Used Schmidt 32-151-01 Presscontrol 60 for sale (36,556)

Condition: ready for operation (used), Schmidt 32-151-01 Toggle press PressControl 60 Compressive force: 15 kN Stroke: 40mm Follow-up time: 0.07 sec Dwsdpjulf A Ejfx Abvob Overtravel: 15mm PressControl 60 Two-hand operation You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: like new (used), Year of construction: 2019, operating hours: 300 h, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Dwjdszgq Szjpfx Abvsb Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: used, Year of construction: 2004, operating hours: 55,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 with original Arburg handling The machine is fully functional and ready for immediate use Technical Data: Year of construction: 2004 Operating hours: 55,000 h Screw Ø 18 mm Clamping force: 350 kN Core pull: 1*Hydraulic Valve gate: Pneumatic Selector switch Dwodpfxsu Hqino Abvjb Handling: Arburg Multilift H-side removal incl. deposit conveyor belt On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2011, condition: ready for operation (used), 2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement. Dodpfx Abey S A I Uovjwb

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 The machine is fully functional and ready for immediate use Dodsu Hqiujpfx Abvjwb Technical data Year of manufacture: 2005 Operating hours: 70,000 Screw Ø 25 mm Clamping force: 350 kN Valve gate: Pneumatic Core pull: 1*Hydraulic Internal pressure transducer Selector switch On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Force 32 kN, stroke 100 mm Dwsdezxmhpspfx Abvjb

Condition: excellent (used), Year of construction: 2003, Arburg 320S 500-60 Year of manufacture: 2003 Injection Unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 ccm Clamping Unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA Additional Equipment: Dwjdpfx Abezy Idzovob Euromap 12 Robot interface Air valve x 1 Controller with 6 hot runner zones Hardened injection unit - bimetallic Dimensions: Weight: 2,350 kg Length/Width/Height: 3.32x1.24x1.81 m Drive: Pump/Motor: 11 kW Heating capacity: 4 kW Total power: 15 kW All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Dedpfxjtyyn Hs Abvjwb

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. ! Price per unit ! Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Height: 360 mm Dwodpfswncv Rsx Abvsb Weight: 81 kg Inlet: DN 20 Outlet: DN 15 ! Price per unit !

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment Dodpezv Sarjfx Abvewb - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Year of construction: 1986, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Dedsxxziuepfx Abvjwb

Condition: used, mileage: 1 km, first registration: 10/2008, * Schmidt Salzstreuer Stratos S 50-42 VCLN 660 - Edelstahlbehälter * 5 cbm Inhalt * 2200 Liter Feuchtsalz * Bj 2008 * 1839 kg * 10000 kg Gesamtgewicht * Steuerung Djdpfx Ajzxaitebvjwb * * * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * * WhatsApp ·

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 16,191 h, load capacity: 13,600 kg, lifting height: 5,300 mm, free lift: 2,650 mm, fuel type: diesel, mast type: duplex, construction height: 4,100 mm, fork carriage width: 2,450 mm, fork length: 1,200 mm, empty load weight: 18,300 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease purchase and financing at favorable terms are always possible for us. We are also happy to buy your used forklifts outright, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this 13.6 60-32 model. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Side shifter, fork positioner, Dsdpfxsxxdy Ae Abvowb Fork positioner opening range: 630 / 2,280 mm Heater, full cab, full free lift,

Condition: used, Year of construction: 2011, gearing type: other, first registration: 01/2011, color: orange, mileage: 1,001 km, empty load weight: 616 kg, driver cabin: other, Vehicle location: Bovenden, Body: Salt spreader approximately 2 m³. The salt spreader was mounted on a Unimog U300! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; changes, prior sale, and errors reserved! Dwodpfxjyuw Rbs Abveb

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/60 Dwsdpfex Ngiksx Abvsb -Elbe .: 0.106.110.0001 -Flange Ø 65 mm -Bolt circle: Ø 52 x 6 mm -Dimensions: Ø 65 x 320 mm -Weight: 2 kg

Condition: used, Year of construction: 2003, gearing type: other, first registration: 01/2003, color: orange, mileage: 1,001 km, empty load weight: 1,739 kg, driver cabin: other, Vehicle location: Bovenden, Body: Salt spreader approx. 6m³ Capacity: 6m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dsdpeuuldhofx Abvowb - .

Condition: good (used), Year of construction: 2001, Air-operated airless pump on a pump trolley The T2001 piston pumps are robustly constructed air-operated airless pumps designed for conveying, transferring, and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE, or PE. Dwedpfxort Uy No Abvsb ATX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during pumping and spraying - Versatile thanks to stainless steel, carbide, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning thanks to the self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction head (empty pump): 1.5 mWS Suction head (filled pump): 6.5 mWS Material temperature: +10 to +85 °C Maximum stroke rate (short): 50 cycles/min Maximum stroke rate (continuous): 20 cycles/min Maximum material pressure: 6 bar Transmission ratio: 60:1 Volume per cycle: 270 cc Maximum operating pressure: 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4" Material outlet: G3/8" Material inlet: G1" Weight: 45 kg Customs tariff number 8424 8970 Year of manufacture: 2001 New price: €13,600 incl. VAT. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2007, gearing type: other, first registration: 01/2007, color: orange, overall weight: 10,000 kg, mileage: 1,001 km, empty load weight: 1,502 kg, maximum load weight: 8,498 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Roll-off salt spreader Lye capacity: 2,200 l, grit capacity: 5 m³ The salt spreader was mounted on a roll-off frame! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dwsdpfxer Hdhlo Abvsb - .

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm Dwsdegrzh Eopfx Abvjb tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) Dwedjyt R S Aspfx Abvsb delivery time: on request terms of payment: 100% prior to delivery

Condition: used, mileage: 38,538 km, power: 120 kW (163.15 HP), first registration: 01/2013, overall weight: 12,100 kg, fuel type: diesel, color: white, axle configuration: 4x2, empty load weight: 6,500 kg, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, loading space volume: 5 m³, Year of construction: 2013, operating hours: 8,260 h, Equipment: additional headlights, air conditioning, hydraulics, Street sweeper: - Schmidt - Cleango 500 - Year of construction 2013 Dsdpfx Absqxt N Rovjwb - 4 cylinder VM diesel engine (R56), 120kw, Euro 5 - 38,538 total kilometers; 15,806 sweeping kilometers - 8,263 engine hours; 6,175 driving hours; 5,418 sweeping hours; 5,754 blower hours - 3. brush can be moved sideways at the front + swivels Fresh water tank with dust binding nozzles - 5m³ stainless steel hopper - Hydrostat - 2-seater - Yellow lights - Climate control - Unladen weight: 6,500kg; permissible GG: 12,100kg - 5485mm x 1810mm x 2870mm (lxwxh) - Municipal vehicle from 1st hand You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: good (used), Year of construction: 2011, functionality: fully functional, Offered is a Bizerba FK-32 bone saw band saw, built in 2011. The machine is fully functional. Further details available upon request. Cash or prepayment! Sale to businesses only. No guarantee or warranty. Dsdpfsv Npbqex Abvjwb

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW Dwedpfjzqglrsx Abvjb - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Year of construction: 2023, condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Dedpfxjvuafko Abvewb

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UM 113 . 325 002-01 SN: 8115060 in an exchange service. The unit has been professionally overhauled and fully tested, with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective core unit must not have any mechanical damage such as fractures, as these are irreparable. In such cases, an additional charge of €500 incl. VAT will apply. Dodpex Etbxefx Abvjwb