Used Reber Saystematic Gmbh+Co.kg Resy Kbf 1001/1500 Rf for sale (72,321)

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, volume flow: 90 m³/h, total width: 2,950 mm, total length: 3,800 mm, total height: 2,300 mm, energy consumption: 1 kWh, Innovative Band Filter Technology for Maximum Process Reliability The RESY KBF Compact Band Filter System represents a groundbreaking advancement in the field of automatic band filter units. A key advantage: There is no relative movement between the conveyor belt, filter fleece, disc wheels, and sludge scrapers. As a result, the filter fleece remains undamaged even with large amounts of chips or dirt particles. Compared to conventional flatbed filters, the compact band filter offers: down to 80% less space required higher level of purity consistent filtration performance reduced maintenance intervals maximum process stability Operating Principle of the Compact Band Filter A robust, endless metal hinge belt is guided in a semi-shell shape over two rotating disc wheels and driven by a geared motor. The filter fleece is positioned between the belt and the wheels. The contaminated medium is introduced via a central inlet pipe directly into the fully sealed filtration tank. In the calm zone, solid particles settle and form a filter cake. This filter cake acts as an additional natural filtering layer, continuously improving separation performance. Nedpey Evxyjfx Aaaewf As contamination increases, the liquid level rises — depending on design, up to 500 mm. When a preset maximum value is reached, the system automatically feeds in fresh filter fleece without interrupting the filtration process. Simultaneously, the following are reliably discharged: used fleece sludge chips gross particles An integrated sensor continuously monitors the diameter of the fleece roll and signals in good time when the roll needs to be replaced. The entire filtration process operates fully automatically and energy-efficiently. Custom Configuration for Your Application The actual filtration performance depends on various process parameters, including: flow rate medium (e.g., emulsion, oil, process water) inlet concentration desired filtration fineness particle size and material characteristics The compact band filter is configured individually based on your technical requirements. Typical Application Areas metalworking grinding processes turning and milling operations coolant preparation process water purification chip and sludge filtration

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Nwedodtq Anspfx Aaaef

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 410798, type of input current: three-phase, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine designed for flexible and efficient production of shipping and protective packaging from continuous corrugated board – ideal for companies with a wide range of small batch series or on-demand production. Its patented multi-tool system allows for creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools 6× multifunction tools for longitudinal processing 1× multifunction tool for transversal processing Creases are applied gently using creasing skids – reduces carton cracking Perforation via oscillating cutting knife, intensity adjustable Cutting with a serrated knife on a rubberized roller → low-fiber, tactile cut edge ⚙ Drive & Mechanics Maintenance-free, high-dynamic linear drives for precise feed Segmented top pressure for reliable carton feed 2 rubberized rollers as counter-cut and transport medium 📐 Technical Specifications Max. working width: 1,500 mm Min. working length: 380 mm Board thickness: min. 1.5 mm (E-flute 1.3) max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feed (Feed Stand) Max. stack height: 2,100 mm + 120 mm pallet Max. feed rate: 100 m/min Min. web width: 300 mm Max. web width (VPS 1500): 1,500 mm Total width "side by side": max. 1,350 mm 💻 Control & Software Hardware BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) 16 GB RAM, 240 GB SSD Windows 10 IoT Enterprise 21" multi-touch panel Control cabinet integrated into base machine Software features Multi-stage cut optimization Dynamic tool management Bidirectional multi-line processing User management (user, service, admin, Kraft) Comprehensive production, carton, and design management Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation Operating manual in local language Circuit diagrams in German or English Spare parts drawings Other Equipment Standard interface for barcode scanner, file import (XML), database import Control panel mounted on swing arm, left side 🔄 Setup Times & Performance Nwedpfxox Emguj Aaajf Changeover time with automatic carton changer: approx. 4.5 seconds Tool repositioning only: approx. 2.5 seconds The machine is delivered with multiple FEFCO formats and is production-ready immediately (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture Demo and test machine year of manufacture 2019 Single-shift operation since 2022 Dismantling, packaging and delivery handled by seller Unloading requires 3.5-ton forklift with long forks 🎨 Colour Scheme Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) Safety fence: RAL 7015 Safety fence posts: RAL 7035 💡 Key Advantages of this Machine Very short setup times → ideal for flexible packaging production Low-fiber cut edges → reduced risk of injury & improved appearance Intuitive user interface Fully automatic, high-precision operation Immediately ready for use with included design templates Low-maintenance linear drives High process stability due to segmented top pressure

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nedjyz Af Espfx Aaajwf Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, We are offering this display machine SM Innotech Laminator Incapcell 35-18, year of manufacture 2018. Manufacturer: SM Innotech GmbH & Co.KG Nodsy Druuopfx Aaajwf Model: Incapcell 35-18 Year of manufacture: 2018 Condition: Display machine Category ID: 33 Machine type: Laminator There are 2 units of this system available; both are new as they have never been used. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2019, condition: used, We are offering this used SM Innotech GmbH & Co.KG Incapcell 22-18 laminator, year of manufacture 2019. The system has very low operating hours, as it was used as a test machine for trial purposes. Individual software updates or other modifications can be provided according to requirements and at additional cost. The system is available for immediate delivery. Nsdpfxjy Dq D Io Aaaewf If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, operating hours: 9,500 h, functionality: fully functional, machine/vehicle number: 3284, Standard version of RUF Lignum R2 with outfeed channels, el.motor 22 kW, briquette sizes 150x60 mm capacity up 500 kg/h Nwsdpfx Aeyyl Sroaasf

Condition: reconditioned (used), Horizontal Press Baler DIXI 60 SLD Year of manufacture: 2014 Semi-automatic 60-ton baling system for economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard boxes Tetra packaging Foils PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Feed opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of bindings: 3, with wire with quick release eyelets Njdpfxsnfux Ue Aaaswf Drive power: 7.5 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation.

Condition: reconditioned (used), power: 11 kW (14.96 HP), operation weight: 8,000 kg, Horizontal baler DIXI 80 SLD 2018-2021 Year of construction Semi-automatic 80-tonne baling system for the economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard packaging Tetra packaging Films PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4,320 x 1830 x 2,154 mm Filling opening W x H (standard) mm: 1,040 x 1,110 mm Machine weight approx. kg: 8,000 Press force max. kN: 80 t / 800 kN Ironing cycle (average value) approx. s: 35 Bale size W x H x L approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Binding: manual Nwjdpoqa Dq Dofx Aaaof Number of bindings: 4, with wire with Quicklink wire Drive power: 11 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation. The operating instructions are available and are supplied as a PDF file and in paper form.

Condition: new, Year of construction: 2025, Blasting container for blasting glass beads and ceramic balls with drum magnetic separator and stainless steel grating floor. Inner dimensions L=5850 W= 2300. Side Door Open for easy loading with the forklift. Nodeg S Rt Tepfx Aaaowf

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Fully automatic machine with pneumatic control and PLC system for the production of small diameter rolls Specification: Wrapping material: parchment, cooking paper Paper thickness: 10 - 70 g/m2 Speed: 500 rolls of 15 m / hour Working width: 200 mm - 420 mm Main roll of maximum diameter: 1000 mm The maximum diameter of the finished roll: 60 mm Electrical connection: 400 V, 50 Hz Power consumption: 6 kVA Nwjdpfx Aaov Dutueajf Air consumption: 200-400 l/min at 6 bar Weight: 1200 kg

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 9332067, ROLLER CONVEYOR - CONSTRUCTION BLASTING SYSTEM MANUFACTURER: RUMP TYPE: 20-W 1500-4 Manufacturer: Rump Type: 20W-1500-4 Year of manufacture: 2012 Njdey Entispfx Aaaewf Please refer to the technical drawing for dimensions, as well as for the operating hours. Including filter unit, sound insulation, control cabinet, complete documentation, etc. TOP CONDITION This is a ready-to-use, pre-owned machine. Sale is made without warranty and without guarantee. Subject to prior sale and errors.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Length 1.50 m - Nsdpfx Aech Iv Nsaaowf PLC-controlled Formats up to B4 Various distances between carriers possible Preset counter, total counter Control via reading possible (e.g., bundle change)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, lifting height: 3,300 mm, mast type: duplex, gearing type: hydrostat, battery voltage: 24 V, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Nwodpfjw Izrcjx Aaaof Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: used, Year of construction: 2004, Technical details: voltage: 400 V / Hz total power requirement: 0,37 kW dimension machine xH: L:2,7 x B: 0,7 x H: 2,0 m Scraper belt conveyor combined with cooling water system and torque shut-off Discharge length D=280mm Chip infeed width F=325mm Insertion height B=approx. 160mm Insertion height B+I=220mm Chip infeed width F1=300mm Chip infeed length=700mm Floor clearance I=60mm Discharge height above floor C+I=950mm Equipment 2x support feet * Nwedpfx Aov N Ekbeaasf

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Nwsdpju Ibuwsfx Aaajf Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Njdpfx Aouqc Ivjaajwf Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Year of construction: 2022, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Nwsdpfech Hcasx Aaaef Infinitely variable speed Height adjustable also available with other lengths Inkjet base

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Nwedpsu Tha Iofx Aaajf Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Nwodpfxou Thh Ej Aaaef Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks Nwodpfx Aasx A U Ncsaef • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Nedpfx Ajhx Elfjaaowf Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: new, Year of construction: 2025, Abrasive Media Preparation 1x Sweeping Pit 1x Bucket Elevator 1x Air Separator 1x Electric Vibrating Sieve 1x Abrasive Media Hopper 1x 200l Pressure Blast Unit 1x Blast Hose, Blast Nozzle, Deadman Switch, Control Line 1x Control Cabinet Optional Accessories: - Cross Conveyor Screw over the entire blast room width (also serves as additional buffer storage for several hours of blasting) - Extension for 2 abrasive media types, ferritic and mineral - Drum Magnetic Separator Nwjdpfsw Ivvcsx Aaaof - Final Demagnetizing Stage - Magnetic Drawer

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter Nedpfx Aajw Ivk Tsaowf 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 15,000 mm, inner dimension height: 5,000 mm, filter area: 352 m², volume flow: 22 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. Njdpsu Hy Tpjfx Aaajwf For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction