Used Scm T120C 8/24 for sale (43,306)

Condition: used, SCM T120C 8/24 Spindle Moulder Djdpfozilpgox Aa Hjkt

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015315, functionality: fully functional, planing width: 240 mm, number of spindles: 8, working height: 140 mm, TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 140 mm Infeed table length: 2,500 mm Feed drive: Cardan drive Lubrication system: Automatic Diameter of planing shaft: 40 mm Spindles Number of spindles: 8 pcs. Spindle 1 Spindle type: Bottom Tool available: Yes Spindle 2 Spindle type: Right Tool available: Yes Spindle 3 Spindle type: Left Motor power: 15 kW Tool available: Yes Spindle 4 Spindle type: Right Motor power: 11 kW Tool available: Yes Spindle 5 Spindle type: Left Motor power: 11 kW Tool available: Yes Spindle 6 Dkodpfxjzxcfdo Aa Hot Spindle type: Top Motor power: 15 kW Tool available: Yes Spindle 7 Spindle type: Top Motor power: 11 kW Tool available: Yes Spindle 8 Spindle type: Bottom Motor power: 11 kW Tool available: Yes Feed system Manufacturer: H&M Max. infeed length: 250 mm Discharge system Manufacturer: H&M Max. discharge length: 760 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 20,000 x 2,400 x 2,200 mm Unladen weight: 6,000 kg Number of transport packages: 8 pcs. EQUIPMENT Tools for all 8 spindles Automatic lubrication system Electrical wiring diagrams Technical data Documentation CE marking

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Control program: Xilog Plus X-axis between stops: 2500 mm Dkjdpfx Aaozhgz Is Hot Y-axis with milling: 1240 mm Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° Djdpfjzcpixox Aa Hokt - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: ready for operation (used), Year of construction: 2003, number of axes: 3, This 3-axis SCM PRATIX 48 NST was manufactured in 2003. It features a working area of approximately 1220 x 2440 mm and is equipped with a vacuum nesting table. The machine includes an HSK electrospindle with a power range of 7.5–9 kW and a tool changer, either linear or side-mounted. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM PRATIX 48 NST machine we have for sale. Contact us for further details. • Working area: approx. 4' × 8' (1220 × 2440 mm) Dkodpfx Aajzug Etj Hst • Table: Vacuum nesting table • Spindle: HSK electrospindle, 7.5–9 kW • Tool changer: Linear or side-mounted ATC • Drilling block: Vertical drills (standard) • Controller: SCM Xilog

Condition: used, Technical specifications: Max. planing width: 190 mm Max. planing height: 120 mm Spindle diameter: 35 mm Number of spindles: 4 Spindle arrangement: bottom: 5.5 kW Dkjdpfxezguwne Aa Hot right + left: 5.5 kW top: 5.5 kW Gear-driven feed rollers: 3 Dust extraction port diameter: 150 mm Feed system with universal joints Lubrication pump for the work table Pressure: 6 atm Electric lifting of the machine body Power supply: 400 V Overall dimensions: Length: 3300 mm Width: 1230 mm Height: 1730 mm

Condition: good (used), Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Dkedpfx Aoy A Svpsa Hjt Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: AH/115881, functionality: fully functional, overall weight: 2,364 kg, Equipment: documentation/manual, Element thickness: 60 mm Edge thickness: 8 mm Feed speed: 18 m/min Soundproof cabin: Yes Glue tank: Yes Touchscreen control (10 inches) Height adjusted manually from the control panel 4-axis milling machine, manually operated from the panel Dkedpfeytkczsx Aa Hst Cross cutting Two wrapping units, profile scraper

Condition: excellent (used), Year of construction: 2008, CNC machining center Dkjdpfxezx R Rzj Aa Het Record 240 NT Year of manufacture: 2008

Condition: used, Technical specifications: Max. planing width: 520 mm Cutterhead diameter: 120 mm Dksdpfjzia E Nex Aa Hjt Number of knives: 4 Total length of tables: 2965 mm Electric table height adjustment Tilting feed table Safety switch Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 2965 mm Width: 1400 mm Height: 1150 mm

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Dodpfozavvgox Aa Hskt Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, Used Tornos MultiSigma 8/24 Year 2010 40,000 operating hours Chip conveyor Robobar MSF-522-8 bar feeder, year 2010 Chip conveyor High-pressure pump Kraft and Bauer fire suppression system Dksdszpxk Rjpfx Aa Hjt Machine in very good condition with dual pick-up Set of collets Set of bar feeder channels

Condition: used, Technical specifications: Max. planing width: 520 mm Cutterhead diameter: 120 mm Number of knives: 4 Total length of tables: 2965 mm Electric table height adjustment Djdpfezvmw Sex Aa Hekt Tilting feed table Safety switch Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 2965 mm Width: 1400 mm Height: 1150 mm

Condition: excellent (used), CNC Flexible through-feed DRILLING, ROUTERING AND DOWEL INSERTING LINE Djdpfezza Nlex Aa Hekt Min/Max workpieces (panels) width (X axis) with Author 924: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 924: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 924: mm 100 /1600 (o 800+800) 200027A) Loader (Bridge Frame) "MAHROS" double station, Mod. Runner (max mm 1300) 200027B) Connection transfer unit "MAHROS" (90°) 200027C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 924 - N.4 Vertical electro-spindles (on the Y-axis) (Kw 6,6 ca.) - N.4 upper drilling units, each consisting of: - 1 vertical 36-spindle head - 8 (4+4) horizontal spindles on the Y-axis - 1 vertical 14-spindle heads (on the Y-axis) for fittings - N.2 horizontal units (1 R + 1 L) with N.1 21-spindle drilling head (2x21 = total 42) per unit - N.2 horizontal units (1 R + 1 L) with N. 6-nozzle injection head (2x6 = total 12) 200027D) Connection transfer unit "MAHROS" (90°) 200027E) Stacker (Bridge Frame) "MAHROS", double station, Mod. Runner (max mm 1300)

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: workshop-inspected Column extension: 750 mm Spindle stroke: 100 mm Max. clearance between table and spindle: 310 mm Spindle speed: 10,000/20,000 rpm Motor power: 2.2/3.3 kW Tool clamping: collet chuck With air blast device via compressed air connection External dimensions: 905 x 1380 x 1600 mm Dsdpfow I U Udsx Aa Hskt Weight: 533 kg Availability: by arrangement Location: Hochheim

Condition: used, Year of construction: 2008, machine/vehicle number: AH005185, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, actuation type: pneumatic, overall weight: 5,500 kg, Equipment: CE marking, We are selling a very well-maintained STEFANI SOLUTION 8000 edge banding machine. Year of manufacture: 2008 Machine length: 11,000 mm Edge band thickness: 0.5 - 16 mm Workpiece thickness: 10 - 60 mm Minimum workpiece width: 260 mm Maximum speed: 25 m/min (without using saws) Units: - Separating agent applicator - Pre-milling unit - Gluing unit - Saws - Trimming units - Buffing units - Brushes - Saw for creating grooves on the surface and along the edge. The machine is in operational condition. For additional information, please call. Dedszdlabopfx Aa Hokt

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Djdpfx Aaoxy Tmno Hjkt

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 Dkedpfx Aezwf Ekoa Hst documentation available, minimum/maximum planing dimensions width 25 to 230 minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: like new (used), Year of construction: 2012, functionality: fully functional, I sell the horizontal foil wrapping packing machine Producer: SCM GROUP, Italy Model: PACK 8080 Year: 2012 / like NEW, almost not used before Working circle diameter 1300mm. Working tables width 900mm. Feeding manual with tables total length 2,60m Assembled, ready for work. Dsdpor Alx Ujfx Aa Hekt Avialable immediately. On stock.

Condition: used, Year of construction: 2012, operating hours: 9,974 h, total height: 2,700 mm, total length: 7,700 mm, total width: 2,420 mm, Empty weight: 7.390 kg CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Dkodpfjwnhccex Aa Hjt Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Details: - └ Description: Machine gives malfunction spindle - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002032 - Operating hours: 9974 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Transport dimensions: 7700mm x 2420mm x 2700mm (l x w x h) - Transport weight [kg]: 7390kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Dsdpfjylp S Esx Aa Hskt Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / plywood Coated panel materials The machine is fully operational and ready for use. Viewing possible anytime by appointment. Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Unladen weight: 1,240 kg Voltage: 400 V Power consumption: 10 A EQUIPMENT Dkjdpfjy Akdxsx Aa Hot CE marking

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, SCM GABBIANI P80 – Automatic CNC Beam Saw Dedpfxjwtgdij Aa Hokt Brand / Model: SCM Gabbiani P80 Year of manufacture: 2022 Location: Croatia Condition: Excellent working condition, currently in production Technical specifications: * Panel dimensions: 3300 × 3200 mm * Main saw motor: 11 kW (15 HP), blade Ø 340 mm * Scoring unit: 1.3 kW, blade Ø 200 mm * Maximum cutting height: 80 mm * Saw carriage speed: 6–60 m/min * Pusher speed: up to 60 m/min * Installed power: 12–15 kW * Compressed air consumption: 300 NL/min * Dust extraction: 4 × Ø120 mm connections, total 2,190 m³/h Equipment: * Maestro Active Cut control system (PC/PLC) * eye-M operator console * Maestro Ottimo Cut optimization software * Label printer * Teleservice module The machine is in excellent condition and can be inspected under power. Available due to production reorganization and installation of a new automated SCM Flexstore system. Additional photos, videos and technical information available upon request.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Dkodjvvi N Iepfx Aa Hjt

Condition: used, Technical specifications: Djdpfozd Ap Tox Aa Hskt Spindle diameter: 30 mm Spindle height: 160 mm Swiveling spindle: -10° - 45° Speeds: 3000/4500/6000/8000/10000 rpm Manual adjustment of spindle height and angle Spindle lock Work table dimensions: 760/2500 x 1000/1500 mm Adjustable support arms Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 1500 mm Width: 2500 mm Height: 1350 mm