Used Spray Glazer for sale (1,980)

Condition: good (used), NNP Mobile heated jet spray glazer Stainless steel spray glazer, twin jets mounted on frame, heated 100L tank, adjustable temp control, mobile, 3Ph Lrsdpfxezzf D Ue Abyeu

Condition: like new (used), Wrightfield Spray glazer Stainless frame, stainless mesh belt, belt width 850mm, variable speed, recirculation pump, mobile, 3Ph Lrodpfxein Uvfe Abyeu

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. Lrodpfjxhfc Rox Abysu The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle Lredpfx Ajz D Efnsbyeu

Condition: used, functionality: fully functional, Alfa Laval TJ20G Rotary Jet Head 316L Stainless Steel 1½" Jet head's were removed from process in 2023 and kept as spares. In good condition. We have up to 8 of these available. Contact us for more information Ledozlqnyjpfx Abyjru

Year of construction: 2022, condition: like new (used), The Raytec Spray is a high-resolution belt-type optical sorting machine designed for inspecting and sorting whole or cut agri-food products like fruits, vegetables, and salad leaves. Lredpfx Absz E Smzsyou Optical Resolution: 0.5 × 0.5 mm Light & Vision Technology: Pulsed LED lighting source with ultra-high-resolution CCD cameras viewing from above (supports up to 8 simultaneous digital signals/Octa-Chromatic analysis) Air Rejection System: 176 electrically controlled ejection nozzles with a 6 mm nozzle pitch

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Lredpfsz Itlwex Abysu Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Condition: used, Year of construction: 2018, This system consists of anautomatic spraying machine with part detectionand, in addition, a glass detection system. Roller conveyor is installed in front of and behind the machine. Technical data: Item 1 Roller conveyor - Manufacturer: Venjakob - VEN Trans - Year of manufacture: 2018 - Length: 1,200 mm - Width 1,438 mm - Working width 1,300 mm - Working height 940 mm ± 20 mm - Roller diameter 80 mm - All rollers with hose cover - Roller pitch 150 mm - Motor power 0.75 kW - Feed speed 0.7 – 3 m/min via frequency inverter Item 2 Automatic spray painting machine - Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2018 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Control panel on the right - Suitable for solvent-based and water-based paints - Price for reconditioned machine - As-is condition, machine not overhauled - Spray gun drive in Duo configuration - Dry extraction - Extraction nozzle diameter 400 mm - Exhaust air flow rate 7,000 m³/h - Feed speed continuously variable ~ 1.5 – 4 m/min. - Light curtain, part detection type LS 25 and glass detection system - Touchscreen control - Paper belt transport system - 1 paint circuit installed - 1 pump stand - Air atomisation system - Number of paint pumps: 1 - Length: 3,630 mm - Width: 3,575 + 990 mm - Total power consumption: 13 kW - Paint finish: RAL 7035 light grey and 9005 black - Location: not in stock - Voltage fluctuations: max. +/- 5 % Item 3 Roller conveyor - Manufacturer: Venjakob - VEN Trans Ljdpfx Aj Aba U Eobyoru - Year of manufacture: 2018 - Length: 1,200 mm - Width: 1,438 mm - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Roller diameter: 80 mm - All rollers fitted with hose covers - Roller pitch: 150 mm - Motor power: 0.75 kW - Feed speed 0.7 – 3 m/min via frequency converter

Condition: used, Year of construction: 2018, operating hours: 2,040 h, Makor Spraying Robot RoboSTAR M – 2018 Makor RoboSTAR M spraying robot, manufactured in 2018 and in good working condition. The machine has low operating hours and has been well maintained, making it an excellent option for automated spraying applications. Ideal for businesses looking to improve efficiency, consistency, and production capacity. Ledpfx Abozw Hzaoyeru

Condition: used, Year of construction: 2023, functionality: fully functional, 6-axis CNC spraying robot for automatic surface treatment of windows, doors, and other suspended items. Features tracking, automatic color change, and intelligent control of paint and spray pattern. Manufacturer: CML Model: Ghost X Master Year: 2023 Condition: Used machine Max. workpiece dimensions: 3500x2640x150 mm Automatic color change: 5 colors + wash 2 spray guns: Air-mix Graco G40 Tracking: painting on moving workpieces Power: 18 kW Air pressure: 6 bar Workpiece loading/unloading: manual Paint pumps: 5 pcs Wash pump: 1 pc. Lrsdpfx Ae Aazwxebyeu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is a complete, fully functional automatic painting line, based on the Superfici Compact Spray 1300 automatic spraying system, along with a CEFLA drying system. The line is complete, currently assembled, and has been used in regular production. It is being sold as a complete technological line. The set includes: - Superfici Compact Spray 1300 painting machine - CEFLA drying tunnel – total length approx. 13 m - CEFLA control cabinet - CEFLA conveyor - GRACO Merkur X48 pump - GRACO D08B pump Condition: used, complete, and fully functional. The machine can be inspected on-site in Poland, in the Silesian Voivodeship (near Bielsko-Biała). Upon request, a video showing the line in operation and additional technical information are available. Available immediately. Lodpfoz Ix Azex Abyeru The terms for dismantling, loading, and transport can be agreed upon individually. Price: 49,900 EUR net.

Year of construction: 2021, condition: like new (used), machine/vehicle number: 100056463, This is a miniature Buchi B-290 spray dryer (Mini Spray), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, as well as industrial applications. It is a BUCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Lredpfx Asz E Sq Hjbysu Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance. 💥 End-of-year clearance sale 💥

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Lodpfe Adr Hxex Abysru Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing system and its installation situation before dismantling and to document it for a later reinstallation. Technical data and equipment: • Large-area filtered supply air ceiling approximately 8,100 × 4,500 mm • Filter ceiling divided into two sections across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system as it currently exists on-site Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Its previous use included high-quality surface work, up to and including high-gloss coatings. An inspection of the still assembled system is highly recommended. Lrodpfxoz Ikyrs Abyeu Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are to be carried out entirely by the buyer at his own cost and responsibility. The buyer must organize the necessary skilled personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical data has been compiled based on the available documentation, nameplates, and the current condition of the system. Information provided without guarantee. The condition and scope determined during inspection shall be decisive. Selling price: 25,000.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system Lodpfx Asxw Ux Hsbyjru High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Ledpjx Iggyofx Abyeru Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Lrsdpfx Abs Adrrzsyeu Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: used, functionality: unexamined, 3x KREMLIN Airmix paint spraying/material pumps – 1x Type 17A + 2x Type 20-15 – with accessories Description: For sale is a package consisting of three professional KREMLIN Airmix paint spraying/material pumps from a former paint shop. The units were used for professional painting applications and are mounted on mobile or stationary units with corresponding accessories. Scope of supply: 1x KREMLIN Airmix Type 17A - KREMLIN pneumatic Airmix pump - Type plate: 17A - Translation according to type plate: 10:1 - Serial No.: 72989 - with material container - Pressure regulator - Pressure gauge - Hose set - mobile base 2x KREMLIN Airmix Type 20-15 - Type: 20-15 - one unit with visible serial no. 06E 1581 - each with pressure regulators and pressure gauges - Material container - Material and air hoses - Accessories as shown in the pictures - mounted on mobile units/cabinets The units have not been in operation for a longer period. A current functional test has not been carried out. Due to the prolonged period of inactivity, an inspection, cleaning, and possibly an overhaul of the pumps, seals, and valves should be performed before recommissioning. The units are therefore explicitly offered in their current condition and without testing. Technical documentation is still available for the KREMLIN 20-15; specific spare parts and repair parts such as repair kits and coupling parts are also still offered. Therefore, in addition to recommissioning, the pumps can also be used as a source of spare parts or as a spare parts package for existing KREMLIN Airmix systems. Location: 3608 Thun, Switzerland Availability: immediate Inspection: possible by appointment Sale: preferably as a complete package Lrsdpfxjz Iuiqo Abyju The sale is ex works, in the current condition, without warranty or guarantee. Subject to prior sale. Selling price: 1,450.00 EUR Price net, any applicable statutory taxes and duties are not included. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 3285401, type of input current: three-phase, SCM Superfici Mini Plus P spray booth, automatic spraying machine, year of manufacture 2023. Lrjdpfx Aoz Nggxebyju

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Lodpfez S Egiex Abyjru Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 4 Wagner TWINCONTROL 2k paint application systems, color spraying systems 2 x low-pressure systems, used only once for testing purposes 2 x Airmix systems, little used, in new condition Lredpszk A H Esfx Abysu Each system consists of 3 piston pumps: 1 x for the base component 1 x for the hardener component 1 x for flushing with accessories On request, also available with stainless steel storage tanks with agitator, 2 x new, 2 x demonstration units Can also be purchased separately Ideal for series production and automation EX version, as it operates only with compressed air Purchase or lease takeover possible See also document in the appendix (designations) Price description: Two systems always belong together. One system for priming, one system for painting. 1. Twin Control low-pressure (AirCode), either sales price 59,000 euros or lease takeover 1,530 euros/month + 17,000 euros takeover 2. Twin Control high-pressure (Airmix), either sales price 62,000 euros or lease takeover 1,535 euros/month + 19,000 euros takeover Lease takeover subject to: Agreement from the leasing company 3. Stainless steel storage tanks (2 new) with agitator, sales price 3,200 euros 4. Stainless steel storage tanks (2 used) with agitator, sales price 2,400 euros If the complete package is taken over, the price is negotiable.

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 012729, overall weight: 920 kg, tooth pitch: 45 mm, total height: 1,680 mm, coolant pump power: 210 W, grinding wheel diameter: 250 mm, input voltage: 400 V, spindle speed (max.): 2,600 rpm, input frequency: 50 Hz, ISELI SBW Automatic Bandsaw Blade Sharpening Machine – Used For Sale – ISELI SBW Automatic Bandsaw Blade Sharpener Used ISELI SBW automatic sharpening machine for bandsaw blades, suitable for sawmill and industrial applications. The machine was used in our sawmill exclusively for sharpening our own bandsaw blades and was fully operational and in regular use right up until the day it was disconnected. The machine is fitted with 3 interchangeable cams for different tooth shapes. Please note: The tooth pitch adjustment is no longer operational. The machine is currently set to a fixed 45 mm tooth pitch, which was the pitch used in our sawmill. Technical Specifications Manufacturer: ISELI & Co. AG, Switzerland Model: SBW – Wet Grinding Grinding motor: 0.75 kW Driving motor: 0.30 kW Height adjustment motor: 0.37 kW Feed motor: 0.11 kW Cooling water pump: 0.21 kW Spray suction: 0.75 kW Tooth height: 6–25 mm Tooth pitch: Fixed at 45 mm (adjustment not operational) Rake angle: 5°–35° Blade width: 60–350 mm Blade length: 6,200–9,500 mm or 8,500–12,000 mm Sharpening speed: 20–40 teeth per minute (variable) Grinding wheel diameter: 200 or 250 mm (Borazon/CBN) Grinding wheel bore: 25 mm Grinding wheel widths: 6 / 10 / 12 / 13 mm Grinding spindle speed: 2,600 RPM Machine height: 1,680 mm Net weight: 875 kg without blade support / 920 kg with blade support Approximate export packing volume: 4.5 m³ Condition Lrsdpj Abaldsfx Abyeu Used machine in working condition. Previously operated in a working sawmill for our own blade maintenance, rather than commercial sharpening. The machine has not been tested since disconnection. Important: Sold as a used machine with a fixed 45 mm tooth pitch. Three tooth-profile cams are installed. Available for inspection by arrangement. Please contact us for further information or additional photographs.

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) Ljdoz Ry Ncspfx Abyoru discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: ready for operation (used), machine/vehicle number: 89915, Drive system = compressed air, Material/air ratio = 16:1, Maximum material pressure = 90 bar, Air inlet pressure = 1 to 6 bar, 4 double strokes per 1 liter of material, with MX type spray gun with double hose, unused since the last maintenance in 01/20, Ljdpfsiv Huwex Abyoru Condition as inspected, Ex works, from warehouse Seevetal, subject to prior sale.

Condition: good (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,400 kg, 2 Fanuc spray robots with spray guns, used for painting and lacquering MDF board edges, are being sold as a set. Lsdpfx Aezb Dgpebysru