Used Serrmac Next 22E for sale (1,141)

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Precision spindle with hardened Morse taper and machined base plate. Electronic speed control included. Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Dsdpjir Aihefx Aaxswb Spindle stroke: 90 mm. Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Condition: new, SERRMAC NEXT 25 PGM DRILL PRESS - DOUBLE SPEED THREE PHASE - NEW "CE" - ROTARY TABLE + VICE Drilling on steel: Ø 25 mm Tapping: M16 Column attachment: CM3 Column diameter: 98 mm Spindle stroke: 100 mm Dwjdpjuif Sysfx Aaxob Transmission: pulleys (PU) No. of speeds: 12 No. of revolutions: 164 - 2460 rpm Motor power: 0.75 kW Power supply: 380 V - 3 phases Weight: 185 kg

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: Dwedpfxsznz Ezj Aaxjb • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Column drilling machine Serrmac R45 E/TR, year of manufacture 2021, drilling up to 45 mm diameter and threading up to M26 mm, continuous drilling capacity in R 50 ø 45 mm, thread cutting capacity in R 50 M 26, spindle taper MK 4, spindle stroke 145 mm, quill diameter 72 mm, table surface TR - base plate 600 x 460 mm, column diameter 164 mm, total height 1,986 mm, total width 675 mm, total depth 1,100 mm, weight 610 kg, spindle speeds equipped with inverter, motor power 3 kW, coolant and chip tray. Dodpsyh Dhwofx Aaxjwb

Condition: used, functionality: fully functional, MASCHIATRICE A PATRONA usata, FAMUP (SERRMAC) MDR16.MASCHIATRICE A PATRONA, SERRMAC CON IMPIANTO REFRIGERANTE PIEDISTALLO E VASCA, USATO. Dwsdpfxozht Izo Aaxob

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, total length: 1,300 mm, total height: 2,000 mm, table width: 255 mm, input voltage: 400 V, total width: 1,350 mm, table length: 800 mm, drilling capacity: 40 mm, Equipment: documentation/manual, SERRMAC TCS 40 TC VR DA Drilling and Milling Machine Square column and prismatic guides. Dodjzkkm Hepfx Aaxswb Complete with: Automatic feed. Variable speed with delay. Tapping system via reversing gearbox. Lubrication system. Motorized rapid vertical feed for table and cross slide. Vice. Drilling in steel, diameter 40 mm. Tapping M26. CM 4 spindle connection. Spindle travel 145 mm. Cross slide table 800 x 255 mm. Variable speed with delay 64-2350 rpm. Motor 2.2 kW. Three-phase power supply 400 V. Weight 780 kg.

Condition: good (used), Code: 0462 Brand: SERRMAC Model: V 22 - CE Standard Pillar drill with swivel table for machine shops, workshops, carpentry shops, and other applications - CE Standard Technical data: Sturdy construction Drilling capacity in steel diameter 22 mm Spindle taper cm2 Spindle stroke 90 mm Column diameter 98 mm Distance from column to spindle center 201 mm Table 350 x 250 mm Dodpfx Aajzp Exzexjwb Spindle speed 255/380/420/560/630/660/950/990/1090/2380/2590/3850 rpm Motor power 0,55 Kw Overall dimensions mm 400 x 750 x 1700 h Weight kg 170

Condition: excellent (used), Number of spindles 4 Drilling capacity -25 mm Throat 205 mm Quill stroke 120 mm Spindle speeds 150-2'000 rpm Table size 1400 x 275 mm With tapping device MARCELS MASCHINEN CH Djdpfxey Iz Sdo Aaxewb

Condition: good (used), Year of construction: 2017, operating hours: 494 h, functionality: fully functional, machine/vehicle number: 27026757, type of input current: three-phase, total height: 510 mm, total width: 300 mm, total length: 706 mm, input voltage: 400 V, ground cable length: 5,000 mm, overall weight: 100 kg, type of cooling: water, hose package length: 1,200 mm, electrical fuse: 35 A, open-circuit voltage: 73 V, welding current at 60% duty cycle: 360 A, welding current at 100% duty cycle: 320 A, input current: 26 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: type plate available, Fronius TPS 400i Pulse MIG/MAG welding system – complete with accessories For sale: Fronius TPS 400i Pulse professional MIG/MAG welding system, complete with wire feeder, mobile stand, and a comprehensive set of accessories. The Fronius TPS 400i Pulse is a professional welding machine suitable for a wide range of MIG/MAG applications. The machine features pulse welding and the ability to record welding data (datalogging). This datalogging is a built-in function of the welding machine and is not a separate accessory. Included with the machine: - Fronius TPS 400i Pulse - Fronius wire feeder, without stand Djdjzwhpropfx Aaxswb - Sturdy mobile stand for the power source - 1.2-meter intermediate cable pack, currently connected - 20-meter intermediate cable pack, supplied as extra - 8-meter Push/Pull welding torch - Wera torque screwdriver, for correctly tightening the push/pull wire feed rollers - Box with various wear parts, including contact tips, gas nozzles, and other accessories - Ground cable with welding clamp - Connecting cables and other cables/hoses - Other accessories as shown in the photos - Manual available digitally Versatile professional system The combination of the 1.2-meter intermediate cable pack, the supplied 20-meter intermediate cable pack, and the 8-meter Push/Pull torch makes this system highly versatile for welding aluminum, among other applications, and for larger structures or workpieces where the welding machine cannot be placed directly next to the workpiece, the set offers a great deal of flexibility. The built-in welding data recording/datalogging is of interest to professional users who value process monitoring, quality control, and traceability of welding work. The machine has been used and has normal signs of wear, but is in good and solid condition. Sold as a complete set as shown. Inspection and testing are possible by arrangement. Pick-up only, shipping not possible. A forklift is available.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Dodpjwnr A Hefx Aaxjwb Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: used, This listing is for Genomix GCG-SR-1 10X Next Gen Single Cell Controllor The unit is in full working condition and ready for immediate use This advanced single cell controller provides precise fluidic control for high-throughput genomic sequencing and analysis workflows Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Dedpfx Aaozghrlexjwb

Condition: used, Year of construction: 1995, machine/vehicle number: 953003, Order No. 25072 Technical Specifications: - Drilling capacity in steel ST 60: 40 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 150 mm - Drill spindle speed: infinitely variable rpm - Throat depth: 350 mm - Max. distance between drill spindle and table: 580 mm - Table with 2 T-slots: 600 x 450 mm - Height adjustable via gear rack and hand crank - Table tiltable left and right - Drive: 400 V / 3 kW - Space required: approx. W 700 x H 1950 x D 950 mm - Weight: approx. 650 kg - With: - Machine vise - Keyless drill chuck: 1-13 mm - Lighting Dsdpfx Ajv Uy Npoaxswb

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 Dedpfx Asx Ahkaeaxowb NETTE TRAILER TIRES.

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Dwsdpfx Aajp Du Alexeb Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Condition: good (used), mileage: 916,442 km, power: 368 kW (500.34 HP), first registration: 03/2017, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,120 mm, total width: 2,550 mm, total height: 3,880 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Hydraulic system - Alloy wheels - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric - Auxiliary braking system Dwjdpfx Aszlx T Doaxjb = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8454 kg, Gross weight: 20500 kg, Total tank capacity: 1000 liters, Height of fifth wheel coupling: 119 cm, Fifth wheel coupling: Fixed, Winch pulling capacity: 388 tons, Alloy wheels, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Red, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 368 kW (493 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Retarder, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat configuration: 1+1, Seat covering: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 4 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 12 mm; Tire tread depth left outside: 12 mm; Tire tread depth right inside: 13 mm; Tire tread depth right outside: 10 mm; Suspension: Air suspension Weights Unladen weight: 8,454 kg Payload: 12,046 kg GVW: 20,500 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and model years in various price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • Good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 1997, operating hours: 12,905 h, load capacity: 8,000 kg, fuel type: diesel, empty load weight: 11,500 kg, Unladen weight: 11,500 kg, load capacity: 8,000 kg, overall height: 280 cm, maximum width: 200 cm, lifting height: 330 cm, fork length: 160 cm, mast (manufacturer: Auramo, type: DF 80, year of manufacture: 2000), hour meter reading: 12,905 hours, fork length: 160 cm, next safety inspection due by 11/2026. Dwedpfozzw Ewex Aaxob

Condition: used, Separation wall 2000 x 2200 with 3 levels of filtration, filtration area 2000 x 1000. Working area 1 meter deep with recessed lighting IP65, and a table for storage. Fan NEXT 211 1.1 kW ATEX explosion-proof, max 4500 m3/h mounted on top of the wall. Dwsdpevuqg Sjfx Aaxob Starter start/stop, and duct connection unit with shock absorber to the outside. Stand is good. Can be viewed in Vilnius. If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 2008, Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Technical data - Formats: 28 × 1.5 closures - Application: Capping of bottles (roll-on closures) Dsdpfx Asy I Nt Njaxowb - Configuration: Rotary turret with 12 capping heads - Neck finish: 28 × 1.5

Condition: excellent (used), operating hours: 8,064 h, Brand : LAGUN Model : GBM-22E Type : CNC 5 EJES Cnc :HEINDENHAIN 530 Table dimensions : 2.200 x 1000 mm Number and width of T slot: 7 x 22 mm Distance between T slots: 140 mm Axis travels (X,Y,Z) : 2.000 x 1.200 x 1.000 mm Head type : Automático Spindle speed : 4.000 rpm Taper : ISO 50 DIN 2080 Main motor : 28 kw Continuusly variable speeds : 50➗ 4.000 Speed range : 2 Rapid traverse : 10.000 mm/min Machine weight : 15 tn Electronic hand-wheel : Yes Working hours : Dodoyg R Abjpfx Aaxjwb Machine running: 22.924 h Control on : 23.132 h Automatic cycle: 8.064 h

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,000 rpm, total length: 1,000 mm, total width: 800 mm, spindle mount: MK 2, type of input current: three-phase, The three-phase 380-volt motor is running smoothly. Geared headstock, with gears running in oil. Six spindle speeds are adjustable from 120 to 2000 RPM. Head height and angle are adjustable. MT2 spindle taper. Power table feed with three adjustable feed rates: 33-65-170 mm/min. Maximum distance between table and spindle: 375 mm. Cross table dimensions: 630x150 mm. Adjustable LED machine light. Emergency stop switches. Dwjdpfx Aozycprjaxob Overall in good condition. Made in Austria. Dimensions: 80x100x185 cm. Includes all accessories as shown in the pictures, located on the floor next to the machine. Contact us for shipping options! €2,650.00

Condition: good (used), mileage: 821,147 km, power: 331 kW (450.03 HP), first registration: 04/2019, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,560 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Highline - Alloy wheels - Manual - Radio/cassette - Lane keeping assist - Fabric - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 7221 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 400 liters, Height of fifth wheel coupling: 118 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 356 tons, Alloy wheels, Suspension type: Air suspension, Type of cab: Highline, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Bluetooth, Engine power: 331 kW (444 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: SCA, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Axle 2: Dual tires; Tire tread depth left inner: 13 mm; Tire tread depth left outer: 13 mm; Tire tread depth right inner: 13 mm; Tire tread depth right outer: 12 mm; Suspension: Air suspension Weights Unladen weight: 7,221 kg Payload: 11,779 kg GVW: 19,000 kg Maintenance APK (Periodic Vehicle Inspection): Valid until 03/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing inventory of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory Dedpfezuk Avjx Aaxjwb • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 05/22, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 45 mm, workpiece height (max.): 1,200 mm, number of slots in tool magazine: 12, actuation type: electric, Equipment: CE marking, documentation/manual, CNC MACHINING CENTER TOP PROXIMA – 6 SIDES, AUTOMATIC LOADING, DOWEL INSERTION, AND RETURN For sale: CNC machining center TOP PROXIMA, year 2022, designed for the automatic machining of furniture components and panels. Machine in very good condition, well-maintained, and currently installed in a production facility. It allows for drilling, milling, and automatic dowel/hardware insertion operations, with the possibility of machining the part on up to 6 sides. It features two independent work units, one for the main side and one for the back side, reducing handling and intermediate operations. Automatic loading and buffer stock. The machine incorporates an automatic loader that acts as a production buffer. Parts can be identified using a barcode reader/scanner, associating each part with its machining program. It can also be integrated into an automatic line, receiving parts directly from previous processes. Before machining, it incorporates an automatic system for checking and measuring part height. Main functions: Vertical and horizontal drilling. CNC milling. Machining of up to 6 sides. Front machining unit. Rear machining unit. Automatic tool change. Automatic dowel insertion. Dowel insertion on the X-axis. Automatic dowel feeding. The machine has various spindles, electro-spindles, and specific units for drilling, milling, and dowel insertion. Direct output or automatic return Once machined, the part can continue with direct output to the next process or automatically return to the beginning using the conveying system. Dodjztkqdopfx Aaxowb The return system also incorporates a loader/accumulator, allowing for the storage of machined parts and functioning as an output buffer. The machine can operate independently or be integrated into an automated manufacturing line. Main data: Manufacturer: TOP Model: PROXIMA Year: 2022 Maximum part length: approx. 3,000 mm Processes: drilling, milling, and dowel insertion Machining: up to 6 sides Loading: automatic with storage/buffer Identification: barcode Part control: automatic height measurement Output: direct or automatic return Control: industrial CNC Safety: enclosed installation Condition: Machine in very good overall condition, well-maintained. Operating hours are not available on the control panel. Availability: Availability to be confirmed. The machine is currently installed, and its removal will depend on the implementation of the new production line. Disassembly and loading: Disassembly, loading, and transport are not included. These tasks must be carried out by an external, specialized company at the buyer's expense.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Dwjdpfozzlqnox Aaxob Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: good (used), Year of construction: 2013, operating hours: 15,185 h, load capacity: 3,000 kg, fuel type: gas, Unladen weight: 4,565 kg, load capacity: 3,000 kg, power: 39 kW, overall height: 230 cm, overall width: 120 cm, max. lifting height: 310 cm, fork carriage hydraulically adjustable and extendable, max. fork length: 185 cm, min. fork length: 110 cm, pneumatically adjustable seat, cabin heater (Linde), next inspection due 11/2026, operating hours recorded: 15,185.2 h. Djdszzw Hzopfx Aaxswb

Condition: new, Year of construction: 2026, Genie GS3232 NEXT GENERATION E-Drive scissor lift with hydraulic outriggers, new, used - demo machines available Dwjdpfx Ajrqfn Usaxjb