Used Samson Pg Ii for sale (2,404)

Condition: used, Year of construction: 2021, _____Sold on behalf of the customer: approximately 125,000 cubic meters used – trailed unit, K80 hitch. Drawbar suspension, hydraulic. Support foot – discharge pump with stone collection basin, inspection cover – hydraulic operation for emptying the stone collection basin – hydraulic ball valve for guiding function, sectional discharge – level gauge, automatic flow rate regulation, – Slurry Master 8000 with joystick, Isobus power supply – load-sensing control, electronic wheel control – ejector docking arm 2 with filling pump and level switch – filling hose for ejector docking arm 2 with 8" Bauer coupling 90°, – active rear three-point linkage CAT3 with height position sensor, rear operation, – 2 double-acting connections at the rear – 2 axles with air pressure brakes, 1 fixed & 1 steerable axle, – tires VREDESTEIN 750/60R30.5 – tire pressure control system with hydraulically driven compressor, – volume 19.8 m³ – LED lighting, rotating beacon – 1 work light 1000 lumens at the rear – HELLA LED work lights 4 on the machine and 1 at the rear – camera at the rear including screen, – wide-angle universal joint shaft 1 3/8 – central lubrication with pump for PGII, 3-point lift, docking arm & rear-mounted implement. Optional: 15 meter Bomech trailing shoe distributor. Location: null. Podpfxjzu Uy Ee Aicjgr

Condition: used, Simatic Field PG / Programming Device / Programming Computer / Laptop / Step 5, Step 7, ProTool, Notebook SIEMENS Type PG 720 PII Year of manufacture: approx. 1999 CPU: Intel Pentium II RAM: 192 MB Operating system: Windows 98 SE Hard drive: HDD 6 GB Display: 12" LCD (swivel-mounted) Input: Detachable keyboard, trackball Drives: 3.5" LS-120 floppy drive, CD-ROM Interfaces: - EPROM slot Pgjdpfxsx E Ayws Aicor - PC/Card (PCMCIA) - MEM-Card - 1 x Parallel port - 1 x Serial port (RS232) 25-pin - 1 x Serial port (RS232) 9-pin - 1 x VGA out - 1 x USB - 1 x MPI/DP 9-pin - external power supply with power cord - In carrying case Installed Siemens software: - Step 5 V7.14 - Step 7 V5.1 - Step 7 MicroWin V5.2 - ProTool V5.2 - ProSave V1.1 - Logo!Soft V2.0 Overall dimensions (W x H x D): 400 x 270 x 200 mm (in carrying case) Total weight: 6.5 kg Computer operates, display functional, CMOS backup battery drained, Battery for mobile operation not functional, device boots. Siemens software operational.

Condition: like new (used), Industrial Control Valves & Instrumentation – New & Used Pgjdpfx Aiezwd H Hecsr Mixed lot of high-quality industrial control valves, actuators, and instrumentation, including SAMSON and Endress+Hauser. The lot consists of new/unused surplus and used equipment, including pneumatic control valves, positioners, actuators, and flowmeters in various sizes and specifications. Condition: New/unused surplus & used Brands: SAMSON, Endress+Hauser, and others Available: As one complete lot Delivery terms: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: good (used), Year of construction: 2001, Quaser MV 204 II + 4th axis indexing head Year of manufacture: 2001 Control system: Pgodezwmv Ropfx Aicjr - Siemens 810D - Electronic handwheel Spindle: - Max. 10,000 RPM Travel distances: - X – 1020 mm - Y – 600 mm - Z – 560 mm Table: - Table size 1200 × 635 mm - Max. table load 1000 kg Tool changer: - 24 magazine positions Availability: - Immediately available

Condition: used, Year of construction: 2004, operating hours: 2,000 h, machine/vehicle number: PST17, Used Pasteurizer brand PG Completely Overhauled Used Pasteurizer Completely Overhauled for jars or cans in d.b. PG brand, all stainless steel with squared stainless steel mesh, complete with 4 water recycling tanks with relative pumps. Pasteurizer equipment for sale with inlet and outlet belt, blower for drying jars or boxes at the outlet, steam modulating group, shell and tube heat exchanger, various pipes connections, and all its accessories for operation. The pasteurizer equipment for sale is totally overhauled Pasteurizer equipment is made up of two sectors of 9500 mm each Overall dimensions of the Used Pasteurizer PG: Pgsdpfjvguhwsx Aicor Total length 19.00 m Useful belt length axis by axis: 18.60 ms Useful net width 2.50 m. Overall width 2.70 m machine body Overall width including trays 3.30 m Total useful area of the Used Pasteurizer Completely Overhauled sq.m. 46 Features by section: Sterilization length: mm. 8,600 Pre-cooling length: mm. 2,500 Length of warm water cooling: mm. 5,000 Cooling length: mm 1900 Single track entry belt width: mm 150 Length: mm 3800 Outfeed belt with 4 lanes width: mm 350 Pasteurizer equipment for sell length: mm 3500 Services for pasteurizer equipment for sell: We also offer the machinery reinstallation service at your company if you need it. We will create a dedicated offer if you wish, only after receiving all the necessary information. Upon request, we can also modulate the control panel and intervene on the machine’s PLC. This is used to customize the functionality of the used pasteurizer for sale. If requested, we also provide the packing service if the goods are destined abroad and with transport by ship. One of our team of technicians will be at your service and will create a tailor-made project for your company. We have many solutions available for this pasteurizer equipment for sell, contact us at the numbers on the site for more information and to receive a quote for one of our used bottling machines. Additional information: For this pasteurizer equipment for sell it is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized. The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request. Pgodpfsziuazjx Aicor

Condition: good (used), Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve Pgsdoiq Th Sepfx Aicer -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 1x controller available -Price per piece -Dimensions: 270/95/H90 mm -Weight: 1.2 kg/pc.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. Pjdpjzdz S Tofx Aicogr The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Your contacts in our company: Mr. Falk Deutsch Psdpfoxxrhnsx Aicogr Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Pgedpfx Aijzi Tmascjr Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Pgedjh S Uhfopfx Aicjr Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: used, Year of construction: 2015, Manufacturer : Samson Model: 3241 Year : 2015 Type : Linear valve Nominal diameter : Ø DN 80 Pjdpfx Aisx R Dbgocsgr Nominal pressure : PN 40 Composed of a globe valve and an actuator

Condition: good (used), functionality: fully functional, In this offer you are purchasing a ‘Canon RCT 2 / II’ finishing option as good as new Object of sale: 1 x Canon RCT II suitable for various Canon models Counter readings: Total: Approx. 555 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Pgodpfou Rbb Njx Aicsr The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), tem: D-7856-Samson-steam Valves Diverse steam valves made by Samson complete with control box! Podsirfb Espfx Aicjgr For more informations please contact us! DN 20/DN40/DN50/DN65/

Year of construction: 2001, condition: excellent (used), JAROMA DCGA II LIGNUM curved edge bander Producer JAROMA DCGA II machine model / type Year of production 2001 Machine category Edgebander Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Startup type Pgedogyz Rkopfx Aicjr to be agreed Description Comments Equipment: - plate - guillotine - glue spreader - clamp - feed - adjustable table at 0-45 ° - workpiece thickness 1-4cm - edge thickness 0.03-0.3cm - 2 types of feed speed 4m / min, 6m / min - 2kW motor Overall dimensions: - length 127cm - width 165cm - height 148cm - weight 300kg - used edgebander - very good condition - unpainted - Polish production - year 2001

Condition: refurbished (used), functionality: fully functional, total width: 2,500 mm, total length: 7,000 mm, total height: 2,600 mm, The following applies to used equipment that undergoes a general overhaul: - New polyamide guide sleeves and sliders - Electrical systems and control elements are completely renewed and brought up to the 2026 technical standard Pedpfx Aiezazirscogr - Complete replacement of hydraulic hose lines in the press and aggregate - Cylinders are reconditioned with new seal kits - Valid UVV/E-Check for 1 year - Steel structure is renewed if necessary Any special equipment is available upon request. The images shown are sample images of machines that have already been sold. Every inquiry or offer is tailored to the customer and their requirements.

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Pgsdpfsxbd U Ejx Aicjr

Condition: like new (used), Year of construction: 2017, operating hours: 1 h, functionality: fully functional, We offer refurbished turbines from a hanger-type shot blasting machine - Cogeim PG 10x15/2TR, year 2011. Shot blasting machine, sandblaster, blasting turbine, sand blasting, shot blasting. Psdpfjy Nwq Ssx Aicsgr

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Podsv Uvdpspfx Aicjgr Original price: over €40,000.00 Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. System in inspected condition with inspection logbook, fully functional and ready to use immediately. Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers!

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Good working condition Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Main spindle dimensions: diameter 70mm, length 420mm Feed rate (cutting): 5-25 m/min Machine dimensions: length 2200mm, width 1500mm, height 1900mm Machine weight: 2850kg Voltage: 380V Pgjdpfx Aioy E Snqjcor Main motor power: 30kW and 22kW (2950 min-1) Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: used, Year of construction: 2005, Serial Number 177554 YOM 2005 Mazatrol 640m Control EIA & Mazatrol Programming 30 Tool Magazine CAT Tooling 4th Axis Swarf Conveyor Mazak Tool length measuring unit Pgedpfxjzilp Ts Aicor Spindle thru coolant UK Buyers - Price £42,000 +VAT Carriage/delivery is additional

Condition: used, Year of construction: 2008, functionality: unexamined, Star SR-20R II sliding head CNC lathe Year (2008) with Fanuc Series 18i-TB control Parts conveyor LNS Turbo HB swarf conveyor FMB Mini Mag 20 / 3200 barfeed Pgsdozmalkopfx Aicer 2 available

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Pgsdpjzt Spnjfx Aicjr Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: excellent (used), Robert riser roto claw its just had brand new electrics. Handles blocks up to 9.5’’ thick and 21’’ wide. Blocks can be stacked using the built in air operated loader to achieve higher production. Pedpfxjur Ngus Aicsgr

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Pgodsyh N Aaepfx Aicjr Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor