Used Precision Saddle Slideways Mounted On Roller Beari for sale (29,147)

Condition: used, travel 150 mm slide width 75 mm Bwjdpfx Amovimvfsren height 32 mm threaded spindle M8 x 1 with cross crank and scale graduation 0.1 mm capacity approx. 1.5 kg space requirements length - 380 mm x width - 75 mm x height - 32 mm weight approx. 3.6 kg - price per unit -

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod Bwsdjxvr T Ejpfx Amrsn - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: used, load capacity 7,700 kg Bwsdsfii Dpopfx Amren can be screwed-on with insulation plate B4 construction height 63 mm in middle position adjustment range +4 / -6 mm dimensions 200 x 200 mm internal thread M20 weight 9.5 kg - new - unused - 6 units on stock price per unit  

Condition: used, load capacity 25,000 kg freestanding insulation plate and anti-slip plate on the underside anti-slip plate on the upper side construction height 88 mm in middle position adjustment range 13 mm dimensions 370 x 230 mm weight 31.8 kg Bwsdpefii Dmofx Amren - new - unused - 21 units on stock  price per unit    

Condition: new, R425-1G4S7 NSK TAPERED SINGLE ROW ROLLER BEARINGS NEW, NEVER USED Main Demensions: 425 x 700 x 150 mm Weight 216 kg Bwsdeqpf T Iepfx Amren 2 units available WAREHOUSE LIQUIDATION

Year of construction: 2012, condition: new, TIMKEN TAPERED ROLLER BEARINGS NP342204-90WA2 NEW NEVER USED 14 UNITS AVAILABLE WEIGHT 320 KG/ EACH PACKED INTO ORIGINAL WOODEN BOX WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: 22324 EDK FAG x2 un. 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 Bwodpfxeqpd Sne Amron 23224 HL BM S x1 F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6 PRICE FOR NEGOTIATIONS

Condition: new, 2TR19H C3 FP KOYO TAPERED ROLLER BEARINGS NEW Dementions: 482.60 x 615.95 x 184,15 mm Weight 150 kg WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: NP342204-90WA2 TIMKEN x14 units 22324 EDK FAG x2 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6 Bwedpfsqpgc Njx Amrjn

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Description Bwedsb Rnv Sspfx Amrjn Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: new, STF374KV5051GAS3 FOUR ROW TAPER ROLLER BEARINGS NSK Bedpjqpfvbjfx Amrown NEW, NEVER USED Main Demensions: 374,65 x 501,65 x 250,83 mm Weight 156 kg 3 units available WAREHOUSE LIQUIDATION

Condition: new, functionality: fully functional, overall weight: 24,000 kg, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: MYC1500x6000F4000, Crawler Mobile Mud Stone Separator – Model MYC1500×6000F400O The MYC1500×6000F400O Crawler Mobile Mud Stone Separator is a high-performance soil and stone separation machine developed by Henan Mingyuan Heavy Industrial Equipment Co., Ltd. It is designed for efficient separation of clay, mud, and fine soil from mixed materials such as sand, gravel, and construction waste. With its crawler-type mobility, large-capacity drum screen, and intelligent control system, this model provides a flexible and reliable solution for material cleaning and classification in complex working environments. Applications The MYC1500×6000F400O is widely used in: Sand and gravel production: Removes clay and impurities from raw aggregates, improving product quality. Construction waste recycling: Separates soil and debris for reuse of clean aggregates. Mining and quarrying: Pre-screens and washes ores, removing sticky soil before crushing or beneficiation. Infrastructure and road construction: Cleans and classifies soil and stone for foundation preparation. Municipal and river dredging projects: Separates sediment, stones, and debris from dredged materials. Its crawler chassis allows easy movement on muddy or uneven ground, making it ideal for on-site operations where fixed installations are not practical. Main Features 1. Crawler Mobile Design Equipped with a heavy-duty crawler chassis and hydraulic drive, the machine can move flexibly on various terrains. It eliminates the need for additional transport equipment, reducing setup time and improving efficiency. 2. High-Efficiency Drum Screening The 1500 mm diameter and 6000 mm long rotary drum provide a large screening area and high throughput. The wear-resistant mesh panels ensure long service life and easy maintenance. The optimized screen aperture effectively separates mud and fine soil from larger aggregates. 3. Integrated Cleaning System Internal spiral blades and high-pressure spray nozzles work together to wash and separate sticky materials. This dual-action cleaning ensures clean aggregates that meet construction and production standards. Bwedpfx Asy Dz U Demron 4. Intelligent Control The PLC control system allows adjustment of drum speed, water flow, and feed rate according to material conditions. Automatic overload protection and fault alarms enhance safety and reliability. 5. Energy-Saving and Eco-Friendly The hydraulic-electric hybrid drive reduces fuel consumption and emissions. The water recycling system minimizes water usage, making it suitable for environmentally sensitive areas. 6. Easy Maintenance Modular design and accessible components simplify inspection and servicing. Quick replacement of wear parts reduces downtime and maintenance costs. 7. Strong Adaptability Capable of handling clay-rich soil, river sand, construction debris, and weathered rock. Adjustable screening parameters make it suitable for different particle sizes and moisture levels. Technical Parameters Specification Model:MYC1500×6000F400O Screen Typ: roller screener Roller screener width/:1500 mm Roller Screener Length:6000 mm Feeding Size≤ 600 mm Capacity: 80–300 t/h (depending on material) Power System Diesel engine + hydraulic drive Mobility:Crawler-type chassis Control System PLC intelligent control Water System High-pressure spray, adjustable flow Discharge Dual outlet for clean stone and mud Weight :Approx. 22 tons Dimensions (L×W×H):9,800 × 2,800 × 3,200 mm

Condition: new, functionality: fully functional, power: 30 kW (40.79 HP), Year of construction: 2025, A double roller crusher for sand making, also known as a roller sand making machine, is a processing machine that utilizes two rollers to crush and reshape coarse-grained materials such as rock, stone, and ore into finer particles. This type of equipment is commonly used in the production of construction aggregates, artificial sand, and other materials used in various industries. Here are key features and aspects of a double roller crusher for sand making: 1. Double Roller Design: - The crusher has two parallel, counter-rotating rollers that exert pressure on the material. The gap between the rollers can be adjusted to control the size of the crushed particles. 2. Crushing Mechanism: - The material is fed between the two rollers, and as they rotate, the material is drawn into the crushing zone. The rollers compress and crush the material, reducing it to the desired size. 3. Material Feed and Discharge: - The material is typically fed into the top of the crusher and is crushed between the rollers. The crushed material exits at the bottom of the machine. 4. Adjustable Gap Settings: - The gap between the rollers is adjustable, allowing for control over the final size of the crushed material. This feature is essential for producing materials of different particle sizes. 5. Roller Surface Design: - The surface of the rollers may be smooth or have corrugations to enhance the gripping and crushing action. The choice of roller surface design depends on the characteristics of the material being processed. 6. High Efficiency: - Double roller crushers are known for their high efficiency in crushing and shaping materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 7. Versatility: - These crushers are versatile and can be used for various materials, including hard and soft rocks, ores, and other aggregates. They are particularly suitable for producing artificial sand. 8. Dust and Noise Control: - Some double roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. Application in Sand Making: - Double roller crushers for sand making are commonly used to produce fine aggregates and artificial sand. They are employed in the production of high-quality sand for construction and other applications. Bwsdeq Ngamopfx Amren 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Motor and Drive System: - A powerful motor and a reliable drive system are essential components to drive the rotation of the rollers and ensure consistent and efficient crushing. The specific design and features of double roller crushers for sand making can vary among different models and manufacturers. When selecting or using this type of equipment, it's important to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: new, functionality: fully functional, Year of construction: 2024, A crawler mobile stone crusher is a mobile crushing device that has a tracked chassis, which allows it to move around the site and be transported from one location to another. This type of crusher is generally used in areas where there are space restrictions and the stones need to be crushed directly at the site, making it a versatile and flexible option for various applications. Here are some key features and aspects of crawler mobile stone crushers: 1. Mobility: - The primary advantage of a crawler mobile stone crusher is its mobility. The tracked chassis enables it to move easily on different types of terrain, making it suitable for a wide range of applications, including construction sites, quarries, and demolition projects. 2. Crushing Mechanism: - Crawler mobile stone crushers are equipped with a primary crusher to break down the large rocks into smaller pieces. Common types of primary crushers include jaw crushers, impact crushers, or cone crushers. 3. Versatility: - These crushers are versatile and can handle various types of materials, including hard rocks, ores, and recycled concrete. They can be used for primary, secondary, or tertiary crushing depending on the specific requirements of the application. Bsdpfx Amoq Nxpgsrewn 4. Remote Control Operation: - Many crawler mobile crushers are equipped with remote control systems, allowing operators to control the equipment from a distance. This feature enhances safety and efficiency, especially in challenging or hazardous environments. 5. Compact Design: - Crawler mobile stone crushers typically have a compact design, making them suitable for working in confined spaces or on construction sites with limited available space. 6. Hydraulic System: - The crushers are often equipped with a hydraulic system to facilitate quick and easy adjustment of the crusher settings. This includes adjusting the crusher's discharge opening and controlling the feed rate. 7. High Production Capacity: - Despite their compact design, crawler mobile stone crushers can have high production capacities. This is crucial for efficiently processing large volumes of material on construction sites or in mining operations. 8. Screening Unit (Optional): - Some crawler mobile crushers come with an integrated screening unit, allowing the production of multiple particle sizes in a single pass. This can be particularly useful in applications where a specific range of sizes is required. 9. Power Source: - Crawler mobile stone crushers are typically powered by diesel engines, providing the flexibility to operate in remote areas where electrical power may not be readily available. 10. Easy Maintenance: - Many crawler mobile crushers are designed with ease of maintenance in mind, with features such as access panels and service points to simplify routine inspections and repairs. Crawler mobile stone crushers have become popular in the construction and mining industries due to their flexibility, mobility, and ability to crush a variety of materials on-site. They offer a solution for efficient and convenient mobile crushing operations in diverse working environments.

Condition: used, functionality: fully functional, Jones & Shipman 540 Precision Surface Grinder Classic Jones & Shipman 540 precision surface grinder in good used industrial condition. Highly regarded British-built machine ideal for toolrooms, precision engineering, fabrication and general grinding work. Fitted with magnetic chuck, adjustable table feeds and coolant guards. Solid, accurate and reliable machine with heavy cast iron construction throughout. Features: Bsdey R D Dzopfx Amrjwn Jones & Shipman 540 model Precision surface grinder Magnetic chuck fitted Manual table and cross feed controls Coolant splash guards Heavy duty cast iron build Ideal for precision grinding and toolroom work Condition: Used workshop condition with normal cosmetic wear for age. Machine is complete and well maintained. Suitable for engineering workshops, maintenance departments, toolmakers and restoration projects. Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Bedpoxhfpwofx Amrswn Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 673 mm, turning diameter: 313 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 75 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 2,123 mm, total length: 3,257 mm, total width: 2,312 mm, spindle nose: 6, overall weight: 8,118 kg, spindle diameter: 250 mm, CNC Fanuc 31i TURNING SWING DIAMETER Over guide cover: 673 mm WORKING AREA Chuck size: 250 mm Bar capacity: 65 mm Maximum turning diameter: 313,7 mm Maximum turning length: 520,7 mm MAIN SPINDLE Maximum spindle speed: 4.000 rpm Maximum motor power: 26 kW Maximum torque: 421 Nm Base spindle speed: 590 rpm Spindle nose: A2-6 / 25C Spindle bore: 75 mm Maximum 3-jaw chuck size: 250 mm Spindle orientation: 1° SUB-SPINDLE Maximum spindle speed: 5.000 rpm Maximum torque: 347 Nm Base spindle speed: 420 rpm Maximum motor power: 11 kW Spindle nose: A2-6 / 20C Chuck size: 200 mm Bar capacity: 51 mm Spindle bore: 60,4 mm Bwodpfx Amjzbicvoren Spindle orientation: 1° Maximum stroke: 638 mm Maximum rapid traverse: 38 m/min Maximum distance between sub-spindle and main spindle: 654,1 mm COOLANT SYSTEM Tank capacity: 254 L Maximum pressure: 13,8 bar High-pressure coolant through turret: 68,95 bar ADDITIONAL FEATURES Resolution: 0,0001 mm Machine length: 3.257 mm Machine depth: 2.312.4 mm Machine height: 2.123 mm Machine weight: 8.118 kg Machine equipped with: • SUPER-PRECISION® certification • Air blast on main spindle • 20C collet spindle • Custom Macro B programming • Reinforced HARCRETE® machine base • Grease lubrication on all axes • Optical scales on X, Y and Z axes • 12-bar through-tool coolant system • Parts counter and operating hours counter • Axis resolution: 0.00010 mm • Maintenance kit • Manual Guide i (programming system) • Rigid tapping (without compensation holder) • Laser measurement system with Renishaw ball probe • Live tooling, Y-axis and 20C sub-spindle option Configuration includes: • Sub-spindle • 12-station BMT-55 tool turret with live tooling drive • C-axis on both main spindle and sub-spindle • Y-axis • Optical scale on Y-axis • Ready To Cut option (Warm-up Cycle – Automatic Start) • MARPOSS workpiece probe for BMT-55 • MARPOSS tool setter • Workpiece presence detection in the sub-spindle • Chip conveyor – discharge on the right-hand side of the machine (interface included) • High-pressure coolant system • Spindle reduction sleeve kit • Operating and maintenance manuals and CE Declaration of Conformity

Condition: like new (used), Year of construction: 2022, Modern and fully functional injection molding machine Krauss Maffei precision Molding 160-750, year of manufacture 2022. This machine is one of the top-of-the-line equipment for industrial plastic injection molding, designed for precise, reliable and efficient series production. Thanks to its modern design, high performance and precise control system, it is suitable for the production of demanding plastic components for the automotive industry, electronics, consumer goods and industrial components. Technical parameters • Manufacturer: Krauss Maffei, Germany • Model: precisionMolding 160-750 • Year of manufacture: 2022 • Power supply: 400 V / 50 Hz / 3P + N + PE • Rated heating power: 4.8 kW • Motor power: 25.2 kW • Total socket power: 55.0 kW • Full load current: 143.3 A • Back-up fuse: 50 A • SCCR: 25 kA Machine characteristics and advantages • Precision and reliability: enables the production of high-precision parts with repeatable quality • Energy efficiency: optimized power and heating control minimizes energy consumption • Modern control system: intuitive control and precise adjustment of injection parameters • Production flexibility: suitable for various types of plastic parts, from small precision parts to larger components • Possibility of purchasing injection molds: allows for immediate expansion of production capacity • Production process support: with If you are seriously interested, we can provide you with contact information for buyers of the manufactured parts Use of the machine The machine is suitable for a wide range of industrial Bwjdpsza A H Esfx Amrsn uses: • Automotive industry – precision body parts, covers, technical components • Electronics – device covers, switches, connectors • Consumer goods – components for household appliances, toys, packaging • Industrial components – technical parts requiring high precision and reliability Condition and availability The machine is in fully functional condition, regularly serviced and ready for immediate use in production. Possibility of personal inspection by arrangement.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U1060515116, Equipment: type plate available, Lincoln Electric Precision TIG 375 – TIG welding unit with water cooling (TEC ARC TC2000) For sale is a high-performance TIG welding unit, model Lincoln Electric Precision TIG 375, ideal for demanding welding applications in industrial environments. Bwodpfx Amsy A Sgnoren Technical highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency ignition (HF) - Pulse function and extensive adjustment options - Foot pedal connection available Equipment: - Integrated TEC ARC TC2000 water cooling - Hose package / torch included - Robust chassis with casters - User-friendly control panel with precise regulation Condition: - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Special features: - Highly reliable industrial equipment from Lincoln Electric - Perfectly suited for workshops, metal construction, and production - High duty cycle for continuous operation Scope of delivery: - Welding machine - Cooling unit (water cooling) - Torch / hose package - Power cable If you are interested or have any questions, feel free to contact us. Viewing and test run possible by appointment.

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 800 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, warranty duration: 12 months, type of input current: AC, input voltage: 230 V, compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, High-Precision Reference Measuring Center – Mahr OMS 800/500 HA Multisensor Coordinate Measuring Center with Extended Z-Axis Measuring Range Factory overhauled and modernized in 2025 – ready for immediate use. Technical Data Measuring range: 800 × 800 × 500 mm Sensors: - Optical sensor: Camera & laser (active measurement) - Renishaw TP200 touch probe (other options: TP20, SP25, etc.) - Camera system with 10x objective (optional: 1x, 5x, 20x) - 3D multisensor head MSH with transmitted light, incident light, laser & probe mount Software: OptiCheck3D 2025 – user-friendly, interactive programming Evaluation station: High-performance PC with Windows 11 Professional (64bit) Accuracy: - Length measurement uncertainty: E1 = 0.9 + L/600 µm - E3 = 1.9 + L/400 µm (L in mm) - Scale resolution: 0.1 µm Dimensions / Weight: - Size: 2360 × 1940 × 3300 mm - Weight: approx. 8090 kg - Max. workpiece weight: 50 kg (glass), 100 kg (granite), extendable Bwsdpfoxbyxysx Amren - Traverse speed: max. 200 mm/s Device Details Model: Mahr MarVision OMS 800/500 HA CNC Design: High-precision, air-bearing multisensor measuring center Special feature: Active vibration damping (BILZ Bi Air) Condition: From laboratory use in precision measurement room, factory-refurbished in 2024 New price of comparable equipment: from approx. €650,000 Delivery time: approx. 4 weeks from order Highlights - Leasing option: 0% interest, without bank transaction - Factory overhaul 01/2024 with warranty & guarantee - Live demo: Available online or on-site - Optional service package: Worldwide transport, commissioning, calibration/certification, training, user instruction - 18 months free: Software update service & hotline support - Software: Full license OptiCheck3D (no subscription fees) - Remote service: Online board support directly at the measuring device - Custom modifications & retrofits on request - Latest 64-bit CNC controller & evaluation station (Windows 10/11) Supply & Environment - Compressed air: 6 bar ±0.1 bar (filtered, ISO 8573-1, consumption approx. 160 Nl/min) - Voltage: 115/230 V ±10%, 50/60 Hz ±5%, 2500 VA Environment: - Temperature: 20 °C ±1 K - Humidity: 40–70% RH - Vibrations: < 5 µm amplitude at < 5 Hz Service & Demo - Online demos available at short notice - Optional on-site demonstration at customer location

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 8,000 mm, workpiece height (max.): 30 mm, workpiece weight (max.): 150 kg, TECHNICAL DETAILS Maximum plate length: 2,500 mm Maximum plate width: 8,000 mm Maximum plate thickness: 30 mm Maximum weight: 150 kg MACHINE DETAILS Bjdpfx Ajy Nbcxsmrown Tilting station transfer height: 680 mm Belt conveyor with lifting function for discharge: 40 mm Belt conveyor with lifting function for transfer to roller conveyor: 265 mm Roller conveyor and belt conveyor transfer height: 920 mm Conveying direction Lengthwise on roller conveyors Crosswise on toothed belt conveyors Electrical Data Operating voltage: 400 V +N +PE - 50 Hz Control voltage: 24 V DC Brake voltage: 230 V AC Drive Technology Manufacturer: SEW Protection class: IP54 Quick-connect plug and hybrid cable on SEW fieldbus modules EQUIPMENT Sensors: Leuze Metalwork

Condition: excellent (used), EXMAC Precision 760 Scroll Saw – Demonstration Unit from Authorized Dealer For sale is a high-quality EXMAC PRECISION 760 scroll saw from our showroom display. This machine was only used for demonstration purposes and is in excellent condition with minimal signs of use. As the top model in the EXMAC scroll saw range, the Precision 760 impresses with its particularly robust construction, low-vibration operation, and extra-large throat depth – ideal for precise scrollwork and fine cutting tasks. Perfectly suited for wood, plastics, and non-ferrous metals, as well as for demanding hobbyists and professional workshops. Highlights: - Extra-large throat depth of 762 mm - Infinitely variable stroke speed: 400–1550 strokes/min - Tool-free blade change - Tilting head for precise angle cuts - Integrated dust blower for clear visibility of the cutting line - Low-vibration operation thanks to high machine weight (approx. 44 kg) Technical Data: - Throat depth: 762 mm - Maximum cutting height: 51 mm - Power: 345 W / 230 V - Stroke: 21 mm - Table dimensions: 820 × 360 mm - Weight: approx. 44 kg Condition: - Demonstration unit - Technically flawless - Hardly any signs of use - Includes accessories and operating manual The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Bwodpfeyuudrjx Amren Related terms: Scroll saw, fret saw, fine-cut saw, contour saw, model building saw, marquetry, fine wood cutting, precision saw

Condition: ready for operation (used), Faithfull Printing Equipment Digithick TM-353 High-precision Thickness Gauge SN:602262 + Side Table 1040 x 520 x 760 mm, used, normal signs of wear, 100% fully operational, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and transport! Bedpox Eq Hrofx Amrjwn

Condition: used, High precision tube mill 38x2,7 SEUTHE / EFD / MAIR Technical specifications - Tube OD range: 11 – 38 mm Bodpfx Amjyl Uhlerown - Wall thickness range: 0.7 – 2.7 mm - Maximum speed: 120 m/min Special features - Strip whashing tunnel: Cleaning tunnel to remove oils and dirt from strip - Cold rolling inline with Vollmer thickness control: Reduction of strip thickness from 0.03mm to 0.3mm - Reinforcement of FP3 for high tensile strength - Individual motorization in sizing stands - Carbide tungsten rolls - Ceramic rolls at welding stand - All contact parts are NON-MARKING SEUTHE / EFD / MAIR HF welded tube line 38x2,7 This premium-quality production line engineered for the manufacture of high-tolerance welded steel tubes with superior surface finish and dimensional accuracy. Designed to meet the most demanding requirements of the automotive, furniture, and high-quality tube manufacturing sectors, this line combines advanced forming technology, inline strip processing, and state-of-the-art automation. This tube mill is specifically developed to deliver exceptional roundness (up to 0.05 mm) and tight dimensional tolerances, producing finished tubes with tensile strength of up to 660 N/mm². The line incorporates a strip washing tunnel to eliminate oils and contaminants, ensuring optimal welding conditions and consistent surface quality. A key feature is the inline cold rolling unit with Vollmer thickness control, allowing precise strip thickness adjustment before forming. This system enables thickness reductions from 0.03 mm up to 0.3 mm, guaranteeing perfect thickness control and enhanced product consistency. Reinforced fin pass stands and individually motorized sizing stands (Siemens electrics, upgraded in 2024) ensure maximum stability, flexibility, and repeatability during production. The forming and welding section is equipped with an EFD Weldac HF welder (2019), carbide tungsten rolls, and ceramic welding rolls, with all contact parts designed to be non-marking, making the line ideal for visible and high-specification tubes. The sizing section and online inspection systems, delivers excellent roundness, and internal diameter tolerances (±0.08 mm). Cutting operations are handled by a MAIR flying cut-off saw (2019) with CNC control and non-marking clamping jaws, enabling optimized cutting cycles and high productivity. The line also includes eddy current testing, demagnetization, defect marking, cleaning, and anti-rust oiling units, ensuring fully controlled quality output. Current status Offered in very good condition, currently connected and in production in Europe, this complete tube mill is an excellent opportunity for manufacturers seeking a high-end, turnkey solution for precision welded tube production. Tube OD range: 11 – 38 mm Wall thickness range: 0.7 – 2.7 mm Maximum speed: 120 m/min

Condition: used, High Precision Tube Mill SEUTHE / ABBEY / MAIR RS65 – 76.2 x 3.25 mm High-quality precision HF welded tube mill designed to manufacture tubes with excellent surface quality and tight dimensional tolerances, specifically engineered for demanding applications in automotive, furniture, and high-quality tube production. Technical specifications - Tube mill: High precision - Model: RS65 & MPS150/4/F - Tube OD range: 25 – 76.2 mm - Wall thickness range: 0.7 – 3.25 mm - HF welder: 250 kW - Maximum speed: 100 m/min Special features · Strip washing tunnel: cleaning tunnel to remove oils and dirt from strip · Inline cold rolling with Vollmer thickness control - Perfect thickness control of strip - Strip thickness reduction: 0.03 mm to 0.3 mm · Reinforced forming stands for high tensile strength · 6 sizing-reducing stands · All contact parts are non-marking SEUTHE / ABBEY / MAIR HF welded tube line 76x3,25 mm Consistent tolerances and superior surface finish RS65 line integrates strip washing tunnel and inline cold rolling unit (Carl Wetzel KG) with Vollmer thickness control for precise strip management (0.03–0.3 mm reduction). ABBEY ETNA forming section features motorized breakdown stands, finpass stands, 250 kW HF welder, complete inside scarfing and triple OD scarfing, plus 6-stand sizing with individual motors. Inline Quality Control & Finishing Prüftechnik Eddycheck 610 eddy current testing, demagnetisation, defect marking, anti-rust oiling, and MAIR automatic magnetic packing system ensure production-ready output. High-Speed Cutting SEUTHE TS90 flying saw with linear OPTRONIC CNC control and non-marking jaws supports production speeds up to 100 m/min. Delivers consistent high-quality tubes with integrated thickness control and comprehensive inline testing—optimized for demanding industrial applications. Current status Offered in very good condition, currently connected and in production in Europe, this complete tube mill is an excellent opportunity for manufacturers seeking a high-end, turnkey solution for precision welded tube production. Tube diameter: 25 – 76.2 mm Thickness: 0.7 - 3.25 mm Maximum speed: 100 m/min Coil OD: 2100 mm Coil ID: 1100 mm HF welder: 250 kW Total installed power: Approx. 680 kVA Bwedjyl Ugbepfx Amrsn

Condition: new, Description: High precision and stability for the highest cutting quality Smooth belt running thanks to balanced flywheels with rubber coating Adjustable HSS precision three-roller guide for the saw blade top and bottom for exact cutting results Two cutting speeds for different applications and materials Precise parallel stop with double clamping and quick fixation Quiet induction motor, maintenance-free and robust Restart protection: prevents unintentional start-up after a power failure Convenient tilt adjustment of the gray cast iron saw table for precise tilt cuts thanks to gear rim guide Quick release lever and tool-free door opening for easy saw blade changes Blade tension indicator with scale for checking the blade tension Tool-free height adjustment of the saw blade guard LED work light to illuminate the interface External suction possible for low-dust work Drawer for easy disposal of the collected sawdust Extendable table extension for safe processing of large Workpieces Cutting radii with circular cutting device (accessory) Regrinding surfaces and curved saw cuts with belt grinding device (accessory) Base frame with wheels for comfortable position changes Technical data: Dimensions: 665 x 980 x 1600 mm Support surface: 560 x 400 mm Working height with base frame: 1000 mm Saw table swivel range: 0 - 45 ° Cutting height: 170 mm Passage width: 307 mm Cutting speed: 410 / 880 m/min Saw band length: 2240 mm Nominal input power: 900 W Output power: 660 W Weight: 79 kg Scope of delivery: Band saw BAS 318 Precision DNB Universal band saw blade A6 Bjdpfx Amovwf Najrswn Base frame Parallel stop Angle stop Extraction adapter (for Ø 44, 58, 100 mm) Dust container Push stick

Year of construction: 2019, condition: used, Automatic high-precision tube cutting machine TS72, made by ADIGE Cuts round, square, rectangular, and flat-oval tubes up to 102 mm in diameter. Efficient production: - Program up to 4 different cut lengths per tube - Continuous measurement changes for small batches Organized unloading: - Program up to 3 different unloading positions plus a scrap container. Non-Stop unmanned production: - Automatic production changes without tools. - High-capacity bundle loader holds up to 4000 kg of material. Superior Cutting Quality: High precision, efficiency, and versatility for tube cutting - Independently operated hydraulic material clamps ensure precise clamping and high cut accuracy. - Blade and clamps detach during return movement to prevent wear. TECHINCAL DATA Working range - Round tube cutting: from 8 to 102 mm - Square tube cutting: from 10x10 to 80x80 mm - Bar cutting: Up to 40 mm - Cutting length: From 20 mm to 3.000 mm Loading - Loading from bundle: Fully automatic Bwodpsymangofx Amren - Unloading positions: 3 + 1 (scrap) Tools - Cutting blade diameter: From 200 to 350 mm General - Total installed power: 20 kW Round tube cutting: from 8 to 102 mm Square tube cutting: from 10x10 to 80x80 mm Bar cutting: Up to 40 mm Cutting length: From 20 mm to 3.000 mm Loading from bundle: Fully automatic Unloading positions: 3 + 1 (scrap) Cutting blade diameter: From 200 to 350 mm Total installed power: 20 kW