Used Schäfer Plate Roll for sale (18,912)

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min Ksdpfoy Aubujx Amrolu power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: good (used), functionality: fully functional, Year of construction: 2012, MG SRL MH 316 C 4 Roll Plate Rolling Machine- Year 2012. 4-roll plate bending machine. 3000 mm up to 16 mm. Upper roll diameter 340 mm. Ksdpfx Amozc Rkwjrjlu Lower and lateral rolls 310 mm.

Condition: used, functionality: fully functional, Year of construction: 2013, MG SRL AR 140 Profile Bending Ring Rollers- Year 2013. Specifications Shaft Ø140 mm Number of rolls 3 Resistance moment 130 CM³ Capacity flat 220 x 50 x R=2000 mm Horizontal and vertical Yes, Horizontal + Vertical . Stroke X-Axis 400 mm Capacity Tube 180 x 4 x R=4000 Ø x mm Capacity bar 80 x 80 x R=1000 mm Capacity HEA-Profile 180 x R=1800 mm. Dimensions Length 2100 mm Width 1900 mm Height 2100 mm Weight 6500 kg Kljdpfszc N Rcjx Amrou

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Kljdpfx Aswtpgtjmrou Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Condition: used, sheet width 1050 mm plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Kjdpfszfayfox Amrolu Weight ca. 490 kg Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel; suitable for conical bending Emergency stop cord The machine comes from a training workshop and is in very good condition

Condition: excellent (used), Year of construction: 2000, control type: NC control, actuation type: hydraulic, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), 4 roll plate bender Davi Promau - MCB 3037 MACH-ID 9613 Make: Davi Promau Type: MCB 3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication Klsdszcnuyjpfx Amrou Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, sheet width 2050 mm plate thickness 20.0 mm ST pre-bending 16.0 mm ST diameter of upper rolls ca. 270 mm side roll diameter ca. 240 mm diameter of lower rolls ca. 250 mm Number of working hours ca. 7.800 h Control "EASY PRO" oil volume ca. 200 Liter voltage 380 V total power requirement 13.5 kW weight ca. 9.000 kg Dimensions (only the machine) 4000 x 2080 x 1800 mm Good condition (!!) Current list price approx. 150.000 euros Special price available upon request Features: - Robust electro-hydraulic 4-roll round bending machine * Arc-shaped feed of the side rollers (swing arm technology) - 4-roller design offers a wide range of bending and rounding options * Rolling process completed in a single pass - Mobile control unit * DAVI "DAVI EASY PRO" numerical control * Manual or automatic operation selectable * Programming "Self-Learning" mode available * Control of all rollers and machine axes * Digital position display for the rollers - Curved feed of the side rollers (DAVI "PSG" guide system) * Tight bending radii of up to 1.1 times the upper roller diameter possible * Instead of the usual 1.5 times with linear guides * Optimal bending = short sheet ends during bending - Conical rolling possible via roller tilt * Tight diameters possible due to low machine frame - Electronic roller parallelism - Stepless speed adjustment (max. 5.0 m/min) Kjdpfxjzc Rv Ts Amrelu - Bending on both sides - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Easy sheet removal thanks to low machine frame - Sturdy welded steel construction - Electro-hydraulic swivel bearing for easy tube removal - Operating instructions

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in Ksdpfx Amexdigferelu - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls Klsdpfx Amozbqquerou Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Kledpfx Amezcpu Usrou Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display Kljdpsx Sr Dfefx Amrou * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop Kljdpfx Amsxn Rrqsrou - Documentation - 400V

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls Kodpfx Ajkvm S Nemrjlu 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight Ksdjkvm Szopfx Amrelu 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender Kjdpfx Asy Expusmrolu HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Kledpfokwcc Njx Amreu

Condition: good (used), Year of construction: 2000, Technical specifications: Kjdozbmw Depfx Amrjlu Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Conical bending unit through angled positioning of the two side rollers Mobile control panel Hydraulic folding bearings Motor power: 31 kW Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1991, 3-roll plate bending machine Plate width: 3000 mm Plate thickness: 20 mm Pre-bending: 16 mm Top roll diameter: 380 mm Side roll diameter: 340 mm Kedpfezd Dpnox Amrjlu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11/10575, working width: 3,000 mm, sheet thickness (max.): 16 mm, TECHNICAL DETAILS Sheet metal width: 3,000 mm Sheet metal thickness: 16 mm Kledpfozapqwjx Amreu Control system: conventional MACHINE DETAILS Rated current: 63 A Voltage: 380 V

Condition: good (used), functionality: fully functional, Year of construction: 2012, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 160 mm, roller diameter: 180 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 600 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, total length: 4,000 mm, total width: 1,100 mm, total height: 1,300 mm, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Plate bending roll 2000 X 8/6 mm year 2012 Biko model B3-2016 PYRAMID LINEAR GUIDEWAYS DUAL PRE-PINCH 3-ROLL Bending capacity -Plate width 2000 mm -Rolling plate thickness 8 mm -Prebend thickness: 6 mm Rolls dimensions: Useful length 2050 mm top roll D 180 mm side rolls D 160 mm Configuration of the machine Rolls hardened induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls Conical bending hydraulic attachment Kledozff Uuspfx Amreu Re-rolling system welded shells rounding. Opening hydraulic front drop-end Extended shafts front side for use as profile bender. Electric 3 phase 400/50 Vac, power 7,5 Hp. Digital position readouts of the bending rolls.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Kljdpfx Aezbcwmemrju Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2004, total length: 4,400 mm, total width: 1,300 mm, total height: 1,200 mm, Colour: Grey Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20440160 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 4 - Max. prebending thickness [mm]: 3.5 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 170 - Bottom roll diameter [mm]: 160 - Options: Digital readout, Cone rolling - Transport dimensions: 4400mm x 1300mm x 1200mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Kledeyym Tdopfx Amrou VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2003, total length: 3,230 mm, total width: 1,150 mm, total height: 1,120 mm, Colour: Grey Empty weight: 1.400 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 220281 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 Kedpfxex Tuy Es Amrjlu - Number of driven rolls [pcs]: 3 - Power [kW]: 2.2 - Max. sheet thickness [mm]: 2 - Max. prebending thickness [mm]: 2 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 110 - Bottom roll diameter [mm]: 110 - Bending speed [mm/min]: 3 - Transport dimensions: 3230mm x 1150mm x 1120mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, control type: manual, 3-Roll Round Bending Machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Type: PV 7 H Serial Number: 804, overhauled in 1987 The machine has a very robust design and was only used for single-layer bending. Kodozba Atepfx Amrelu Max. bending length: 2500 mm Max. sheet thickness: 16 mm Taper bending device Upper roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a platform can be purchased for use around the machine.

Condition: good (used), functionality: fully functional, Year of construction: 1999, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller model: 4 axis digital readout, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 370 mm, roller diameter: 370 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 1,900 mm, sheet thickness (max.): 40 mm, overall weight: 15,000 kg, total length: 5,300 mm, total width: 2,100 mm, total height: 2,400 mm, power: 25 kW (33.99 HP), input voltage: 380 V, number of digital displays: 4, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 roll plate bending machine Faccin model hydraulic 4HEL2,5 30/25 year of make 1999 Linear guideways rolls motion plate width 2500 mm plate thickness 30 mm rolling capacity 2500 x 30 mm prebend 2500 x 25 mm top roll size 370 m lower roll size 350 mm surface on the rolls 2550 mm voltage 380/50 power installed 25KW configuration installed Hardened surface of the 4 rolls conical plate bending hydraulic open drop-end digital position readout of the rolls. NC programmable 4 axis Klsdpfx Amszd Sw Tereu Control panel electric