Used Profile Bender Ahb 60 for sale (25,347)

Condition: as good as new (ex-display), Year of construction: 2024, shaft diameter: 60 mm, bending machine model AHB 60 Iiodpfx Asdkxvmsmieb ZOPF - three roller driven - two hydraulic adjustments - 2 digital readout with memory - standard roller set - horizontal and vertikal use - 60 mm shaft HS-Code: 8462 2998

Condition: excellent (used), functionality: fully functional, CURVAPROFILI GAIANI DIAMETER 40 3 ROLLERS Iiodpfx Amjxzgnnsieb HORIZONTAL USED MACHINE INTERNAL CODE: SVR 370

Condition: new, Year of construction: 2024, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Iiedpfxsdktnks Amiob

Condition: used, functionality: fully functional, ---EURING PROFILE BENDER CM 2000 (N.1), SHAFT 30, 2 ROLLER DRIVES. DIMENSIONS: 70X55X145 (h) cm, Weight: 200 kg Iiedjwn Hz Rjpfx Amieb ---EURING PROFILE BENDER CM 2000 (N.2), SHAFT 30, 2 ROLLER DRIVES. DIMENSIONS: 70X55X145 (h) cm, Weight: 200 kg

Condition: used, functionality: fully functional, PROFILE BENDER FOMP DIMENSIONS: 160X120X115 (h) cm, WEIGHT: 1300 KG Iisdpev Ifq Ejfx Amieb

Condition: new, empty load weight: 303 kg, overall weight: 750 kg, axle configuration: 2 axles, permissible axle load (axle 1): 750 kg, permissible axle load (axle 2): 750 kg, loading space length: 6,060 mm, loading space width: 1,220 mm, loading space height: 400 mm, total length: 7,300 mm, total width: 1,670 mm, suspension: other, tire size: 155/70 R13, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, TEMARED Trailer Type PROFILE 6012 For transporting long pipes and profiles Loading area: 6060 x 1220 mm Legally: 750 kg gross weight, payload up to 447 kg Technically: 1500 kg gross weight, payload up to 1197 kg Brand new trailer 2 years roadworthiness inspection (TÜV) at initial registration, 2-year manufacturer's warranty Features: Hot-dip galvanized welded steel frame Open construction Front and rear drop-down side panels Galvanized V-drawbar Winterhoff coupling Jockey wheel Maintenance-free, rubber-sprung KNOTT axles Tyres: 155/70 R13 on steel rims Plastic mudguards 12V lighting system, 13-pin plug Multi-function taillights Front position lights Side marker lights 2 wheel chocks with brackets Registration documents (vehicle registration certificate, COC) The above-mentioned features are included in the price. Dimensions: Loading area: 6060 x 1220 x 400 mm (LxWxH) Bed height: 370 mm Overall length: 7300 mm Overall width: 1670 mm Overall height: 890 mm Gross weight: 750 kg (legally) Gross weight: 1500 kg (technically) Unladen weight: from 303 kg Payload: up to 447 kg (legally, depending on configuration) Axle load: 2x 750 kg Nose load: 75 kg Optional extras at additional cost: Aluminium toolbox + EUR 150.00 Closed floor version + EUR 200.00 Trailer available to order. Delivery available at additional cost! Financing on request. Come visit us or write to us. Offer price includes 19% VAT. Viewings: Mon-Fri 09:00 - 17:00 Isdpfx Amox Uqy Djioib Saturday 09:00 – 12:00 Offers and further information available on request: Office Tel. +49 (0) 2254/83718-20 Subject to technical modifications, printing errors, mistakes, and prior sale. Images may show optional accessories. *Please note legal requirements regarding weight and speed restrictions.

Condition: new, Shaft diameter: 60Upper Roll Diameter: 215Bottom Roll Diameter: 215high performance hydraulic: 16working speed: 4motor power: 1,5length: 1000width: 1400heigth: 1650weight approx.: 950 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls Isdpfx Amed Ab H Rjieib - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 12460 € 239.23 € 60 mm 500 mm 760 mm 1000 mm 186 kg 10 cm³ 60 x 4 mm 2" x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 3 mm 60 x 6 mm 64 x 6 mm 64 x 6 mm 63 x 4 mm 50 x 4 mm 35 mm 35 x 35 mm 60 x 20 stehend, 60 x 35 mm 380 mm 10 mm 10 mm 1,5 / 3 U/min 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation Iedpswiru Sofx Amieib foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Dimensions: 200x75x197 cm LxWxH Iodpencc Husfx Amijib

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Iedsw A H T Ajpfx Amisib Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: excellent (used), Catalogue number 7303 TECHNICAL DATA - Cutterhead width: 640 mm - Number of knives: 3 pcs - Max. thickness of workpiece: 250 mm From above: - Pawls - Toothed, feed-in roller - Hold-downs - Planing shaft - Hold-downs - Smooth, feed-out roller From below: - Adjustable rollers on lower table: 2 pcs - Motor: 7.5 kW - Electric table lift - Lift motor: 0.75 kW - 4 feed speeds - Feed motor: 1.5 kW - Extraction port diameter: 140 mm Iedpfx Amsy S Ad Aoieib - Dimensions (L/W/H): 1120x1250x1680 mm - Weight: 1033 kg – Made in Poland – Used thickness planer, very good condition Original photos Net price: 21,900 PLN Net price: 5,200 EUR (conversion rate 4.2 EUR) (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Iiodpfx Ajy Sny Asmisb Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2005, Hedelius RS 60 K - 2000 Year of manufacture: 2005 Control: - Heidenhain iTNC 530 Isdpey H D S Dsfx Amisib - Electronic handwheel Main spindle: - SK40 - Max. spindle speed: 15,000 rpm Travel paths: - X – 2000 mm (775 + 600) mm, Y – 620 mm, Z – 520 mm Table: - Clamping area fixed table 1200 x 600 mm (left working area) - NC rotary/tilting table (right working area) - NC rotary table, 360° rotatable / tilting +15 / -95° Coolant: - 20 bar through-spindle coolant (IKZ) - Chip conveyor Extraction: - Emulsion mist extraction system Delivery time: - Immediately available

Condition: good (used), Muhr + Bender KBL 16 Optima Muhr und Bender Optima KBL 16 Iodpfsyy S E Sex Amijib Round steel 45 mm Square steel 42 mm Angle steel 90×9 mm Throat depth of punch 500 mm

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm Iisdpfx Asd Ih Stomijb total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm Iedpfoy Ddv Rjx Amisib - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg ADVANTAGES - Wide planer for wet and dry timber Iedpfx Asytdkxomisib - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller Ijdpfx Aeyz Sfbemisib - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA Iijdsytd A Uepfx Amiob - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6935 TECHNICAL DATA - Shaft width: 630mm - Number of knives: 4 pcs - Max. thickness of workpiece: 210mm * Top section: - Anti-kickback fingers - Serrated feed roller, driven - Pressure bars - Planing shaft - Pressure bars - Smooth outfeed roller, driven * Bottom section: - Adjustable rollers on the lower table: 2 pcs Ijdpfjytd Uqex Amioib - Motor: 4.4kW - 2 feed speeds - Dimensions (L/W/H): 1220x950x1060mm - Weight: 750kg ADVANTAGES – Made in Germany – Used thickness planer, very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may vary in case of significant currency fluctuations)

Condition: excellent (used), Catalogue number 7732 Iisdeyfhiijpfx Amijb TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Iisdpfsyvvkwox Amijb Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Box profile: 60 x 40 mm Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) Ijdpfxoynlrao Amioib 02x safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport Iisdpfxexaaipe Amieb - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Iedpjyrihgofx Amisib Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg