered 11/2025 Internal dimensions (L x W x H): 13,500 x 2,475 x 2,641 / 2,752 mm Axle distance: 1,310 mm Unladen weight: 8,090 kg Saddle height: 1,150 to 1,200 mm Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced “CD” version WABCO trailer EBS with anti-roll system (RSS) WABCO Smartboard with axle load display 1st and 3rd axles are lift axles Air tank, aluminum Tire size: 6x 385/65 R 22.5 JOST full-load swivel saddle Prsdpfx Aeyih R Sskioc Lighting: ASPÖCK full-LED 4 x LED work lights Toolbox at the rear, on the left side Side walls with profile joints, completely welded on the inside CARGOFLOOR sliding floor with 21 slats, material thickness 10 mm, ribbed Control system with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel 3 load securing bars, reinforced version for waste transport Reinforced roof tarpaulin, Panama 900 g Cleaning door in the front wall Rear crossbar can be tilted and unlocked from below! Ideal for bale transport RENTING is the new BUYING, and with us, it is immediately available even in FULL-SERVICE RENTAL.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Pedoyh S Aijpfx Akisrc Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2021, total length: 9,880 mm, total width: 2,550 mm, suspension: air, wheelbase: 7,110 mm, color: other, General information Year of construction: 2021 Registration number: OX-61-DR Axle configuration Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 5.600 kg Carrying capacity: 33.400 kg GVW: 39.000 kg Maintenance, history and condition Prsdpfx As Agkifjkiec APK (MOT): tested until 04/2027 Damages: damaged vehicle (not roadworthy)

Condition: used, axle configuration: 3 axles, first registration: 04/2011, loading space length: 9,000 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, total length: 11,500 mm, total width: 2,600 mm, total height: 3,700 mm, tire size: 425/65R22.5, tire condition: 60 %, color: red, Equipment: ABS, General Information Year of manufacture: 2011 Axle Configuration Tire size: 425/65R22.5 Rear axle 1: Tire tread: 60%; Reduction: single reduction Pedpfx Aezuw Ncekisrc Rear axle 2: Tire tread: 60%; Reduction: single reduction Rear axle 3: Tire tread: 70%; Reduction: single reduction Weights Unladen weight: 7,500 kg Payload: 37,500 kg GVW: 45,000 kg Functional Body manufacturer: OTHER Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: used, first registration: 09/2019, STAS 3 - Full Aluminum Axle - Grain Tipping Trailer SHAKER / VIBRATOR!!! • ABS • EBS • WABCO SmartBoard • ALCOA rims • 3 x air-suspended 9-ton JOST / SAF axles • Lifting/lowering system • Lift axle (1st axle) • GVWR: 39,000 kg • Tare weight: 5,710 kg • Payload: 33,290 kg Pedsz Ezu Iepfx Akijrc • Tire size: 385 / 65 R 22.5 • Tire tread: 80 - 90%! • Platform • Roller shutter • Work lights • Pneumatic rear door release • Automatic / pneumatic venting during tipping • Overall trailer length: 10,227 mm • Volume: 55 cubic meters - 1st owner - German trailer - TÜV (technical inspection): new! Errors and prior sale excepted! = Further information = Year of manufacture: 2019 Tare weight: 5,710 kg

Condition: new, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new 3-axle Knapen SANH sliding floor trailer * BPW 9-tonne ECO Air HD rigid axle with disc brakes 430, 10-bolt, offset 120 * TireCheck tire pressure monitoring system * Smart Board * 1st axle: lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF tires * Gearbox-supported winch with thrust compensation * Swinging mud flaps * Plastic tool box 1000x500x500mm * 28 L water tank with soap dispenser Prsdpfjz Ab Thjx Akijc * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder, CARGOFLOOR CF-500 SL-C system, electronic operation * Diamond-patterned aluminum floorboards, 10 mm, 21 boards * Wear plates at the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear under the floor * Platform on the front wall with ladder * Moving bulkhead * Rear doors with external locking bars, one locking bar per rear door * Foldable "A" sign on the left rear door * Tarpaulin with side straps and tensioning ratchets under the trailer * Fixed side on the right, overhang on the left approx. 400 mm * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the keder on the left side wall, including fixed roll-up mechanism at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Body RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY * Also available as a rental vehicle Inquire about our attractive financing options.