Used Samzon 104L-18 for sale (10,863)

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: manual, Samzon Pile-turner 104L is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry. A major advantage with this machine is that the platforms can close-down to 320mm, which means the Samzon Pile-turner can handle very low products. Samzon Pile-turner closes around the product with platforms, tilts back by 90 degrees, the tower is released and is rotated manually 180 degrees and once again locked. The bottom platform is then lowered back down, the platforms open, and the products has been placed on a new pallet. The pallet is fed into the machine using a pallet truck or pallet jack. The pallet turner can be delivered with a variety of extra equipment and surface treatments. Dodpoxyuqzjfx Aa Hjkt

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 104L, Equipment: documentation/manual, The Samzon Pile Turner 104L is a stationary pallet turner used for rotating pallets and stacks of paper. This machine is suitable for pallets with a maximum size of 1200mm x 800mm. The pallet is placed in the machine using a pallet truck or hand pallet jack. The machine can rotate the product 180 degrees manually. The platforms are clamped against the pallet and stop via an adjustable pressure sensor. This pallet turner is primarily used in printing companies. Dkjdpfx Aaoy Ufiaj Hst The pile turner is easy to operate using push buttons on the control panel. Maximum opening: 1800mm / minimum 320mm Maximum weight: 1000kg Manual operation

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 215 mm, spindle bore: 41 mm, turning diameter over bed slide: 380 mm, turning length: 1,000 mm, total length: 2,900 mm, total width: 1,050 mm, total height: 1,410 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 30 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, The lathe underwent a general overhaul in 2011 by M-MOOS spol. s.r.o. During the overhaul, it was fitted with an Omron Varispeed 7 frequency converter for convenient speed regulation during operation and to reduce current surges. The lathe's accessories include: a fixed and a movable steady rest, a faceplate, 2 chucks, a clamping angle, a rotating center for the tailstock (Morse 4), a micrometric stop for longitudinal and transverse feed, 1 coolant system with a pump, and an operating manual. Technical parameters: swing over bed 380 mm, swing over carriage 215 mm, distance between centers 1000 mm, bed width 340 mm, spindle bore 41 mm, spindle taper metric 50, tailstock center taper MORSE 4, spindle speed range 30 - 2800 rpm, main DC motor power 10 kW, maximum machine dimensions: length: 2900 mm, width 1050 mm, height 1410 mm, machine weight 2000 kg. The overhauled lathe was used for maintenance purposes by a large manufacturing company. The machine can be tested in our warehouse in Přerov by appointment. Dkjdpezy Shwefx Aa Hst

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Dksdpfjyatkbjx Aa Hjt Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), functionality: fully functional, Weld edge former - Italy Djdpjzzmh Usfx Aa Hskt

Condition: repair required (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, documentation/manual, - SK 40 tool holder - The machine is currently idle. Dsdpfxsywpa Ij Aa Hjkt - The buffer battery is empty, which has caused the connection to the PLC to be interrupted. The machine can be inspected under power at any time.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE Certified Model RP 18/U Year 2012 Dsdpfozb Imasx Aa Hekt Siemens SIMATIC OP17 CNC Control Panel Reference F24 €9,500 (including transport)

Condition: used, first registration: 10/1992, color: other, Year of construction: 1992, OLD QUALITY HEAVY DUTY WOOD TRAILER , EXTENDIBLE , WITH JONSERED 2190 CRANE. Dkodpoy Emnxefx Aa Het

Condition: used, Year of construction: 2025, New demonstration machine! Price on request! The CONTROL has always defined its own class – the premium class for vertical panel saws. But even this leading position doesn't stand still. We have developed the CONTROL into the premium class's vertical cutting center, with increased automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and the new machine software ensure improved ease of operation in every detail. Saw frame: • Machine components manufactured to a precision of 1/100 mm • Solid, self-supporting, firmly welded, and torsion-resistant saw frame • Full-surface support table made of birch plywood with integrated small parts support • Auxiliary fence profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller locking during the sawing process Saw beam: • Stable, durable saw beam steel construction • Automatic saw beam locking with cutting interface detection Saw unit: • Backlash-free, smooth-running guides • Robust mounting of the motor carriage ensures high cutting accuracy • Powerful, high-torque 5.5 kW motor (7.5 HP) • More comfort thanks to largely automated operation • Laser-assisted display of the horizontal cut • Automatic motor carriage clamping • Automatic lowering and pivoting of the saw motor • Pneumatic clutch for easy switching to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control: • 12" touchscreen computer with optimal user guidance • Multilingual user guidance • Tool database guarantees high flexibility and absolute repeatability • Fully automatic sawing process • Infinitely variable feed speeds 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connection • UPS 24VDC for touch PC (uninterruptible power supply) Dimension setting: • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Mounting: • Wall or free-standing mounting possible Saw blade: 300 mm, scoring saw, 60 teeth Cutting range: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm, consisting of: 1.00 Cutting interface distance vertical 1000 mm 1.00 Language documentation DE 1.00 Saw motor 1-phase, 400V, 50Hz, EVO/CON 1.00 Feed speed 10-25 m/min 1.00 Scoring saw unit VSA (scoring saw infinitely adjustable) 4.00 Free-standing support, complete 1.00 Small parts support, aluminum, complete (2-part) 1.00 STRIEBIG ExpertCut CON consisting of: - Electronic positioning system EPS-X - Automatic saw beam positioning ASP - User guidance with STRIEBIG ExpertCut software license for 1 office workstation (network license) - Label printer - Network connection - Operating manual - Paper holder 1.00 UPS 24VDC for touch PC (uninterruptible power supply) 1.00 Block parts, initial license 1.00 Service: data import / label layout (remote) 1.00 Basic training STRIEBIG cutting optimization (online training) Storage location: Rieth Dkedpfx Aozx E T Dsa Hot

Condition: used, Pastochef Range Electrical power Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Drying program after washing Dkjdpfx Aaezx Un Ro Hst Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.

Year of construction: 2026, condition: like new (used), functionality: fully functional, machine/vehicle number: 95-14-16, As new Compact spiral freezers for sale 2 Available Built in 2026 Dksdpozrwngofx Aa Hot 457mm wide stainless steel belt with overlay Ashworth Omni grid Belt 95mm Product gap 155 Tier pitch Main drive - 4Kw 1600 diameter drum Goedhart Freon evaporator Available with refrigeration Message and we will send over the full spec with more photos

Condition: like new (used), Year of construction: 2009, bore capacity in steel (diameter) 20 mm x-travel 240 mm y-travel 160 mm table-size 430 x 240 mm spindle taper MT 2 spindle turning speed - stepless 200 - 3600 U/min quill stroke 75 mm voltage 400 V total power requirement 0,7 / 1,3 kW weight of the machine ca. 220 kg Dkjdpfszyvadjx Aa Het dimensions of the machine ca. 0,60 x 0,85 x 1,65 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 187426 - Stepless speed adjustment - Digital speed display - Cross table - Collet chuck - Mounted on a base frame

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pile-turner 104LVA pile-turner is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry. A major advantage with this machine is that the platforms can close-down to 320mm, which means the Samzon Pile-turner can handle very low products. Samzon Pile-turner closes around the product with platforms, tilts back by 90 degrees, the tower is released and is rotated manually 180 degrees and once again locked. The bottom platform is then lowered back down, the platforms open, and the products has been placed on a new pallet. Dodpfx Aasw U R Tcj Hskt The pallet is fed into the machine using a pallet truck or pallet jack. The pallet turner can be delivered with a variety of extra equipment and surface treatments. Samzon 104LVA PileTurner are fully equipped with vibration and vibration.

Condition: good (used), Year of construction: 2010, operating hours: 3,991 h, mast type: telescopic, color: white, Make of engine: DAF Working height: 1.800 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: NL Please contact Vink Machinery for more information Custers T265-18 on DAF * 2010 Dkodpfjzmfv Isx Aa Hot * 3991 working hours * Diesel * 18 meters working height * 11 meters horizontal range * 265 kg lifting capacity * Reversing camera * incl. documents

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC Dksdpszw Et Iofx Aa Hjt year of construction 1998 . Model : CB 18 . Series : B20 .

Year of construction: 2026, condition: new, functionality: fully functional, Samzon Pile Turner PT1800-20 is a stationary stack-turning machine used to rotate pallets, erect products, change pallets or damaged pallet layers. This machine can be used for very long pallets – up to 3500 mm – and the platforms can move down to a minimum of only 400 mm. The pallet is fed into the machine using a pallet lifter or pallet truck. The machine can either rotate the product 180 degrees or up to horizontal level, depending on the need. The platforms are pressed together against the pallet and stopped by a pressure switch, which can be easily adjusted. Dodpfx Aasw U Rr Sj Hskt When changing pallets, either due to a defective pallet or to change to a plastic pallet, the new pallet is placed on top of the product. The platforms press down on the product, rotate 180 degrees, and the product is now on its new pallet. Pile-Turner is operated simply and easily by pressing a button on the control panel. Max opening 1800mm / minimum 400mm Max weight up to 2000kg (option 4000kg) Manual or semi-automatic operation Customer-tailored solutions.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Waste disposal system with a central Vecoplan rotary shredder The core of this waste disposal system is a high-performance Vecoplan rotary shredder, type 55/18/3. The system handles the fully automated shredding and processing of edgings, slabs, residual wood, and bark from sawmill production. All material flows are automatically detected, processed, and fed to the respective discharge systems – for efficient and continuous production. Highlights High-performance Vecoplan rotary shredder 55/18/3 Continuous shredding of residual wood, slabs, and edgings Robust industrial design for multi-shift operation Integrated metal detection system to protect the machine Vibrating screen with separation into four material fractions Automatic conveyance of wood chips, sawdust, and bark Scraper chain conveyors and vibrating chutes for continuous material flow Complete electrical control system including system cabling Key technical data Drive power: 55 kW Infeed opening: 550 × 180 mm Rotor diameter: 600 mm Rotor speed: 730 rpm Throughput capacity: up to 10 cubic meters/h Wood chip length: approx. 25 mm Dsdpfx Aaszwb Une Hskt Screen hole diameter: 30 mm Vibrating screen: 3 screen levels Material separation: 4 fractions

Condition: ready for operation (used), Telemecanique ATV18D16N4 ALTIVAR 18 frequency inverter SN:1028116112, used, normal signs of wear, 100% functional, scope of delivery as per photos. Dkedpszzifcefx Aa Het

Condition: used, Hydraulic Power Unit 21 kW, with Tokimec Vickers Pump, Used machine Manufacturer (Motor): Shin Sheng Precision Ind. Co., Ltd. (Taiwan) Type (Motor): EEF-TL (Frame: 180M) Manufacturer (Pump): TOKIMEC INC. / Vickers (Japan) Type (Pump): SQP2-21-1C-18 Year of manufacture: 1995 Condition: Used, industrial execution Overall dimensions: 900 x 450 x 700 mm Dksdpfxszzc U Rj Aa Hst Technical and operating parameters: Electric motor power: 21 kW (25 HP) Supply voltage: 380 V / 400 V (3-phase, 50 Hz) Current rating: 38 A Motor speed: 1450 RPM Pump design: Tokimec Vickers low-noise hydraulic vane pump

Condition: used, mileage: 153,000 km, power: 235 kW (319.51 HP), first registration: 12/2023, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Isuzu Citiport 18 articulated bus with 45 seats & 110 standing places - air conditioning - ZF EcoLife automatic transmission - matrix display system - * Diesel - 8,900 cc³ - 269 kW - 366 hp - Euro 6 - green environmental badge - new TÜV inspection - from first owner - * 45 seats + 1 driver + 1 wheelchair space with manual wheelchair ramp - 110 standing places * Auxiliary heater / radio / ABS / ASR - 3 x double-width doors - LAWO LED matrix display system - * Vehicles are equipped with ZF Ecolife transmissions and the large TECTOR engine * Vehicles are in their original white color and currently wrapped in pink for rail replacement service * Vehicle dimensions: Length: 18,200 mm x Width: 2,550 mm x Height: 3,136 mm * German vehicles - German vehicle registration documents - price is per vehicle - * Errors / printing errors & prior sale reserved - vehicles available immediately - * Please make an appointment for viewing & test drive * Contact person: Andreas Vogel * ATTENTION - Vehicles are stored outside - Please inquire about the exact location - ATTENTION - Dkodpfszwi Ivox Aa Hst

Condition: excellent (used), Year of construction: 2005, operating hours: 8,411 h, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Isuzu Weights Empty weight: 12.700 kg Functional Lifting capacity: 250 kg Working height: 2.000 cm CE mark: yes Maintenance, history and condition Dkedszzl Dujpfx Aa Hot Number of owners: 2 Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Max. horizontal reach: 1600 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Latest inspection: 2026-09-08 Additional information Please contact Martyn Joosse for more information

Year of construction: 2021, condition: used, machine/vehicle number: 117500730003, Temperature control unit from the manufacturer Regloplas, used and in untested condition. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates in a two-circuit system with the RT100 control system. Pressurized water is used as the medium, and the maximum supply temperature is 160 °C. The heating capacity is 18 kW, and the pump performance is 2 x 60 l/min & 6.0 bar. The unit is equipped with two magnetic coupling pumps (Speck CY-4281). The year of manufacture is 2021, and the total weight is 230 kg. Dkjdoy Suikspfx Aa Hst

Year of construction: 2021, condition: used, machine/vehicle number: 117500730004, Temperature control unit from the manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates in a two-circuit system with the RT100 control system. Pressurized water is used as the medium, and the maximum supply temperature is 160 °C. The heating capacity is 18 kW, and the pump capacity is 2 x 60 l/min and 6.0 bar. The unit is equipped with two pumps (CY-4281.0823). The year of manufacture is 2021, and the total weight is 230 kg. Dksdpfx Aaey Suhys Hst

Condition: used, axle configuration: 2 axles, first registration: 06/2013, suspension: air, Year of construction: 2013, Suspension: Air suspension Unladen weight: 2,700 kg Payload: 15,300 kg GVW: 18,000 kg MOT (periodic technical inspection): valid until 08/2027 Vehicle number: Trailer: 20 Schmitz Cargobull AWF 18 / BDF / 2 axles .: WSK000001273866 TÜV: 08/2027 - Inspection date: 02/2027 2 axles Unladen weight: 2700 Total weight: 18000 Djdpfxezycyqs Aa Hekt No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. = Company information = No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, maximum load weight: 10,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2015, loading space length: 7,158 mm, loading space width: 2,505 mm, loading space height: 2,250 mm, total length: 9,910 mm, total width: 2,600 mm, total height: 3,665 mm, Equipment: ABS, SCHMITZ CARGOBULL ZKO 18/L – REFRIGERATED/ISO SEMI-TRAILER – AIR SUSPENSION – LBW 2.5 T Dkjdpfxezt Ubys Aa Hjt ----VEHICLE HISTORY * German vehicle * Video of the vehicle available upon request (interior & exterior views) ----Schmitz Cargobull Refrigerated Semi-Trailer / Through-Loader General* Manufacturer: Schmitz Cargobull * Type: ZKO 18/L FP 45 COOL DL * Vehicle type: Refrigerated semi-trailer / Through-loader Internal dimensions* Length: 7,158 mm * Width: 2,505 mm * Height: 2,250 mm Chassis* 2 axles * Schmitz axles * Air suspension * Disc brakes * WABCO braking system Tires* 385/65 R22.5 Tail lift* PALFINGER MBB C2500 * Year of manufacture: 2015 * Serial number: 83518569 Equipment * Through-loader * Reversing camera * WABCO parking sensors * Work light * Side marker lights * 2x storage boxes * ASW Weights* Permissible total weight: 18,000 kg * Axle load 1: 9,000 kg * Axle load 2: 9,000 kg Other* WAP Fahrzeugtechnik ----EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES AND 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least 500.00 / 1,000.00 is required. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are made exclusively according to our general terms and conditions – see website Important note – Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.