Used Ring Gear Vernier Caliper for sale (10,156)

Condition: good (used), Vernier caliper, vernier caliper, vernier caliper -Manufacturer: CSE, tooth width caliper sprocket caliper with fine adjustment -Measurement scale: mm Pgjdpfx Aok Hdr Nokiou -Vernier: on both sides -Dimensions case: 175/155/H30 mm -Weight.: 0.5 kg

Year of construction: 1998, operating hours: 2,010 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 95/A/8419, We offer this refurbished Gearing & Watson V617 electrodynamic vibrator, manufactured in 1998. Model: V617 Maximum sinusoidal force: 4.6 kN Maximum random force: 4 kN Maximum shock force: 4.6 kN Maximum acceleration: 70 g Maximum velocity: 1.5 m/s Pjdpfe Adtggox Akiegu Maximum displacement (peak-to-peak): 51 mm Frequency range: 5–3000 Hz Coil diameter: 174.5 mm Moving mass: 10 kg Maximum payload: 120 kg Coil resonance frequency: 2200 Hz Magnetic field: 5 mT Electrical power (400 V three-phase): 11.4 kVA Cooling: air-cooled Total weight: 850 kg Dimensions (L × W × H): 1400 × 600 × 910 mm If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), MEASURING CALIPER / SLIDE CALIPER / NEW - UNUSED SMW 3000x500mm Pgjdpfx Ajztfk Sjkiju Measuring length approx. 3000mm Jaw length approx. 500mm Pyddl Vernier scale 1/20mm according to factory standard Scale and slide made of aluminum profile Measuring jaws made of steel - rustproof, hardened Glare-free reading Weight approx. 3.8 kg incl. transport case Errors and omissions excepted.

Condition: as good as new (ex-display), Caliper / Measuring length 4 meters / New - Unused -SMV 4000mmx500mm -Measuring length: 4 meters -Jaw length: 500mm -Vernier 1/20mm according to factory standard -Scale / caliper made of aluminum -Jaws / tips made of hardened stainless steel -Glare-free reading -Weight approx. 6 kg -Incl. wooden transport case Errors and input mistakes excepted. Pgedpfx Aoy R S Ibokiju

Condition: excellent (used), Two digital calipers Digital caliper Mitutoyo 551-231-10, measuring range 300mm Podpfsw Tctrox Akisgu Digital caliper Mitutoyo 500-181-U, measuring range 150mm The batteries have been replaced or are in good condition. The measuring tools can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this supplier".

Condition: used, mileage: 649,011 km, power: 309 kW (420.12 HP), first registration: 08/2003, fuel type: diesel, axle configuration: 6x4, wheelbase: 4,660 mm, fuel: diesel, brakes: retarder, color: yellow, driver cabin: day cab, emission class: euro3, total length: 6,900 mm, total width: 2,540 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Equipment: ABS, electric window regulation, power assisted steering, retarder, = Additional options and accessories = - Air horn - Hub Reduction - Immobilizer - Radio CD player - Speed limiter - Sper = More information = General information Year of construction: 2003 Registration number: BN-VS-71 Pgodpfx Akoz Spp Uoieu Technical information Number of cylinders: 6 Axle configuration Max. front axle load: 7500 kg Rear axle 1: Max. axle load: 9500 kg Rear axle 2: Max. axle load: 9500 kg Weights Empty weight: 9.490 kg Carrying capacity: 17.010 kg GVW: 26.500 kg Max. towing weight: 50.000 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Herringbone Gear Generator MDV 2000 Pgodjfx Ibnspfx Akiju MDV 2000 Characteristics: Max. wheel diameter: 2000 mm Min. wheel diameter: 50 mm Max. module: 12 Min. module: 3

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 115,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The ZFWZ 5000 originates from Modul's Chemnitz gear machining division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that houses the Modul drawing archive. Proven kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. The machine mills external gears, both straight-toothed and helical, up to a module of 40 in hobbing and up to a module of 50 in single-indexing. With the internal milling attachment, internal gears are produced for gear rings of large roller bearings, rotary couplings, and planetary hollow gears, as used in wind power, mining, crane, and shipbuilding technology. Workpieces up to 5000 mm in diameter can be accommodated on the 4000 mm table, the milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for roughing with high chip volume as well as finishing with precision. Pgodpsz Etmpefx Akisu Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance from milling spindle axis to table axis 300–1800 mm, distance from milling spindle axis to table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full availability of spare parts and support, in an air-conditioned switch cabinet of our own manufacture. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. The geometry acceptance is carried out according to the manufacturer's standard or DIN, with a protocol, jointly with you in Chemnitz. The scope of delivery also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: good (used), power: 257 kW (349.42 HP), first registration: 12/2005, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: blue, gearing type: mechanical, suspension: steel, total length: 9,900 mm, total width: 2,500 mm, total height: 3,400 mm, loading space length: 6,700 mm, loading space width: 2,500 mm, loading space height: 1,360 mm, Year of construction: 2005, Equipment: EBS, differential lock, electric window regulation, power assisted steering, power mirror, trailer coupling, = Additional options and accessories = Podpfez R Ubbjx Akisgu - Leaf spring suspension - Differential lock - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Tow hitch = Additional information = Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 1: Dual tires; Differential lock; Tire tread depth left (inside): 70%; Tire tread depth left (outside): 70%; Tire tread depth right (inside): 70%; Tire tread depth right (outside): 70%; Reduction gear: External planetary axles Rear axle 2: Dual tires; Differential lock; Tire tread depth left (inside): 50%; Tire tread depth left (outside): 50%; Tire tread depth right (inside): 50%; Tire tread depth right (outside): 50%; Reduction gear: External planetary axles Number of cylinders: 6 Technical condition: good Optical condition: good

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions Pedpew Dgi Tjfx Akiegu - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: excellent (used), The Gleason BGT 200 H-W universal bevel gear testing machine is used for roll-off, load capacity, and run-out testing, as well as for measuring backlash on the flank, installation dimensions, and sensitivity to displacement in bevel gears with and without axial offset and axial angles from 0° to 180°. Gear sets with a maximum ring gear diameter of up to D=190.5 mm and hypoid gear sets with a pinion offset of 31.75 mm above and below the center can be tested. This testing machine is ideally suited for testing gear sets with small diameters and small modules under low load and with a minimum of backlash. The digital actual value display facilitates quick and precise adjustment and reading of the pinion installation dimension, ring gear installation dimension, and axial offset. The motorized drive of the pinion spindle, in conjunction with the frequency converter, allows for stepless adjustment of the pinion speed in the range of 0 to 3,000 [rpm]. The work area is secured by an electrically interlocked safety device. Technical data Largest gear diameter 190.5 mm Largest axial offset (hypoid offset) above (+) and below (-) the center ± 31.75 mm Largest / smallest distance from the machine center to the spindle nose, ring gear 177.8 / 0 mm Largest / smallest distance from the machine center to the spindle nose, pinion 177.8 / 25.4 mm Smallest / largest axial angle (steplessly adjustable) 0 to 180 ° Pinion and gear spindle: Diameter at the large end 45.65 mm Taper 1 : 24 Length of the taper 76.20 mm Diameter of the spindle bore, throughout 33.33 mm Speed range of the pinion spindle (steplessly adjustable) 0 to 3,000 rpm Weight 1,050 kg Dimensions L x W x H 500 x 1,100 x 2,000 mm Pgedpfj Afi Atox Akisu

Condition: used, Technical details: measuring range X-axis: 3000 mm indexing: 0,1 mm weight: variable kg No. 1 Caliper/caliper gauge made of stainless and hardened steel Pgedpfou N Atwex Akisu Make INOX Measuring range 0 - 3000mm Reading 0.05mm via vernier Leg length approx. 280mm without measuring tips for internal measurement No. 2 Caliper/caliper gauge made of stainless and hardened steel Make Massi according to TGL Measuring range 2000mm Reading 0.1mm via vernier *

Condition: excellent (used), functionality: fully functional, from a large DEMAG stock with numerous gearboxes Pjdpfx Akjv T Ti Teisgu GEARBOX SET Part Number 82452533 DH1000 3-speed, i=112.3 3 DEMAG gearboxes DH1000 in top condition, like new Original price per unit: €23,135.06 net, now €16,900.00 net per unit 4 Plug-in shafts / coupling shafts DH1000H16, Part No. 82417633, new. Original price per unit: €1,796.76 net, now €1,290.00 net per unit Thousands of DEMAG spare parts in stock Free shipping within Germany! Information: over 30,000 DEMAG spare parts and components in stock! Demag crane parts warehouse

Condition: used, machine/vehicle number: 420285, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Pgodpfx Aks Aa A Sqsiju Machine type: Universal tool milling machine Travel distances X-axis travel: 1,120 mm Y-axis travel: 420 mm Z-axis travel: 620 mm Spindle and tool holder Spindle taper: SK 40 Spindle speed range: 30–2,000 min⁻¹ Work table Table length: 1,600 mm Table width: 400 mm EQUIPMENT Programmable WIZARD digital display Operating manual Lubrication chart Electrical wiring diagrams Hydraulic diagram

Condition: used, Fixed Bed Milling Machine VERNIER DB 420 Pedjzw A Dwopfx Akiegu Travel X: 1200 mm Travel Y: 420 mm Travel Z: 600 mm Command HEIDENHAIN Spindle SA40 Spindle speed: from 40 to 2000 RPM Table size: 1600 x 400 mm Horizontal + vertical tilt head Spindle motor: 7,5 KW Feeds: auto X - Y - Z Voltage: 380 V Width with ends table: 2700 mm Depth: 2500 mm Total height: 2200 mm Weight: approx 4,5 T

Condition: used, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Year of manufacture: 1990 Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC Pgodpjzy E Taefx Akiou - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Psdpfx Aswvbqijkiegu Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Condition: good (used), Year of construction: 1957, functionality: fully functional, total length: 3,000 mm, total height: 2,600 mm, total width: 2,500 mm, overall weight: 6,000 kg, cutting height (max.): 400 mm, Gear hobbing machine, manufacturer: LIEBHERR, type: L 300, year of manufacture: 1958, max. workpiece diameter: approx. 300 mm, spindle: MK4, Pgjdps Aapgzefx Akiou net price €16,000 (negotiable)

Condition: used, color: other, Year of manufacture: Apr 2016 Pjdpfxjy Hrhyo Akijgu Year of construction: 2016 VERY NICE GOOD WORKING MODERN TERMINAL TRACTOR.

Condition: good (used), Thread gauge ring, thread gauge ring, go gauge ring, reject gauge ring -Threaded training rings: 11 good training rings -Thread sizes: M12 to M55 -Nominal dimensions: see photos -Submission/Price: complete Psdpfx Ao Abak Hokiogu -Transport dimensions: 100/100/H160 mm -Weight: 3.3 kg

Condition: excellent (used), Year of construction: 1974, I am selling this machine. It can be tested when connected. Maximum module 25 mm Maximum gear diameter 500 mm Pjdpfx Aev Nqq Tjkiogu Maximum machining length 3,000 mm Maximum table load 4,000 kg Maximum cutter diameter 250 mm Maximum cutter length 300 mm Total power 25 kW Machine height 2,100 mm Machine length 7,600 mm Machine width 2,800 mm Machine weight 27.1 t You can send a video of the machine via whatsapp.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Max. diameter = 450 mm and module = 10 Pgjdpfez Rm Hzjx Akieu Min. diameter = 69 mm and module = 0.9

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters -1 pallet / Clamping arbors DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm Pgodpfx Aezv Ed Dskieu -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted.

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 80 [mm] - Z-axis travel : 220 [mm] - Max module : 2.5 - Max workpiece-holding spindle speed : 3000 [rpm] - Max dimensions of the hob (diameter x length) : 118 X 120 [mm] - Speed of the hob-holding spindle : 200-5000 [rpm] - Shifting travel : 140 [mm] Pjdo Ad Rwcepfx Akisgu - Angular travel of hob-holding headstock : -45/+115 [°] - Machine floor space : 2700/2180 [mm] - Machine height : 2310 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840D PowerLine - Loading manipulator

Condition: excellent (used), functionality: fully functional, Various accessories for a Reishauer NRK thread grinding machine Original – change gear box with stand, containing 50 ground change gears in the original wooden box 26 loose change gears, including 2x Z=63, 2x Z=64, and 1x Z=72, original all gears with ground teeth Pgsdpfx Ajza Dk Sokiju Grinding machine accessories: 2 adjustable steady rests 66189-2 + 66189-3 / setting blocks (1x incomplete) 9 new grinding wheel flanges various new and unused grinding wheels Balancing mandrel Thread rolling device, including rolling device and lead curve Roller grinding device various cam disks/cam curves Grinding device, manufacturer Landert Motoren various oil nozzles unused strip curtain/splash guard Price / details on request All technical specifications are subject to printing errors and changes. We only sell to countries within the European Community.