Used Pma Signal Converter for sale (4,503)

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, transmitter -Manufacturer: PMA, temperature control Kodsfm T E Hjpfx Adqjdr -Type: CI 45 -Output: 500 VA, 250 VAC, 2A -Dimensions: 125/22/H110 mm -Weight: 0.2 kg

Condition: used, functionality: fully functional, functionally tested; item originates from the dismantling of equipment at an automotive supplier Manufacturer: Phoenix Contact Type: MCR-S-1-5-UI-SW-DCI Kjdpfezmm N Nsx Adqodr Description: Universal signal converter from Phoenix Contact for galvanic isolation, amplification, and conversion of current and voltage signals. Designed for precise signal transmission between the field and control levels in industrial automation systems. Input signal: 0–5 V / 0–20 mA, switchable Output signal: 0–5 V / 0–20 mA, switchable Supply voltage: 24 V DC Accuracy: < 0.1 % Galvanic isolation: 2.5 kV Operating temperature: -20 °C to +60 °C Mounting type: DIN rail (35 mm DIN rail) Connection type: Screw terminals

Condition: new, functionality: fully functional, Hirschmann OZD Profi 12M G12 Multimode converter 2-port - Signal converter Kdedpfx Adstvz D Esqer Hirschmann OZD Profi 12M G12 : Transfer rate 500 kbps, Service primary side PROFIBUS, Connection type primary side other, Service secondary side PROFIBUS, Connection type secondary side D-Sub female 9-pin, Bidirectional yes, Overcurrent protection no, Galvanic isolation without, Rated current consumption 200 mA. Good working condition. Please check out our other listings as well.

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, measuring transducer -Manufacturer: ABB, temperature control signal converter -Type: CC-U/RTDR/1SVR040013R2702 -Number: 6 pieces Kdedpfx Aof Tdt Sodqor -Price: per piece -Dimensions: 105/20/H120 mm -Weight: 0.1 kg/piece

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously Kdsdjyug Hxepfx Adqjr variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA Ksdpfjyug R Rsx Adqedr • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Kdsdpfx Adezt Sb Dsqsr Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: good (used), Fanuc Level Shifter PREMOSYS VE-P-0001 Level Converter VEP0001 | VE-P Shifter PREMOSYS VE-P-0001 Level Converter This module is used to convert encoder signals fed in by a commercially available encoder. These signals can reach levels from 5 to 24V DC. A potential-free conversion to an output level of 5V DC with RS-422 characteristics takes place. Kedexl S Ubopfx Adqjdr In addition, the pulse frequency of the output signals can be output in divider ratios of 1/2/4/8/16/32/64 and 128, whereby the counting direction can be negated. For this purpose, simply flip a DIP switch. The division ratios refer only to the encoder counting signals (K1 and K2); the encoder zero signal is output undivided. Technical specifications: 5 to 24 V encoder signal input 5 V RS 422 output signals Input frequency up to 1 MHz Division ratios 1 to 128 Optical status indicator DIN rail mounting Lockable connectors Manufacturer price: €5,680 You can find more Fanuc robots and components in our shop! Some products are also available in larger quantities.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: Kdedpfx Adozlutmeqer - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: good (used), Year of construction: 2019, Mössner Rekord SSF 801 Band Sawing Machine The most powerful Mössner band saw—deployed when peak performance is required. The ultimate flagship among vertical high-performance band sawing machines. This machine stands for maximum precision, exceptionally smooth operation, and uncompromising durability in continuous industrial use. Standard Band Saw Equipment Band saw stand with robust grey cast iron construction Cutting speeds adjustable via frequency converter and three-phase motor with potentiometer; 2-speed gearbox OR infinitely variable cutting speeds with flange bearing and frequency converter Manual blade tensioning device with hydraulic indicator Tiltable work table – 30° to the right, 15° to the left Replaceable aluminum band wheels with hard rubber facing Adjustable upper band wheel Safety door switches on the band wheel doors Finish: RAL 7035 Light Grey; doors RAL 5005 Signal Blue Technical Data: Manufacturer: Mössner (August Mössner GmbH + Co. KG) Model: Rekord SSF 801 Band wheel diameter: 800 mm Max. cutting width (throat depth): 785 mm Max. cutting height: 670 mm (optionally extendable to 800 mm) Table size: 960 × 1000 mm Max. table load: 750 kg Motor power: 11 kW Cutting speed (gearbox): 26 – 180 m/min and 290 – 2000 m/min Cutting speed (flange bearing): 500 – 2000 m/min Machine weight: approx. 2,300 kg Dimensions (L x W x H): 2240 x 1080 x 2900 mm Year of manufacture: 2019 New price: €54,000 Kjdpfx Adezc Uvwjqedr "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 1,420 mm, total length: 1,830 mm, total height: 2,500 mm, empty load weight: 900 kg, Offered here is a used WK04 scale from KMK. Possible weighing range: 400g - 25kg Suitable for potatoes, onions, and beetroot Year of manufacture: 2019 Kdedpfox R Umtjx Adqjr Videos can be sent via WhatsApp upon request. Manufacturer details: WK04 Scale (Partial Portion Weigher) - Machine built from sandblasted and double powder-coated steel - Combination weigher with 4 weighing hoppers - 11-liter capacity per weighing hopper - For package sizes from 400g to 2500g, target weight is achieved in a single discharge - For 2.5kg to 15kg, target weight is achieved in two discharges - From 15kg upwards, target weight is achieved in three or four discharges - Package sizes from 0.4kg to 30kg - Independent feeding with vibratory plates - Vibration intensity of the feed adjustable via potentiometer in the control cabinet - Integrated cross conveyor with extra soft, curved carriers - Cross conveyor runs only after release by the packaging machine or, during manual packing, upon footswitch signal - For optimal product handling and adjustment to package size, the cross conveyor speed can be set using a frequency converter - Service platform with ladder - Product-contacting parts made of stainless steel - Optimal weighing achieved by easily adjusting multiple parameters relevant for filling the weighing hoppers (filling time, refill, tolerance, etc.) - Creation of up to 40 programs for different products, weights, tolerances, and outputs - Simple program management and operation via touchscreen monitor - Mitsubishi PLC - Fill level sensor for controlling the feed conveyor - 5 heavy-duty height-adjustable support feet - Can be interfaced with common packaging machines

Condition: used, mileage: 182,000 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, first registration: 01/2018, next inspection (TÜV): 01/2027, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Special equipment: Airbag on the passenger side, 13-pole trailer socket, Audio system Audio 15 (radio with color display), outside temperature display, 180 A generator, wooden flooring in the cargo area, Becker MAP Pilot navigation system, crossbars with integrated step, 138-degree rearview camera, seats in the cab: double passenger seat, seats in the cab: driver's comfort seat, rear stabilizer, reinforced front stabilizer, paneling in the cargo/loading area: plywood. Kdsdpfx Aozlvipjdqor Additional equipment: 3rd brake light, adaptive brake light, airbag on the driver's side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, 74 Ah battery, brake assistant, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, rear door (opening angle 180 degrees), body/superstructure: high-roof standard van, child safety lock, fuel tank: main tank 75 liters, continuous cargo area partition, load securing/tie-down points, headlight range adjustment, model upgrade, engine 2.1 liters - 105 kW CDI catalytic converter, wheelbase 3665 mm, tire repair kit with compressor, low emissions according to Euro 6 emission standard, sliding door cargo/passenger compartment on the right, safety belt system with warning system (driver's side), seat cover/upholstery: Lima fabric, Assyst service interval display, heat-insulating glazing, permissible total weight 3.50 t.

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066 Kedpfxsxxalno Adqedr

Condition: like new (used), GBS Test Pulse Rev. 3 Pulse Generator for Long-Term Insulation Tests The test pulse design is designed for long-term insulation tests on test objects with capacitances up to 6 nF. Converter for High-Voltage Test Transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation of the sine wave from 16-24 kHz via full bridge. · Converter voltage adjustable from 0-600 V, Imax=2.6 A, maximum power 1.3 kW · Pulse current limit 110 A (cut-off threshold) Pulse Transformer Control Ksdpfou Egz Rsx Adqedr · Control via full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limit 100 A (cut-off threshold) Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductors (150 μH, 300 μH) to adjust the pulse width and rise time to the load capacitance and voltage. · Pulse repetition frequency (0.1 – 2.5 kHz), adjustable. · Polarity: Adjustable positive, negative, or alternating depending on the polarity of the sine signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-way cascade circuit. · Total transformation ratio selectable as 1:7.7, 1:10, or 1:15 via taps. Maximum output voltage 15 kV with possible load capacitances of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · 1:1000 parallel voltage divider. · Overvoltage limitation at approx. 20-23 kV through parallel spark gaps. · Thermistor for overtemperature detection in the first transformer stage. · Ground-side current measurement socket 100 mV/A. Breakdown detection, test · If the maximum bridge currents for the transformer controls or if the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hours counter to determine the test time. Manufacturer's price approx. €59,500 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Ksdpfx Aowbqrtodqjdr Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our store! International shipping costs on request!

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22023.0202.1000, Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt upper edge adjustable from 980 to 1080 mm Undercarriage made of robust box section profiles Design in stainless steel, material 1.4301 Knife edge on both sides, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Kodpfoxch D Hex Adqedr Central drive station Gear motor, make: SEW, included Food-safe coating (depending on lead time) Speed adjustable via frequency converter (between 0.8 - 8 m/min) Including adjustment frame for 5 dispensers by Viscotec Adjustment is primarily via profiles and clamping units Height adjustment carried out manually via clamping units, all dispensers are adjusted simultaneously. Fine adjustment of the dispensers can be carried out individually via elongated holes, if necessary. Each dispenser can be adjusted laterally, in inclination, and in/conveying direction independently. Without side guides Includes engineering Pre-assembly included Installation of dispenser included at our facility In-house testing included Surface: Conveyor in stainless steel 1.4301, round tubes for dispenser frame in stainless steel 1.4301, clamping units made of aluminum 5 bars are transferred from an existing conveyor system onto our conveyor belt Control cabinet made of stainless steel 1.4301 Control and frequency converter by Mitsubishi Electric Configuration: Main switch, emergency stop switch, automatic on/off buttons Display for setting speed in m/min and adjusting the delay time for the dispenser start signal Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only for our own machine. Including control cabinet construction with 50% spare capacity Including high-grade sensors (distance photoelectric sensors capable of measuring and evaluating distance) Including high-end control (hardware and software can be expanded at any time without the need to replace the controller) Including HMI (display), approx. 7" size Including E-Plan Including program Including in-house test (interface test with Viscotec) Surface: control cabinet fully in stainless steel, sensors in stainless steel and FDA-approved.

Condition: used, mileage: 205,513 km, power: 80 kW (108.77 HP), first registration: 05/2008, fuel type: diesel, fuel: diesel, Year of construction: 2008, Mercedes Benz Sprinter II 311 CDI ∗Crew Cab ∗Dump Truck ∗Garbage Truck Gerber • Engine: 2.1 L - 80 kW CDI catalytic converter • Low emissions, compliant with Euro 4 emission standard, Group III • 6-speed manual transmission • Body/Superstructure: Crew cab with standard platform • Steering wheel (steering column mechanically adjustable) • Airbag, driver side • Exterior mirrors, electrically adjustable and heated, both sides • Exterior mirrors with integrated turn signal • Headliner in the cab • Lockable glove compartment • Seats in the cab: Driver’s seat, heated • Seats in the cab: Comfort suspension seat, driver side • 1 DIN slot in front, under the headliner • Entry lights • Digital tachograph • Interior rearview mirror • Rear wall with window • Rear wall lining • Outside temperature display • Washer fluid level indicator • Headlamp leveling system • Service interval indicator, Assyst • Heat-insulating glazing • Rotating beacon • Front mud flaps • Trailer socket, 13-pin • Exhaust pipe in front of the rear axle, left side • Battery: 100 Ah • Additional battery (reinforced) • Separating relay for additional battery • Generator: 180 A • Front stabilizer bar, reinforced • Rear stabilizer bar • Fuel tank: Main tank 75 L • Auxiliary heater (air) with timer • Fuel level sensor for auxiliary heater • Pre-installation for a three-way tipper • Wheelbase: 3665 mm • Tires: 235/65 R16C • Tire tread: 9/9 / 8/8 • Spare wheel in driving condition • Gross vehicle weight: 3,500 kg • Unladen weight: 2,590 kg • Payload: 910 kg Superstructure Kdsdpfxozmcu Io Adqsr • Gerber tipper body • Superstructure dimensions: 2,550 mm x 1,960 mm x 1,310 mm (LxWxH) - German vehicle! - First owner! - MOT/emission test valid until 03/27, renewed upon request for an additional fee! Errors and prior sale excepted! = Further information = Unladen weight: 2,590 kg Payload: 910 kg GVW: 3,500 kg

Condition: used, mileage: 800,000 km, power: 375 kW (509.86 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special equipment: Front axle load 9.0 t, Audio system: CD radio (Bluetooth), Right exterior mirror with maneuvering position, 220 Ah battery, CB radio, Aluminum compressed air tank, Additional compressed air tank, Air horn, Electrical pre-wiring in the cab 24V / 100 A, Cab: steel-sprung, Comfort, Suspension: Front springs 9.0 t, 4 leaves, Additional parking brake on the front axle, Vehicle without rear window, 16-speed gearbox - Type: G 280-16, Rear axle differential gear 300, 12.7 cm info display with video function, Interior filter for construction site vehicles, Communication interface, Fuel tank: 390 L, Aluminum, left, Alloy wheels 11.75x22.5 (ALCOA Dura-Bright, on front axle), Alloy wheels 9.00x22.5 (ALCOA Dura-Bright), Air intake behind the cab, Reinforced engine brake, Reinforced engine compartment encapsulation, Auxiliary drive MB 123-10c, Parameterizable special module, Spare wheel, Acoustic reversing warning (external warning signal), Seats in the cab: Driver's seat, sprung comfort seat, Seats in the cab: Driver's seat backrest foldable, Exterior sun visor, Sunshade roller for side window, driver's door, Voltage converter 24V / 12V 10 A, Stowage flap outside left, 12V socket in the co-driver's footwell, Additional 24V socket in the co-driver's footwell, Turbo-retarder coupling, Preparation for reversing camera, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2 - line, Connections left, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air connection in the cab, Cab: Width 2.30 m, Cab: Movable cab entry, Cab: Tilting mechanism hydraulic, Cab: M ClassicSpace, Cab floor with engine tunnel 170 mm, Cab: Mounting height 600 mm, Suspension: Leaf / Air, Power windows, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Manually operated roof hatch (steel), Interior filter: Pollen filter, Body / Superstructure: Tipper, Steering assist pump unregulated, Air compressor 2-cylinder, Heated air dryer, Engine 12.8 L - 375 kW R6 Diesel (OM 471), Frame lowering without bellow residual pressure regulation, Ramp mirrors, Waste heat recovery, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Co-driver's functional seat, Stabilizer front axle, Cab socket 24V, Tachograph / EC control unit, Rear underrun protection fixed, Preparation for toll collection, Front axle straight, Water pump regulated, Permissible gross weight 26.0 t, Oil cooler gearbox * Mileage: approx. 800,000 km * Engine: OM471 Diesel * Power: 375 kW / 510 hp * Displacement: 12,809 ccm * Transmission: Automatic transmission * Retarder: available * Axles: 6x4 * Front: Leaf suspension * Rear: Air suspension * Body: Timber transport / stakes * Body length: 6.20 m * Body width: 2.47 m * Unladen weight: 14,230 kg * Permissible gross weight: 26,000 kg * Technically permissible total mass: 28,000 kg * Payload: 11,695 kg * Color: Black * Emission standard: Euro VI * VIN: WDB9642241L982193 ----* Condition / Note: * ATTENTION!!! Kjdpfxjzu U H Eo Adqedr * The gearbox was removed together with the clutch. * Significant signs of wear were found on the retarder coupling and the retarder gear. Therefore, a repair of the vehicle is necessary. The worn and damaged components can be clearly seen in the photos.---- * TÜV (technical inspection) valid until 09/2026 * First registration: 09/2015

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth Kdedewfhu Hspfx Adqsr ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: used, mileage: 775,382 km, power: 290 kW (394.29 HP), first registration: 02/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 55 m³, loading space length: 7,600 mm, loading space width: 2,460 mm, loading space height: 2,990 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Vehicle No. for customer inquiries: 229 ----Special equipment: * Retarder * Air conditioning * ACC Adaptive Cruise Control * Emission standard EURO 6 * Refrigerator * SoloStar Concept * Airbag, driver's side * Compressed air tank, aluminum * Driver assistance system: Distance control * Driver assistance system: Roll control assistant * Cab: Mounting height 765 mm * Cab: Width 2.50 m * Cab: Tilting mechanism, electro-hydraulic * Cab: L StreamSpace * Cab floor, level * Windshield, tinted with band filter * Sunroof, electric * Upper comfort bunk, wide * Fuel tank: 2x 500 liters, aluminum * Air intake, integrated * Roof fairing (lockable, without base trim) * Engine 10.7 liters - 290 kW R6 Diesel (OM 470) * Fog lights with LED daytime running lights * Reversing warning, acoustic (warning signal outside) * Seats in the cab: Driver's seat, sprung comfort seat, heated * Steel rims 9.00x22.5 (on rear axle) ----Standard equipment: * Axle configuration: 4x2 * Axle load, front axle 8.0 t * Actros 4 * Trailer brake, 2-line * Trailer coupling: Standard Ringfeder D40 * Trailer socket 24V / 15-pole * Audio system: Radio with USB connection * Exhaust, to the right outside * Exterior mirrors, electrically adjustable and heated * Battery 220 Ah * Batteries arranged one above the other * Braking system, electronic (EPB) with ABS+ASR * Differential lock, rear axle * Compressed air unit, high * Driver assistance system: Attention-Assist (fatigue detection sensor) * Driver assistance system: Brake Assist (Active Brake-Assist) * Driver assistance system: Lane keeping assistant * Driver assistance system: Stability control assistant * Cab: sprung, comfort * Suspension: Air / Air (full air) * Window lifters, electric * Generator 100 A * Speed control system (cruise control) * Transmission 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Rear axle, bevel gear 440 * Info display 10.4 cm * Body/superstructure: Chassis * Lower comfort bunk * Comfort locking system * Communication interface * Radiator grille * Steering booster pump, regulated * Air compressor, 2-stage * Engine brake * Engine compartment encapsulation * Ramp mirrors * Waste heat recovery * Transmission Mercedes-Benz PowerShift * Disc brakes, front and rear axle * Seat cover / upholstery: Fabric * Seats in the cab: Co-driver's functional seat * Seats in the cab: Driver's seat backrest, foldable Ksdpfx Adezviu Teqsdr * Voltage converter 24V / 12V 10 A * Splash guard, front * Stowage flap, outside left * Socket, cab 24V * Tachograph / EC control unit * Door extension for the cab * Underride protection, front * Preparation for CB radio * Preparation for toll collection * Front axle, cambered * Water pump, regulated * Central locking with remote control * Permissible gross weight 18.00 t * Auxiliary heater (water) ----Technical data: * Wheelbase: 5,500 mm * Load compartment dimensions: L: 7,600 mm W: 2,460 mm H: 2,990 mm * Payload: 9,760 kg * Tire size: 315/60 - 295/60R22.5 * Tire tread: approx. 10-20% ----German vehicle! * 19,999.- Euro net plus VAT * Technical inspection (TÜV) / emission test 02/2027 / next emission test 08/2026 * In the event of export to third countries or the EU, a security deposit will be retained. This will be reimbursed to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,195 kg, first registration: 08/2026, color: black, number of seats: 8, total length: 5,050 mm, total width: 2,275 mm, total height: 1,998 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Number: CHO26.TM57817 Errors and prior sale excepted! ----LOCATION: 04425 Taucha, Gerichtsweg 4 Ksdpfx Adezvi Nwjqjdr Phone number for inquiries: Mr. Ralph Bergel or bergel(at) ----SPECIAL EQUIPMENT * Trailer hitch, electrically pivoting * Exclusive Package: Panoramic sunroof - Rear seat package 21 (6 rear seats, sliding doors on the right and left, 2nd row with 3 individual seats, outer seats heated, middle seat with a folding table on the backrest, 3rd row with individual seats) - B&O speakers - Ambient lighting * Windows, 2nd row: Opening windows in the side windows * Ford audio system with 13-inch multifunction display and Ford SYNC 4 including navigation - DAB/DAB+ - Vehicle modem - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - Amazon Alexa built-in voice assistance * Fuel tank 70 l * Heated steering wheel * Matrix LED headlights, adaptive - LED low beams including all-weather lights - LED high beams, glare-free - LED daytime running lights including integrated LED turn signals in the front - LED cornering lights, static - Speed-dependent beam range control - LED rear lights * Wheels: Alloy wheels 7.5 J x 19 in sports design in matte black * Parking heater (fuel-fired water heater) with remote control including H7 AGM dual battery * Technology Package 6: Exterior mirrors electrically adjustable, heated and foldable - Blind Spot Assist including CTA with trailer detection - Rear parking assist - Pre-Collision Assist, camera and radar-based - Driver fatigue warning system - Lane keeping assist, lane departure warning, lane change assist, lane centering - Traffic sign recognition - Wrong-way driver warning function - Parking pilot system front/rear - Adaptive cruise control including Stop&Go function - Intelligent speed limiter with speed limit display - 360-degree camera - Steering wheel in Sensico leather-look FURTHER EQUIPMENT * 3 USB ports for the 2nd row * ABS * Airbag, passenger side - with airbag deactivation function - Airbag, driver side - Side airbags - right and left * All-wheel drive * Overhead console * Theft alarm THATCHAM - with interior monitoring in the driver's cab and cargo area including central locking with additional double locking * Diesel particulate filter (DPF) with SCR catalytic converter and AdBlue tank * Vehicle modem - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Front power windows - with quick-up/down function * Parking brake, electric * Ford Key Free System - including Ford Power-Start function * Heated windshield * GT stripes on the hood, the lower front bumper and the tailgate - including side decorative stripes * Glove compartment with lockable lid * Interior lighting in the passenger compartment * Automatic climate control, 3-zone - with automatic temperature control for the driver and front passenger side as well as the rear, separately adjustable - Auxiliary heater, electric - Electric temperature control in the rear * Wireless charging station in the center console, for mobile devices - according to Qi standard * Large center console * Driver fatigue warning system * Emergency call assistant eCall * Picnic light * Tire repair kit * Tire pressure monitoring system * Windshield wipers with rain sensor * Sliding door, with power assist * Rail-based flexible seating system * Fixed side windows, second and third row, right and left * Seat package 19: Driver seat 5-way electrically adjustable - Front passenger indivi

Condition: used, mileage: 22,367 km, power: 90 kW (122.37 HP), first registration: 04/2002, overall weight: 3,500 kg, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro3, loading space width: 1,800 mm, loading space length: 3,250 mm, loading space height: 1,870 mm, Year of construction: 2002, total length: 5,506 mm, total width: 1,998 mm, total height: 2,490 mm, number of seats: 4, Equipment: ABS, all wheel drive, parking heater, Extremely clean and like-new Fiat Ducato 2.8 JTD with Dangel all-wheel drive, differential lock, and low-range gearing. Former reconnaissance vehicle from disaster relief services, with only 22,287 original kilometers. +++ Untouched, original condition with no welding. Features: - 2-seater bench seat, variably mounted on airline rails with large storage compartment – approved for 4 seats - 2 built-in shelving units - Second battery with integrated charger via 220V external power supply - Power inverter - Two sliding windows in the sliding door and opposite, with curtains or roller blind on the sliding door - Small roof hatch - Auxiliary heater - Electric mirrors - ABS, airbag - Rear doors with 270° opening angle - Fog lights - Dangel 4x4 all-wheel drive with differential lock Includes technical conversion to SoKFZ (special vehicle) office vehicle with 4 seats, or as a truck – allowing full tax deductibility for businesses. Special signal devices fully functional, rotating beacon lights with faux leather covers and snap fasteners. Unladen weight: 2,694 kg GVW: 4.0 tons (can be downrated to 3.5 tons without technical modifications) Freshly serviced, including brake fluid change. Continental M+S tires, DOT 2019. Headlight adjustment has been converted from hydraulic hose system to electric actuators. Internal dimensions from partition: 3250 x 1750 x 1850 mm (LxWxH) External dimensions: 5505 x 1998 x 2490 mm (LxWxH) +++ Subject to error, change, and prior sale. Kodpfx Adjyltb Deqedr

Condition: used, mileage: 220,000 km, first registration: 01/2008, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,800 mm, loading space length: 3,300 mm, Equipment: ABS, central locking, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note!!! Sales are preferably made to business customers. Internal ID number: [3443] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German technical inspection) & emissions test * Nationwide delivery * Financing also possible without a down payment * Spring offer: On request and for an additional charge of only €999, increase the trailer load capacity to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * German vehicle * Immediately ready for use * Long flatbed Kdsdpfx Aszhhyxodqjr * Large 2.4-liter diesel engine * Rear-wheel drive * 16-inch tires Special equipment: 2nd battery, radio preparation, 2 speakers, tinted glass Additional equipment: Airbag for driver, turn signal integrated into exterior mirror, tachometer, electronic differential lock (EDS), vehicle without fog lights, heating with recirculation, body/superstructure: standard flatbed, headlight range adjustment, engine 2.4 liters - 74 kW TDCi catalytic converter, flatbed width 2000 mm, flatbed length 2450 mm, production site: Otosan, wheelbase 3504 mm, mud flaps at the front, seat package 21: driver's seat (3-way adjustable) - front passenger single seat (2-way adjustable)----Would you like to lease or finance? We offer attractive deals – also possible without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m.----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle Kodpfxevupr To Adqedr High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: used, mileage: 280,265 km, first registration: 03/2018, fuel type: diesel, fuel: diesel, Year of construction: 2018, DB Sprinter 316 CDI Kiesling refrigerated box van with side door, Thermo King V 300 MX refrigeration unit - in very good condition! • Engine: 2.1 L - 120 kW CDI catalytic converter • Low emissions, compliant with Euro 6 emission standard • 6-speed manual transmission Ksdpfx Aozlxywedqodr • Air conditioning • Braking system with ABS+ASR • Fuel tank: main tank 75 L • Body/superstructure: standard flatbed • Truck registration • Airbag, driver's side • Seat belt system with warning system (driver's side) • Heat-insulating glass • Smoker's package • Front mud flaps • Spare wheel holder under the end of the frame, including jack • Headlight range adjustment • Tire repair kit with compressor • Seats in the cab: driver's comfort seat • Seat cover/upholstery: Lima fabric • Seats in the cab: double passenger seat • Seats in the cab: adjustable passenger seat • Exterior mirrors, electrically adjustable and heated • Exterior mirrors with integrated turn signal • Folding cover for storage compartment • Headliner in the cab • 1 DIN slot in the front under the headliner • Rear wall paneling • Lockable glove compartment • Becker MAP Pilot navigation system • Audio system Audio 15 (radio with color display) • Outside temperature display • Adaptive brake light • Washer fluid level indicator • Assyst maintenance interval display • Front engine drive with bracket for additional coolant compressor • Fuel filter with water separator • Battery 74 Ah • Fleece battery 95 Ah • Battery disconnect switch, 1-pole • Generator 180 A • Reinforced front axle • Reinforced front stabilizer bar • Reinforced rear stabilizer bar • Permissible total weight: 3,500 kg • Unladen weight: 2,610 kg • Payload: 890 kg • Wheelbase: 3,665 mm • Vehicle dimensions: 6,070 x 2,000 x 2,920 mm (LxWxH) • Suspension: Stabilization level II • Tires: 235/65 R16C • Tire tread: 8/8 / 7/8 KIESLING - Deep-freeze box van • Type: Cooler Flitzer • Internal dimensions: 3,310 x 1,850 x 1,900 mm (LxWxH) • Side door on the right • Rear portal doors • Floor: diamond-plate • Lashing rails on the left and right, in the middle • Edge strips at the bottom • Rear steps THERMO KING REFRIGERATION UNIT • V 300 MX • Driving and standby cooling (380 V) - 1st owner! - German vehicle! - MOT / emissions test: new! Subject to errors and prior sale!