Used Proval Pa125Da With Complete Control Equipment for sale (74,634)

Condition: new, For sale: Professional Proval PA125DA pneumatic actuator with complete control equipment. The set includes a pneumatic actuator, IMI Herion solenoid valve, and J J limit switch box in ATEX version. The device comes from warehouse stock, in brand new and unused condition. Technical Data: Manufacturer: Proval Nedpfx Akjz Slr Teiswn Model: PA125DA Type: Double-acting pneumatic actuator Rotation angle: 90 degrees Operating pressure: 2 to 8 bar Connection: G 1/4 Temperature range: minus 20 to plus 80 °C Standard: ISO F07, F10 Equipment: IMI Herion solenoid valve 230V 50Hz J J ATEX IP67 limit switch box Complete set ready for installation Condition: New, warehouse stock Possible minor storage marks Price per piece

Condition: ready for operation (used), ALFA LAVAL VELVES COMPLETE PROCESSING SMART UNIT WITH CONTROLL BOX YOM 2015 30 VELVES IN COMPLETE EXCELLENT CONDITION Nwjdpfsz Hwhtjx Akisn The unit is designed for the automatic safe separation of product flows, the management of different product streams, and the safe cleaning of one line without halting production on the other.

Condition: good (used), Year of construction: 2011, • Wohlenberg WB 92 TS cutting machine • Approx. 920 mm cutting width • Programmable control • Large stainless-steel work tables • Side tables • Waste/trim removal system • Conveyor system • Baumann material handling equipment • Baumann unloading equipment • Baumann jogging equipment • 4 cutting knives included The waste disposal/conveyor equipment is stated to date from approximately 2017. _____ Nwodpfxsz Ei D Do Akien BAUMANN PERIPHERAL EQUIPMENT The cutting system is complemented by professional Baumann handling equipment. Baumann Unit – Type BA 3N According to the machine plate: • Manufacturer: Heinrich Baumann • Type: BA 3N • Machine No.: 1322 • Voltage: 400 V / 3N~ • Frequency: 50 Hz • Rated current: 9 A • Power: 3 kW • Stated load: 1,000 N • Made in Germany The exact year is not shown on the visible nameplate. Unloading Equipment The owner states that the unloading unit is approximately 10 years older than the main cutting machine. Jogging Table The owner states that the Baumann jogging equipment is approximately 20 years older than the main cutting machine. These age indications are based on information supplied by the machine owner and should therefore be considered approximate. _____ INCLUDED TOOLING A particularly useful part of the package is the knife set: 4 x cutting knives included This reduces the buyer's initial need for additional cutting tools and provides spare knife capacity for ongoing production. _____ WHY BUY THIS CUTTING LINE? Complete Production Package Instead of purchasing only a stand-alone guillotine, the buyer receives a complete cutting and material-handling solution with peripheral equipment. Proven German Technology Baumann and Wohlenberg equipment is widely used in professional printing and finishing operations and is known for its robust mechanical construction. 920 mm Production Class The 92 cm cutting format is highly versatile and suitable for a wide range of commercial printing, digital printing, bookbinding and finishing applications. Material Handling Included The additional Baumann equipment can significantly improve workflow compared with operating a stand-alone cutting machine. Waste Handling & Conveyors Integrated peripheral systems help reduce manual handling around the cutting process and improve production organization. Four Knives Included _____ SUITABLE APPLICATIONS The system can be used for: • Commercial print finishing • Digital print finishing • Bookbinding • Brochures and catalogues • Sheet cutting • Printed paper • Cardboard and light board applications • Short- and medium-run finishing • General post-press production _____ FGT VALUE – MORE THAN JUST A MACHINE Purchasing used graphic machinery internationally involves more than simply buying equipment. FGT Graphic Machinery can support the complete project from inspection through delivery. Our services can include: • Technical machine evaluation • Inspection coordination • Machine demonstration • Professional dismantling • Preparation for transport • Packing • Loading • International truck transport • Sea freight • Export documentation • Customs preparation • Installation coordination • Technical support _____

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. - Robot: M-1iA/0.5A - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration. Nedpfx Ajzzpuwokiswn

Condition: used, Year of construction: 2018, REF: MM6441 Njdpfjza T Slex Akiswn Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Year of construction: 2010, condition: ready for operation (used), Side table with air Nwedjz Aah Ropfx Akien Chrome table Data numeric control is installed 2008 from Perfecta and completely overhauled Available immediately 3 knives

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale Nsdpfx Aszqur Hjkiown We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: Nsdpfsz Nyv Tex Akiswn * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 30 kg, arm reach: 650 mm, pivoting range: 360 °, teach pendant manufacturer: Fanuc, Fanuc SR6IA-30P-C-CENR Robot complete with Controller. 8+ units available from October 2026 Robots were installed in an IMA line that was created for a special project but never commissioned. So even though the robots have been installed in the line, they were never commissioned prior to the special project being terminated. Lines are still in their original crate from IMA. Nodpjzzplcofx Akiswn FANUC SR-6iA - Type: SCARA - Axes: 4 — J1, J2, J3, J4 - Payload: 6 kg - Horizontal reach: 650 mm - J3 vertical stroke: 210 mm - J1 range: ±148° - J2 range: ±150° - J4: ±360° - Repeatability: approximately ±0.01 mm for J1/J2/J3 - Robot weight: 30 kg - Typical applications: pick & place, assembly, inspection and packaging - Controller: R-30iB Plus for the current configuration.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Nwedsz Nll Hspfx Akion Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.

Condition: good (used), Year of construction: 2019, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Nodpfxozp E Sbo Akiswn Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: used, total width: 600 mm, total length: 600 mm, total height: 800 mm, Year of manufacture: 2002 Colour: Grey Empty weight: 50 kg - Year: 2002 - Serial number: 97370 - Measurement equipment model: Tool presetter - Options: Digital readout - Transport dimensions: 600mm x 600mm x 800mm (l x w x h) - Transport weight [kg]: 50kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nwodpfx Aeyu Sl Hekisn Lukas van Rossum

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 5a. Rademaker Flour Sifter. Nwsdezvmy Hjpfx Akijn 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 REF: MM6471 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. Technical specification: Nwsdpfszn Rcisx Akisn ✅ Manufacturer - CERTUSS Dampfautomaten GmbH & Co. KG, Germany ✅ Model - Universal 600 TC FG/LPG. ✅ Serial number - 15716. ✅ Date of manufacture - 2021. ✅ Steam output - 600 kg/hour. ✅ Fuel - LPG (propane). ✅ Electrical supply - 3 x 415 V / 50 hz, 5.66 kVA, 16 A. ✅ Control - automatic, PLC. ✅ Run time - under 200 hours logged, according to the owner. Supplied with chemical dosing and blow-down vessel. Any further water treatment equipment is not confirmed. Located in Cullompton, Devon. Viewing by appointment. Buyer to remove.

Year of construction: 2020, condition: new, functionality: fully functional, This new brewery, still wrapped in plastic from the production factory, has been purchased in 2020 but was never installed after planning permission failed by the local government. So, it's a complete set, see details, alle brand new (!) but for a very attractive price. New it will be approx. 640K, this one is for 360.000€. All manuals etc available, as well as a plan for installation with support from manufacturer (separate billing). PLEASE NOTE: WE DO NOT SUPPLY VISA / WE DO NOT PROVIDE SPREAD PAYMENT. We are a brewery, not a trader nor manufacturer. Nwodpfxjzz Rbxo Akisn

Condition: used, 3D MICROMAC Type: microCUT laser marking system microCUT Enclosure IPG laser source Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60Hz Power consumption 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Setpoint tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Setpoint tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous Wavelength 1070nm Power 5kW Frequency 5 kHZ Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Nwodpozdqp Isfx Akisn Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Working pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: microCUT laser marking system Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: iTNC640, table width: 800 mm, table length: 2,700 mm, rotary table diameter: 700 mm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DEMONSTRATION MACHINE Nwsdpfx Ajz D Erujkion This 5-axis machining center enables the complete machining of long components without the need for re-clamping. It is designed to ensure a high degree of dynamics and speed, despite its high stability and rigidity. The cross slide, traveling column, and bed are made of a steel/welded construction. The large tool magazine, connected to the column, ensures short tool change times. The machining center, "made in Italy," is equipped exclusively with European quality components. Special equipment for the demonstration machine: Kessler milling spindle SK40, 60-position tool magazine, air through the spindle, flushing gun for cleaning the work area (including its own pump), Heidenhain TS460 wireless measuring probe (workpiece measurement), BLUM laser tool measurement, Heidenhain automatic kinematic control, rotating control panel, 25 bar internal coolant system, interface for KNOLL filter system, oil mist extraction Available for immediate delivery. While supplies last.

Condition: used, CNC lathe GILDEMEISTER, type GD 160 with Gildemeister - Fanuc Mate TS control - Power chuck BERG, Ø 200 mm - 12-station tool turret, VDI 40 - 6 tool holders VDI 40, installed Machine footprint with chip conveyor: L x W x H 4200 x 2200 x 2100 mm Weight: approx. 4 tons We are making room Nwsdpfx Asy T R Irjkisn Affordable machine – ideal for export

Condition: good (used), mileage: 883,277 km, power: 323 kW (439.16 HP), first registration: 10/2010, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Equipment: AdBlue, air conditioning, crane, cruise control, electric window regulation, fog lights, parking heater, power mirror, retarder, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - EPS (Electronic Stability Program) - Intarder - Tilting hydraulics - Air horn - Particulate filter - Radio/CD player - Sleeper cab - Side door - Auxiliary heater - Toolbox = Additional Information = General Information Year of manufacture: 2010 Axle Configuration Front axle: Steered; Suspension: Leaf spring suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 13,569 kg Payload: 12,431 kg GVW (Gross Vehicle Weight): 26,000 kg Functional Crane: Hiab 144 B-3, year of manufacture 2006, mounted at the rear of the chassis Condition Technical condition: good Optical condition: good Warranty Warranty: No liability for printing and typographical errors, changes, prior sale, and mistakes! Further Information Please contact Emad Al Shogran for further information. Vehicle number: 73 Renault Lander 430 / 6x2 / Leaf - Air / Hiab 144 b-3 With remote control / Complete unit / Euro 5 / Lift axle .: VF624CPD000002987 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Euro 5 Lift axle CRANE: Brand: Hiab Type: 144 B-3 Year: 2006 With remote control Nsdew Shpispfx Akijwn Length: 6.69m Width: 2.48m Trailer: Brand: Samro Serial No.: VK1CD18MHPEA00061 Registration Date: 22.10.2010 Unladen weight: 4000 KG Gross vehicle weight: 18,000KG 2 axles Length: 6.85m Width: 2.48m = Company Information = No liability for printing and typographical errors, changes, prior sale, and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. Nwodpfx Asykq D Hskien The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. Nwodpfjykq T Usx Akion The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2018, condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Njdjxv Dz Iopfx Akiewn Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Nwedpfxszzd Dme Akisn Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP Nsdpfox Dnilex Akijwn

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Njdji Akrkopfx Akiewn Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)