Used Single Door for sale (16,503)

Condition: good (used), Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 Hedjd Sm U Djpfx Ac Tet -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch Hodpeztl Scefx Ac Tjt - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Hjdpfx Acoy Su D Ue Tjt

Condition: used, machine/vehicle number: 007901, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 2: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Hsdszwmbaopfx Ac Tot Position 3: Batch 1 edge banding machine for doors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 5: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 6: Single Edgebanders FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 7: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heaters were acquired as part of a machinery takeover from VW/Dieffenbacher and are no longer needed. They are assumed to have very few operating hours (previous use in a laboratory). Hedpjx An Eqofx Ac Tet Price per unit = €9,000, price for the entire package = €30,000.

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Currently, up to 5 units are available for sale. Hsdpfxjzhuuve Ac Tst The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven Complete with one mobile oven rack Hjdpfx Asyw T D Djc Tot In good working condition

Condition: new, Professional Heavy-Duty Stainless Steel Cabinet An extremely robust, deep-profile stainless steel cabinet of true industrial quality. This is a special model; a unit of this generous size and depth is rarely found on the market! Ideal for the food industry, commercial kitchens, butcher shops, laboratories, workshops, or discerning private users who prioritize hygiene, maximum storage space, and exceptional stability. Thanks to its high-quality stainless steel construction, the cabinet is completely resistant to water, steam, food acids, and both organic and inorganic acids. Rare, special dimensions: 1800 x 1500 x 670 mm (height x width x depth) – Extra-deep design for maximum storage capacity; perfect for large boxes and containers! Enormous load capacity: An impressive 200 kg load-bearing capacity per shelf (heavy-duty design). Flexible storage: Includes 4 height-adjustable shelves, allowing you to customize shelf spacing to your specific needs. Well-planned layout (3-door design): Left & Right: Heavy-duty storage compartments featuring the adjustable shelves. Center: Wardrobe section with an integrated clothes rail and sturdy hooks for neatly hanging clothing or equipment. Hygienic base: Integrated, fully enclosed 150 mm U-shaped solid plinth. It completely seals the gap to the floor—eliminating dirt traps, sitting flush with the floor, and easy to clean (HACCP compliant). Doors: Smooth-action hinged doors with ergonomic, full-length handle strips. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! Hjdpfszwlnlsx Ac Tot International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Pamasol Single Stage Filler Type: 2079 Hjdoznw Aispfx Ac Tot Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, We have one dual temperature control unit from Single for sale. The original purchase price was approximately €5,100. Hedpfx Aozbx Rpec Tjt Medium: Water Reinforced pump Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface: 20 mA PT 100 sensor Flow measurement Alarm

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors) Hjdpfx Acsztpw Nj Tjt

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW Hodpfx Acjzuykvs Tet 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: new, Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 1,000 mm, Fire-resistant doors, each door is new, unused, and of high quality, opened for photography. 2 fire-resistant doors from Teckentrup Door Solutions (distributed by KAMO Kran und Toranlagen). Protective doors, steel doors, door manufacturer Teckentrup T30 FSA 62 (interior doors), single-leaf. DIN right, 1000 x 2000 mm, primed RAL 9002 gray-white, and 1 mm steel galvanized. The doors have never been installed. Surround frame (1 piece) for masonry 265 mm with GEZE sliding rails. Hedpfx Acehf I Ewj Tet 1 top - door closer, magnetic contact, and bolt contact for status monitoring. Lock with panic function, door handle set, 1 x additionally with integrated electric door opener. Fire-retardant. The door leaf is 62 mm thick. Unused and in new condition, for sale. An opportunity for optimal fire protection of interior spaces. Price negotiable. Our asking price is €1,150.00 net, ex works, plus packaging costs. All technical specifications are subject to typographical errors and errors. Sale only within the countries of the European Union.

Condition: used, Year of construction: 2007, functionality: fully functional, The tempering units from the company Single are for sale. All three units are water-cooled models with different specifications: Medium: Water 1. STL 1-9-B5/20-TK6, 9 kW heating capacity and 20 kW cooling capacity 2. STL1-12-30-TKN4, 12 kW heating capacity and 30 kW cooling capacity 3. STL1-12-30-TKN4 Hjdjziwlgopfx Ac Tst

Condition: excellent (used), Deburring machine KEIL-SINGLE Hodpfx Acjztwwdj Tet Brush deburring machine Deburring machine Keil Single2 Workpiece support adjustable vertically and horizontally Machine rests on rubber feet (very smooth running) Prism for guiding round tubes included as standard Dust extraction port included as standard Brush diameter standard 250 mm (optional 200 mm and 300 mm) Brush width standard 60 mm (optional 20, 40, 80 and 100 mm) Brush replacement can be done quickly, as only one screw needs to be loosened and secured. Technical data Dimensions: Length 520 mm, Width 570 mm, Height 460 mm, Weight 50 kg Brush diameter: 200-250-300 mm variable Brush width: 20-40-60-80-100 mm variable 2 speeds: 3000/1500 RPM, Power: 3.0/2.0 kW Voltage: 400 V/50 Hz Application area The deburring machine deburrs hollow profiles in 2 – 3 seconds, simultaneously on the inside and outside in a single operation. Equipment Motor with pole change: 1500/3000 RPM Motor protection switch for both speeds CE marking Maintenance The machine design requires no maintenance (brush deburring machine). Keep the machine clean. Check the tightness of all connections. Ensure the holes on the back of the machine for ventilation are kept clear. I also have about 5 spare brushes with me.

Condition: used, mileage: 35,995 km, power: 125 kW (169.95 HP), first registration: 01/2001, overall weight: 9,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 2000, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, all wheel drive, M.A.N 8.174 LAE 4x4 firefighting vehicle 8/6 First registration: 08.01.2000 Hjdpfx Ajycn Hijc Tjt Approx. 35,995 kilometers Wheelbase: 3,560 mm ABS Cruise control 6-speed manual gearbox All-wheel drive Transfer gearbox (crawler gear) Differential lock Fog lights Rear view camera Double cab (DOKA) with 4 doors 9 seats Single tires 335 / 80 R20 MPT Rockinger trailer hitch with 12/24 volt socket Body built by ZIEGLER, year 2000, as per DIN 14530 600 liter water tank Hose reel rear right Ziegler rear pump FP 8/8 ????Rear ladder missing???? ?? NEW MOT upon purchase ?? VAT margin scheme according to § 25a

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Hodeyrnciepfx Ac Tot Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Hsdpfx Acowt R Dms Tet

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, empty load weight: 50 kg, input frequency: 50 Hz, Tool tempering heating: 9 kW. Temperature: 150°C. Hjdpezab A Ejfx Ac Tet

Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Hjdpfjw U Txusx Ac Tot Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Hjdpfx Aey Su Efoc Tot

Condition: good (used), functionality: fully functional, power: 70 kW (95.17 HP), fuel type: diesel, color: white, empty load weight: 13,400 kg, Year of construction: 1999, operating hours: 7,540 h, Equipment: cabin, Cat CB-535B roller, year 1999 with 7,540 operating hours, weight 13,400 kg, immediately ready for use, transport and delivery possible, we also prepare customs/export documents, inspection by appointment also possible on weekends. Hodpfxoyuzpno Ac Tot

Year of construction: 2017, condition: good (used), Single Compact K-160-9-24 160° C medium Water 11 KW year 2017 Hodpforupr Dex Ac Tet price: 4.950 € contact: Mr. Rainer Eckerle

Condition: excellent (used), functionality: fully functional, empty load weight: 7,800 kg, Year of construction: 2007, operating hours: 4,170 h, Equipment: air conditioning, cabin, Hamm 3307 HT Vio single drum compactor, year 2007 with only 4,170 operating hours, in good condition, immediately ready for use, weight 7,800 kg. Transport and delivery possible. We also prepare customs/export documents. Viewing by appointment, also possible on weekends. Hedoykktzepfx Ac Tet

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: C113962, including infeed roller table EMMEGI FERMO VIS 3780 DV and outfeed roller table Saw blade diameter: 400 mm Saw blade movement: Pneumatic, ascending Miter angle range: 15° left to 15° right Max. cutting height: 140 mm Max. cutting width at 90°: 260 mm Saw blade arbor: 32 mm Motor power: 1.5 kW; 2800 rpm Hsdszxil Rspfx Ac Tst Material clamping: 2 pneumatic vertical clamps Required air pressure: 6-8 bar