Used Project A & E Tragegriffapplikator for sale (90,046)

Year of construction: 2016, condition: like new (used), Ytron Vibration Mobile Stainless Steel Feeder Hopper Itjdpfx Acszp N Exehjk EX rated 11 2 D IP65, Atex Vibration motor Temperature probe Year 2016 As new condition Including control box

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: Isdpfxsyug Hxj Achstk "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI Itedsyug R Ropfx Achok controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Itsdpfx Aszrwhgjchok Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, Equipment: documentation/manual, 2021 Star SR32 JII Type A (15,000 hours) 4m FMB Turbo 3-36, Hydrajet UB20 High Pressure Coolant, LNS Swarf Conveyor, FireTrace Suppression, JBS Guide Bush System, Fully inspected & serviced, 30 Day Warranty # Star SR-32JII CNC Sliding Head Lathe Machine Hours: Approx. 15,000 hours Maximum Machining Diameter: Ø32 mm standard / Ø34 mm optional CNC Control: Fanuc 32i-B ## Machine Configuration * Twin-spindle CNC sliding head lathe * Main spindle and sub-spindle * Main and sub-spindle full C-axis control * Gang-type tooling system * Cross-working driven tooling * Back-working tooling * X1, Y1, Z1, C1, X2, Z2 and C2 controlled axes * Type B configuration additionally incorporates Y2 control on the back-working unit ## Main Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 7.5 kW continuous / 11 kW short-time rating * Maximum headstock stroke: 320 mm * Full C-axis contouring capability ## Sub-Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 3.7 kW continuous / 5.5 kW short-time rating * Full C-axis contouring capability * Maximum chucking diameter: Ø32 mm / Ø34 mm optional ## Main Tooling * 6 × turning tool positions * Tool size: 16 mm square * 5-spindle sleeve holder * Maximum drilling capacity: Ø13 mm * Maximum tapping capacity: M12 × P1.75 ## Cross-Working / Driven Tooling Iodpfjzuxfrex Achotk Configuration options include: * 3 × ER20 cross-milling positions + 2 cartridge-type positions * Or 6 × ER16 cross-milling positions * Maximum milling capacity: Ø10 mm * Maximum driven tapping capacity: M8 × P1.25 * Cross-milling spindle speed: 6,000 rpm * Cartridge-type driven tooling speed: up to 8,000 rpm * Driven-tool motor: 2.2 kW continuous / 3.0 kW short-time rating ## Back-Working * Maximum chucking diameter: Ø32 mm / Ø34 mm optional * Maximum front ejection length: 125 mm * Maximum projecting component length: 45 mm * Back-working tool positions: * 6 positions – Type A * 8 positions – Type B * Stationary drilling capacity: Ø13 mm * Driven drilling capacity: Ø8 mm * Stationary tapping capacity: M10 × P1.5 * Driven tapping capacity: M6 × P1.0 * Maximum back-working driven-tool speed: 6,000 rpm ## Rapid Traverse * X1 / X2 / Y1 / Z1 / Z2: 35 m/min * Y2: 24 m/min on applicable Type B machines ## Ancillary Equipment Included * 4 metre FMB Turbo 3-36 Magazine Bar Feeder * Hydrajet UB20 High-Pressure Coolant System * LNS Swarf Conveyor * FireTrace Automatic Fire Suppression System * JBS Guide Bush System ## Machine Condition & Support * Approx. 15,000 operating hours * Fully inspected and serviced * Supplied ready for production * 30 Day Warranty * Warranty valid within the UK only ## General Specification * Coolant tank capacity: 255 litres * Approximate machine dimensions: 2,690 × 1,345 × 1,780 mm * Approximate machine weight: 4,100 kg * Power requirement: 8.8 kVA * Maximum sound pressure level: 77 dB

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00. Itodpfexqd T Hsx Achsk

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, Load capacity: 150 kg Band width: max. 240 mm Coil diameter: max. 800 mm Spreading range: 320 ... 520 mm Itedpfxozi Ex Io Achjk Design: • Motorized drive • Loop control via contact switch on the bobbin base • Limiting disc at the rear • Limiting ring at the front • Manually adjustable brake • Potentiometer for start-up delay

Condition: used, Year of construction: 2001, Overview Itodpfx Asy Sccfjchjk The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  - Total output: 70 cycles/min - electrical connection: 400V/N/PE/50Hz, 3,6kW - Two lanes Additional information - best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) - conveyor for packages available

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm Ijdpfezuygqox Achotk • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, Year of construction: 2001, Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  - Total output: 70 cycles/min - electrical connection: 400V/N/PE/50Hz, 5,1kW - Two lanes Additional information - conveyor for packages available Iodpfoy Scb Uox Achetk

Condition: reconditioned (used), functionality: fully functional, Roll Divider and Rounder Machine Itodpfx Ajxcqgdschsk Fortuna Automat Grüße 4 E 30-part roll press With moulding deactivation Dough input: 1200–3300 grams Dough piece weight: 40–110 grams Knife head electrically tiltable to the rear for cleaning Dividing head/knives newly reworked Knives made of stainless steel Machine was completely overhauled and repainted 2 years ago Moulding plate and operating manual included

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Veneering press equipped with automatic loading/unloading. Manufacturer: SCM Group (division SERGIANI) Model: SERGIANI GS-A 6/120 30-13 PM Production year: 2020 Machine state: like new Main technical parameters: - platens dimensions: 3.000 x 1.300 mm - overall thrust: 120 tons - number of pistons: 6ks (diam. 85 mm) - max. opening: 120 mm - oil boiler consumption: 36kW Itsdszutpxspfx Achek Main features: - solid-steel drilled platens - oil heating with electric boiler (max. 120°C) - exclusion of left pair of pistons - automatic flatness control - powered pre-loading composition belt (3.000 x 1.300 mm) - unloading grafity table with rollers - automatic loading/unloading system Programator: - control panel with touchscreen LCD (size 15 cm) - setting of pressing working programs - setting of pressure, time and temperature - timer for boiler heating start-up Machine immediatelly available.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Itsdpfxjzuwyzo Achok Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Iodpfxjzu Nyae Achjtk Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, System consisting of: 1 Welding robot Qirox QRC 350-E including control unit, programming handheld device, 24 V buffer, PC connection on the control cabinet side, 2 GB flash drive from a training system, in like-new condition, manufactured in 2023. Gas nozzle sensor, arc welding seam tracking, multi-layer welding technique, point editor, oscillating patterns, transformation. Itsdpfxezu Shyj Achsk Qineo Puls 600 with Premium control module, wire feeder, torch hose package, welding torch MRW 510 evo, torch testing gauge, mechanical cleaning, pressure booster. Like-new floor track with a capacity of 20 kN, travel distance 12 m, robot is mounted on a C-shaped stand in a hanging position, manufactured in 2019, 135 operating hours. 2 Rotary positioning device with counter bearing TC 5 kN (no operating hours), load capacity 1000 kg, clamping length 5.0 m. Connection control, 4 light barriers, 2 start pre-selection. Delivery date: upon agreement. The components are in stock and need to be assembled and tested. Warranty: 6 months.

Year of construction: 2016, condition: excellent (used), Manufacturer DREHER Type 1676 A Ijdpjzu Av Isfx Achjtk Refurbishment No. 2016 A-12/615 Machine Type Feeder/Strip Straightening Machine Number of straightening rollers: 7 Straightening roller diameter: 80 mm Strip width: 300 mm Material thickness: 0.5 - 4.5 mm Feed speed: in the range of up to 30 m/min Straightening adjustment: manual/mechanical Position indicator: 3 visible mechanical indicators

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 10,000 kg, number of straightening rollers: 6, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 255 mm, sheet thickness copper (max.): 3 mm, inner diameter: 510 mm, outer diameter: 1,500 mm, mandrel diameter: 510 mm, mandrel length: 1,500 mm, coil width: 1,500 mm, coil outer diameter: 1,500 mm, number of blades: 8, warranty duration: 12 months, straightening roller diameter: 140 mm, total width: 1,500 mm, Slitting line model 1,500 x 3 mm, comprising: - Decoiler Aspo mod. 1500/5Ton (customizable) - Loading table - Feeder and straightener with 6 rollers, diameter 140 mm - Rotary cutter with 4 pairs of circular blades - Automatic punching unit with 20 customized punching stations - Mechanical shear Itedpfxex Hr S Sj Achsk - Aspo recoiler

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm Iodpfx Acszu A D Eehetk 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, operating hours: 16,000 h, 2012 Intermac Master 33c CNC C-axis (for groove) AND T-axis Bed size 1500x3000mm Selection of cups and tools included Itedpfezi T Uqox Achok This CNC can be used for stone or glass. It was originally used as a stone machine but i use it for glass processing. We have two of these machines, we are replacing this one with a larger Master 38.3, machine in perfect working order and can be seen running in our factory right now. Can show buyer the basics on how to use machine. Can also dismantle and load machine for buyer. Can help out with installation. Have more detailed pictures and videos if required

Condition: used, Year of construction: 2003, functionality: unexamined, ABB IRB 1400 M2000 Robotic Welding Cell – Suitable for Parts or Refurbishment – Ireland Location: Ireland Condition: Used Power: 400V, 3 Phase Complete ABB robotic welding cell featuring an ABB IRB 1400 M2000 6-axis industrial robot with controller, teach pendant, dual-station welding fixture and full safety enclosure. Originally configured as a production robotic welding system (Plant Ref: XRWO11). Ijdpfx Aoymd E Nschjtk This system is suitable for refurbishment, retrofit, or breaking for parts and spares. Can be sold complete or dismantled and sold separately. Included in Sale: • ABB IRB 1400 M2000 6-Axis Robot • ABB S4C+ Controller Cabinet (400V 3-Phase) • ABB Teach Pendant • Dual-Station Welding Fixture / Positioner • Robot Pedestal Base • Full Steel Safety Enclosure / Welding Booth Robot Specifications: Model: ABB IRB 1400 M2000 Axes: 6 Reach: Approx. 1.44m Payload: 5–6 kg Repeatability: ±0.05 mm Manufactured in Sweden System is complete as seen in photos. Industrial used condition. Operational status not confirmed. Ideal for buyers looking for spare parts including robot arm, controller, drives, teach pendant, servo motors, or welding fixtures. Components can be removed and sold individually if required. Forklift loading available. Inspection welcome by appointment. Asking Price: €5000+ VAT (or nearest offer) Enquiries welcome for complete system or individual components.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, Profile sander FLADDER 300/L.S.4 Year of manufacture: 1996 Iodpfx Aoyrqzbschstk

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year: 2022) – Only 41 m²! Incl. Kebab & Pro Starter Package (SURA, UV DTF A+B Films and Stand) Description: For sale is a high-end professional UV printing system: A Mimaki UJF-3042 MkII e (year 2022) including the premium Kebab option. This machine is being sold due to a business closure and is a real rarity on the used market: According to the counter, the unit has only produced a total print output of 41 m². Here you are getting a system in like-new condition at an attractive used price. The printer was meticulously maintained and kept permanently connected to the power supply to ensure proper execution of automatic maintenance and circulation cycles (to prevent nozzle outages). Technical Highlights & Features: - Model: Mimaki UJF-3042 MkII e (current generation) - Year of Manufacture: 2022 - Condition: Like new (only 41 m² total printing volume) - Configuration: CMYK + White + Varnish (LH 100) - Kebab MkII Option: Included (original Mimaki unit for 360° all-round printing on bottles, glasses, etc. – new price approx. €2,700) - Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (Additional accessories worth approx. €4,000!) Because we are liquidating the entire operation, we are giving away the following professional equipment for pre- and post-processing together with the printer. These components are not sold separately – a real turnkey package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flame-treating unit for silicatization (surface pre-treatment). Ensures extreme adhesion on glass, metal, ceramic + plastic. Includes torch, gas hose, and approx. 80% remaining adhesion promoters. Current new price: approx. €2,900 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Sturdy Machine Stand Customized, stable table/stand for the Mimaki. Ensures a secure, stable hold during printing and the optimal ergonomic working height. Pricing & Sale Details: Sale is as a complete package with formal invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. A current nozzle test can be demonstrated during inspection. If interested or to arrange a viewing appointment, please contact us directly via the messaging function. Itodoyr Aiwspfx Achek

Condition: excellent (used), functionality: fully functional, volume flow: 163 m³/h, input frequency: 50 Hz, NB 80-160/147-127 A-F2-A-E-BAQE Non-self-priming, single-stage centrifugal spiral pump Pumped liquid: water Liquid temperature range: 0 .. 120 °C Density: 998.2 kg/m³ Itodpfx Aorp Ef Ejchek Technical: Speed: 2940 rpm Nominal volume flow: 163 m³/h Nominal head height: 17.1 m Actual diameter of the impeller: 147-127 mm Nominal diameter of the impeller: 160 mm Primary shaft seal: BAQE Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 100 Pump outlet: DN 80 Pressure limit: PN 16 Nominal power 11 kW Mains frequency: 50 Hz Nominal voltage: 380V 3 phases Nominal current: 20.6 weight: 162 kg ​

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa Itjdpfx Aoyxxxvschek - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,975 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, center width: 600 mm, center height: 340 mm, controller model: Siemens Sinumerik 840D SL, TECHNICAL DETAILS Maximum turning height: 340 mm Turning diameter over bed: 680 mm Turning diameter over slide: 565 mm Distance between centers: 600 mm Spindle bore: 65 mm Spindle speed: 0–5,000 rpm Travel in X-axis: 260 mm Travel in Y-axis: 635 mm MACHINE DETAILS Control system: CNC Controller: Siemens Sinumerik 840D SL Power: 25 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,500 x 2,300 mm Itsdpfx Acezuwx Dshek Weight: 6,500 kg Operating hours: 10,975 h EQUIPMENT Documentation CE marking CE certificate