Used Robot Assembly Station, Dosing Station for sale (10,598)

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Cjdpfjibx S Nox Am Rjrc Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V current intensivity 40 A output 15 kw operating pressure 4,5 bar weight 1.600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved. Cjdpfxszbvmhj Am Rsrc

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Crodjwv Tqbepfx Am Rjc Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Automatic Desiccant Cap Dosing and Assembly Line – REBEL RV5959 (Year 2012) This fully automated line receives unprocessed plastic caps and converts them into functional caps with integrated desiccant for containers requiring controlled humidity. Designed for pharmaceutical, nutraceutical, cosmetic and food industry applications. The system integrates the following operations in a single line: • Cap feeding • Punching and insertion of cardboard barrier discs • Precise dosing of heated silica gel • Thermal and anti-static control • Insertion of inner plastic seal • 100% inspection by machine vision • Dynamic weighing and automatic rejection • Final accumulation on rotary carousel • Dual-lane production • Multi-station servo-driven rotary carousel The line is equipped with: • 2 stainless steel feeders + conveyor systems • Dual external support for cardboard reels • Industrial aspiration/extraction unit • Servo-driven rotary table Codpfxex Hh R Rs Am Rerc • Complete VARPE V2000 checkweigher with rejection system • Six-position outfeed carousel • 5 Basler cameras + Cognex VisionPro software • Heated silica dosing hopper • Anti-static ionizing unit • 24 high-precision volumetric dosing chambers • Electrical cabinet with PLC, HMI and industrial PC • Integrated dehumidification system

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Crjdpob Tmrvjfx Am Roc Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Credpfx Aoytx Urem Rec Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: new, Ruchser standard offer with layout for a timber window production line featuring profiled glazing beads and screwed corner joints. Daily capacity approx. 30 windows The production line consists of: Pos. 1.0 – Article 107850000 1 piece RU-PWD-H1600/130/4 profile trolley, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cuttings. 12 pairs of storage arms welded to each column, 2 central columns adjustable, clear spacing between storage arms 130 mm, depth of storage arms on each side 400 mm, arms covered with felt, with 4 plastic castors, diameter 150 mm, 2 of which have locking devices. Pos. 2.0 – Article 10776000 1 piece RU-MSTR assembly station for frame fitting components, 3000 mm long, width 600 mm. 1 shelf for hardware parts, 1 support table covered with felt, working height adjustable between 900 – 1100 mm (without screwing units). Pos. 2.1 – Article 6747 1 piece running rail with carriage, 3000 mm long. Pos. 2.2 – Article 6308 1 piece balancer for equipment 3 to 5.5 kg. Pos. 2.3 – Article 10778000 1 piece RU-STS-A inline screwdriver with automatic screw feeding system POWASERT, consisting of inline screwdriver and feeder unit ADS-MF4, complete with hose connections. Inline screwdriver ADS 2445 RD with torque shutoff. Set up for the screw feeding used by the customer. Suitable for the following screw dimensions: Shaft diameter: 2.4 – 4.0 mm Shaft length: 10 – 35 mm Head diameter: 5 – 8 mm When ordering, information about the screw must be provided to the manufacturer at the factory. Pos. 3.0 – Article 10782000 1 piece RU-EW-2S storage trolley, double-sided, max. storage capacity 36 sash frames screwed in an L-shape, length 1200 mm, depth 800 mm, height 2200 mm, support rails covered with felt, 4 castors, 2 of which have stoppers. Pos. 4.0 – Article 10766000 1 piece RU-DR-1 rotary table with mobility unit for frame assembly. Table with parking brake. Support platform with cross beams and one extension to the left and right, each with felt pad. Base dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, working height adjustable 900 – 1100 mm. Pos. 4.1 – Article 5360-01 1 piece fixed tool tray, 1000 x 400 mm for RU-DR-1. Pos. 4.2 – Article 6354 1 piece 3-meter double guide rail for mobility unit, rail height 10 mm. Pos. 4.3 – Article 6454 1 piece mobility unit with flanged track wheels and parking brake. Pos. 4.4 – Article 6788 1 piece corner screw device. 1 pair of pneumatically height-adjustable clamping units for securing profiles at right angles. Crodsytx Ulspfx Am Rec Pos. 5.0 – Article 10383000 1 piece RU-DK-T14/34 tilt-turn table with pneumatic tilt system. Working platform with 4 support bars, base dimensions 1400 x 1500 mm, extended 3400 x 2300 mm. Tabletop covered with felt. Tilting table height adjustable from 900 – 950 mm. 2 folding and sliding support plates installed.

Condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench -Torque module: for mounting water meters or other screw connections -Frequency converter: from Yaskawa type VARISPEED 616G5 -Mounting device: for water clocks -Speed and torque: adjustable -various Recordings: for water clocks -Dimensions: 1500/650/H2060 mm -Weight: 314 kg -The two geared motors each have a power: of 1.5 kW and a speed of 38 rpm Credpocm I T Tjfx Am Rec -Dimensions: 880/600/H920 mm -Weight: 132 kg

Year of construction: 2006, condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, Credpfx Amjfw Rwms Rjc -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Condition: good (used), Assembly station, assembly device, vacuum assembly device -Manufacturer: reis, mounting station with suction cup holder -Control: Siemens simatic -Suction cups: 6x Ø 165 mm -Platform: stroke 300 mm -Previous use: Production of solar panels -Individual components: see photos -Number: 2x mounting device available -Price per piece -Dimensions: 2620/1860/H1210 mm -Weight: 2000 kg/pc. Credjtrzplopfx Am Rsc

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Cedpfxou D E A Dj Am Rerc Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Csdpjihiiisfx Am Rerc Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Rotox sash assembly table, year of manufacture 2007; automatic screw feeding, adjustable screwdriver height, corner bearing drilling unit, fittings shelf Credeyr Arxopfx Am Roc

Condition: like new (used), functionality: fully functional, machine/vehicle number: C-13-309, overall weight: 900 kg, Take the opportunity to acquire a high-quality used Carat grinding and polishing station: This set consists of a control cabinet and two precise polishing machines, equipped with robotic interface for maximum efficiency. Ideal for professional industrial applications. Suitable robots can be offered separately. • Year of manufacture: 05/2013 • Total height: 240 cm Cjdpfx Amjuzylhe Rerc • Operating pressure / max. air pressure: 6 bar • Operating voltage / frequency: 400 V / 50 Hz • Rated current: 11.5 A • Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the Crsdex H Al Ajpfx Am Rsc increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet ----- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: new, DOPAG Micromix Crjdsxcgpzjpfx Am Rsc The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled.

Condition: used, used, good conditionsupport surface 1350 mm x 1600 mmwidth max. 2900 mm extendable- hinged 90°tilting device pneumaticclamping cylinder for workpiece clamping 2 piecesmobilestorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as viewed,without guarantee and warranty Crjdpfsvwfxnex Am Roc

Condition: new, Just the right thing for flexible operations. Our small lifting table Pegasus is very maneuverable, versatile and thanks to thefoot pedal easily adjustable to their ideal working stable sheet metal plate allows you to easily deposit evenup to 300kg heavy workpieces. If they need another plate, they can also put on the very simple.4 stable polyamide castors, two of them with locking brake, provide ideal handling. A safety device against sagging of thetable gives them the necessary sense of ner bench made of solid beech with dovetail zinc coating represents the strongest connection that ensures maximum stability andlongevity of the planer bench. The front collet is 520 x 70 rear collet is equipped with a special spindle that guarantees the completely precise and stable guidance of the collet. On the rear tong there are 3 holes for bench hooks and another 13 holes are drilled in the planer bench plate. The 110 mm high front side is provided with 2 bench hook holes, which together with 2 holes in the rear tong can be used forvertical clamping of workpieces. Part of the planer bench is the drawer for storageof tools. Along the rear part of the planer bench is the hatchet tray, which can be used as a shelf, for the currently unusedtools and material remains or for quick hnical data:Lifting table:Load capacity: 300 kgUseful stroke: 610 mmOverall height: 400 mmFrame: 970 x 590 mmGes. Height: 1010 mmWeight: 85 kgWorkbench:Overall length: 1,700 mmWorktop length: 1,485 mmOverall width: 790 mmWorktop width: 620 mmWorktop thickness: 50 mmWeight: 90 kg Crsdpfjvwfi Tsx Am Rec

Condition: used, Vacuum with pump and 3 suction platesused, good conditionmake Schmalztype PVT-3-SPL-300x100-VE SEG 4vacuum generator ejector SEGoperating pressure 5 barload capacity approx. 90 kgadjustablewith vacuum pump pneumaticsuction plates 3 piecessize 300 mm x 100 mmswivelingspace requirement approx. 1200 mm x 600 mm x 900 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Crodpfxevwf D Ro Am Rec

Condition: excellent (used), Year of construction: 2019, 2-axis positioner - BEAR RT series Robot - Kawasaki BA006L from the year 2019 Power source - Fronius TPS 400i from the year 2019 Robot and positioner in very good technical and visual condition - as shown in the photos. In continuous operation. Cjdpomu Agpsfx Am Rjrc

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Crjdoh Akm Tepfx Am Rjc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Our former assembly cell was only in operation for a few hundred hours (the exact number is unknown) and is no longer needed, as the conversion to our new product is not worthwhile for us. The condition of all devices is very good due to the low usage - apart from the batteries, which need to be replaced. The entire assembly/robot cell has the following dimensions: height: 169cm, width: 175cm (150cm + 25cm), depth: 130cm, weight: approx. 600 kg The most important elements of the assembly/robot cell are as follows: Mitsubishi robot mod. RH-6SH5520-S312, year of manufacture 2010 Crsdpfxsri S Hko Am Rsc Mitsubishi Teaching Box Mod. R56TB, year of manufacture 2010 2x ETIPACK labeling device Mod. CLEAR13, year of manufacture 2010 Many details are visible in the photos and in the documents, for everything else we are happy to provide information.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0385, The “OSV S400G” mixing and casting machine for PUR foam gaskets. Designed for manufacturing of injection molding products from two-component polyurethane systems with their application along a given trajectory, for example electrical cabinets doors. Csdpfx Amoyzhbro Rjrc

Condition: new, Year of construction: 2026, Assembly robot BEFARD XGR 800.3 Specification: * full remote control - both operation and drive of the device * three hydraulic extensions with a vertical range of 5.55 m * power supply by a combustion engine (optional additional power supply by a 230 V electric engine or Li-ion batteries) * possibility of simultaneous operation from the 230 V mains and battery charging (for the Li-ion version) * two-circuit vacuum system * maximum lifting capacity 800 kg * 8 vacuum suction cups * rotating frame with suction cups (hydraulically) - controlled by the remote control * lateral shift of the frame with suction cups (right, left 10 cm - hydraulically) * tilting frame with suction cups to the sides (relative to the device - manually or hydraulically) * tilting frame with suction cups (possibility of lifting the element from the horizontal plane and verticalizing it - hydraulically) * non-marking tracks Crsdoibqr Tepfx Am Roc * two working modes - fast and slow * color to choose from Optional additional equipment: * HS spacers * valves * frame tilt with suction cups (hydraulic - remote control) * forks * anti-overload system * hook * LED lamp * 230V wired power supply (for the combustion version). Other models available: XGR800.1 with one hydraulic extension, with a vertical reach of 3.9m XGR800.2 with two hydraulic extensions, with a vertical reach of 4.75m Gasoline engine - VANGUARD brand 10 HP / 5.5 KW

Condition: used, Year of construction: 2019, functionality: fully functional, 400 kVA transformer station, year of manufacture 2019, station UK220-2.9X, transformer DOTUL400/10, year 2013, oil-cooled transformer, 10kV ±2x2.5%/400V, with HV plug-in bushings AK, with LV porcelain bushings, pointer thermometer. Cjdpexzq Hbsfx Am Rsrc