Used Selco / Systraplan Wntr 710 for sale (996)

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Selco / Systraplan Type: WNTR 710 Year of manufacture: 2011 with SYSTRAPLAN supporting table Dkodpfx Aozuyxysa Iju Technical data Cutting length: 4300 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, - max. panel width 4500 mm - max. panel length 2200 mm - max. saw blade projection 127 mm - main saw 18.5 kW Dkedpfx Aozuyxmsa Iju - scoring saw 2.0 kW - with lifting table used panel dividing saw Manufacturer: Selco Type: WNTR 730 Year of manufacture 2011 Technical data: Max. panel width 4500 mm Max. panel length 2200 mm Max. saw blade projection 127 mm with lifting table 9 grippers on the sliding fence Flexible grippers for positioning via NC Max. feed rate 130 m/min 1 saw unit with positioning via NC max. tool diameter 470 mm Motor power 18.5 kW Scoring unit max. blade diameter 200 mm Motor power 2 kW Quick-change device QUICK CHANGE SYSTEM Max. feed rate 185 m/min Machine programming software OSI Barcode label printer Barcode scanner Total installed power 44 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2002, cutting length (max.): 4,500 mm, This 4-axis BIESSE Selco WNTR 600 was manufactured in 2002. It features a maximum blade projection of 120 mm to 132 mm and cutting lengths of 3,200 mm, 3,800 mm, and 4,500 mm. The machine is equipped with a powerful main saw motor ranging from 13.5 kW to 18 kW and a saw carriage speed of up to 150 m/min. If you are looking to get high-quality panel cutting capabilities, consider the BIESSE Selco WNTR 600 machine we have for sale. Contact us for further details. • Max. blade projection: 120–132 mm • Cutting lengths: 3,200 / 3,800 / 4,500 mm • Main saw motor: 13.5–18 kW • Main saw blade diameter: 430 mm • Scoring saw blade diameter: 200 mm Dkjdpfx Aasz Dhmuj Iou • Saw carriage speed: up to 150 m/min (brushless drives) • Pusher speed: up to 90 m/min • Pusher grippers: independent pneumatic grippers • Control system: OSI (Open Selco Interface) / OSI Plus numerical control • Machine layout: angular panel sizing system with two orthogonal cutting lines for automatic rip and cross-cutting

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Dkjdpfexranpox Aa Iou Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 160545, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, workpiece weight (max.): 2,000 kg, spindle motor power: 28 W, overall weight: 6,900 kg, spindle diameter: 115 mm, distance between centers: 3,000 mm, Machine had been very little used and it is standing completely out of production for sme years. It is equipped with SAUTER 05.320.020, Dksdez D Tbqjpfx Aa Iju 3-jaw chuck (dia. 315 mm), etc.

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from Dodpsuc Idxjfx Aa Ijku 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: excellent (used), Year of construction: 2019, Fan Systems WITT A-RNZ9/560/710/2 Centrifugal fan 2019, unused, mounted on frame with 45KW motor, see plates for full spec Dksdpfxjz E Nqqj Aa Isu

Condition: ready for operation (used), On offer here is a bellied welding machine from Seleco type Genesis. The device is in good condition and was still in use 2 weeks ago. The device is being sold without the hose package, which was stolen from me a few days ago. The device can be tested on site if the buyer brings a suitable hose package. 1x SELCO Genesis 260GSM 1x SELCO type WU 14 1x transport trolley !!!Without hose package, as shown!!! Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Dkedpfx Aoy Tpzdsa Ieu Remote control SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg

Condition: used, Year of construction: 2014, The machine will be in operation at the customer’s site until approximately mid-November and can be demonstrated under power until that time. Djdpez Hazvjfx Aa Isku Pricing: plus statutory VAT, EXW, unloaded (only the machine itself). Used edge banding machine Format 4 Perfect 710E Year of manufacture: 2014 Including: - e-Motion control system - Trimming unit with touch-controlled edge trimming cutters, 1.1 kW, max. chip removal 3 mm - Release agent spraying system - Pneumatically controlled, Teflon-coated gluing unit for 1.5 kg EVA, also suitable for PIR adhesives - Infrared heating lamp for preheating - Miter saw unit e-motion with 2 motors, 0.75 kW, pneumatically controlled - Combination milling unit, flush and radius milling unit with positioning control, including pneumatic retraction function - Multiple roller system for processing workpieces with dowel hole drilling - Radius scraping blade for processing 2 and 3 mm plastic edges, pneumatically adjustable - Flat scraping blade, pneumatically controlled - Corner processing unit with motorized adjustment for post-forming and soft-forming profiles, application-controlled shaping milling unit for processing front edges, edge thicknesses from 0.4-3 mm, workpiece height 10-60 mm, min. workpiece length 270 mm (Note: processing of wood edges is only partially possible) - Polishing unit - Lubricant spraying system for the combination milling unit - Spraying system for cleaning agents

Condition: used, functionality: fully functional, The Selco NEOMIG 242 is a classic, extremely robust MIG/MAG welding machine from the Italian premium manufacturer Selco (which was acquired by voestalpine Böhler Welding several years ago). Unlike modern, fully digital inverter machines, this is a stepped, electromechanical transformer system. This means that it is considerably heavier and larger than a modern compact inverter, but it is considered practically indestructible in metalworking shops and workshops, with an enormous service life and a very stable arc. Technical data at a glance Feature Value / Specification Dksdpfxjzd S Rys Aa Iju Welding process MIG/MAG (gas-shielded welding) Connection voltage 400 V (3-phase / three-phase) Welding current range 30 – 240 A Duty cycle 30% at 240 A60% at 170 A100% at 131 A Voltage levels Multi-stage, manually adjustable Wire feed Integrated, mechanical roller feed Max. power consumption approx. 8.3 kW Cooling Typically gas-cooled (standard hose package) Important features & practical advantages Classic transformer technology: Since no sensitive electronics are installed in the power unit, the NEOMIG 242 tolerates dust, metal grinding dirt and moisture much better than modern inverters. It also operates absolutely reliably under harsh conditions in the workshop or on-site. Excellent welding properties: Selco was known in the industry for its perfectly matched copper transformers and chokes. The system provides a very spatter-free, smooth and even arc in steel, stainless steel and also in thinner aluminum applications. Intuitive operation without unnecessary features: No complicated digital menus. You select the appropriate welding level, adjust the wire speed on the potentiometer and can start immediately. Using toggle switches, modes such as 2-cycle / 4-cycle (for long seams) as well as spot and interval welding can also be activated. Used market assessment: Since this series is no longer produced new, it is a real insider tip on the used market for workshops and ambitious DIY enthusiasts. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: used, machine/vehicle number: 008757, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 95 mm Dodjz Eyxxopfx Aa Isku No of Grippers: 9 Second flexible pusher: yes

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, cutting width (max.): 4,500 mm, feed rate X-axis: 140 m/min, section length (max.): 2,200 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum saw unit tool diameter: 380 mm Maximum scorer tool diameter: 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of cross cut saw grippers: 8+4 Dodoyxn Adjpfx Aa Isku Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Scorer unit 1 connected load: 2.2 kW Scorer unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, safety, and operation of the machine at the place of destination. External reference: 5711

Condition: used, Year of construction: 2008, Suitable for unmanned grinding or re-serration and chamfering of HSS and segment sawblades as well as solid carbide saws with ceramic saws and for deep grinding with CBN or diamond grinding wheels. Accessories: Total enclosure including 400 L coolant system with tank and fine filter, Device for automatic chamfering of regularly spaced saw blades, Device for automatic grinding of chip breaker grooves, Program for standard curved and pointed teeth, Special program for grinding saws with variable tooth pitch, CAD program for creating 250 custom tooth shapes, Automatic saw blade diameter adjustment, Automatic fire extinguishing system including explosion vent and pressure switch, Laser measuring system for automatic measurement of saw blade diameter, Automatic central lubrication, Dkodpfsz Nxh Iex Aa Iju Oil drip tray, 2 saw blade holders, 2 centering rings, Machine light, Electrostatic mist extractor LTA.

Condition: excellent (used), Year of construction: 2011, operating hours: 31,648 h, functionality: fully functional, machine/vehicle number: 90265 2011, saw blade diameter: 710 mm, tooth pitch: 55 mm, grinding wheel diameter: 200 mm, total width: 2,662 mm, total length: 2,540 mm, total height: 2,640 mm, type of input current: AC, input current: 10 A, input frequency: 50 Hz, disc diameter: 200 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 3,000 W, saw blade width: 8 mm, input voltage: 400 V, overall weight: 3,200 kg, saw blade bore: 80 mm, power: 10 kW (13.60 HP), grinding diameter: 710 mm, workpiece diameter (max.): 710 mm, Equipment: rotational speed infinitely variable, CNC saw blade sharpening machine with lateral tooth divider grinding device and saw blade magazine for blades up to D=560 mm for unmanned operation. In manual mode: 40–710 mm. Saw blade magazine with 3 holding arbors. Oil filtration system for HSS, oil cooler brand Polar 2.9. Tooth geometries HSS: Form A, B, BW, C and special tooth forms. Saw blade holders for manual loading D=75 to 250 mm and D=40 to 100 mm. Special program for grinding variable tooth pitches. CAD program for creating up to 250 custom tooth shapes. Fire extinguishing system is an oil retrofit kit with aerosol extinguishing generator. With electrostatic air extraction. Dksdsx Tct Topfx Aa Iju

Condition: used, machine/vehicle number: 008637, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 95 mm No of Grippers: 10 Dodpfxozg Uzts Aa Ioku

Condition: used, Year of construction: 2018, machine/vehicle number: 1000023651T, functionality: fully functional, power: 50 kW (67.98 HP), input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 3,200 mm, Equipment: documentation/manual, Selco WNAR 6 miter saw center. Dkjdjzl T Hlepfx Aa Isu

Condition: good (used), Year of construction: 1998, Mikron UM 710/900 Universal Milling Machine Dksdpozcqcgofx Aa Iou High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and generous work area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Work area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Work table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150 liter capacity Machine weight: approx. 4,300 kg (incl. safety cabin) Product video “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Dodpfx Aozug E Hea Ioku Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: good (used), Year of construction: 2001, I sell the panel beam saw BIESSE SELCO EB70. Year 2001. Dkodpfez Ii Arox Aa Iou Cutting size 3200x3100mm. Cutting height 55mm. Main motor 7,5kW Scoring motor 2,2kW Total area covered W.5422mm x D.6488mm Gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Very good condition. Available immediately.

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm Dkjdpfszuyl Tex Aa Ieu - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, machine/vehicle number: 007671, Max. panel width: 3800 mm Dkodpjwuufdjfx Aa Ieu Max. panel length: 3800 mm No of Grippers: 7

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Dkjdpfxsxt Sgts Aa Isu

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 152 mm Dkjdpfjvrrldjx Aa Ieu No of Grippers: 7 Thin sheet loading: yes

Condition: used, Year of construction: 2008, power: 36 kW (48.95 HP), cutting height (max.): 105 mm, cutting width (max.): 4,400 mm, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 4,400 mm Max. panel length: 2,200 mm Max. cutting height: 105 mm Dksdpfx Aajzmtnxe Iju Thin panel feed: Yes Post-forming process: Yes Gripper system Number of grippers: 10 Flexible, NC-positionable grippers: Yes Grippers on the sliding stop: Yes Sawing unit Main saw blade overhang: 120 mm Max. saw blade overhang: 120 mm Max. tool diameter, main saw: 450 mm Scoring unit: Yes Post-forming scoring unit: Yes Max. tool diameter, scoring saw: 300 mm Max. feed rate: 130 m/min MACHINE DETAILS Control system: Windows Machine programming software: OSI Total connected load: 36 kW EQUIPMENT CE marking Tilting table with 4 tables Saw carriage 1 Barcode label printer Zebra S4M The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8409

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Dkjdpfxsy Nk Dfs Aa Iju Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes