Used Peddinghaus 210/13 for sale (12,854)

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 See condition Itjdpfev D Nzysx Amlof

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Itsdpfx Aji Duh Iemlof Weight 2000 kg good condition

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Itedpfxjh Uhb Se Amlsf Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: used, round bar steel 42 mm square edge steel 38 mm Itedpswth N Hjfx Amljf L-beam 110 x 10 mm cutting capacity 150 x 16 mm pressure 60 t hole punching press: throat 370 mm hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t Itodpfecxxrpex Amlef dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: used, functionality: fully functional, Section steel shear and punch type 210/11, 80x8, beam 10 mm, solid material 30 mm, T-section 80x8 Iedpfx Amey Dh Eislstf

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Iedpoy Alq Hofx Amlstf Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm Itodoyh Rnkjpfx Amlof L-beam 100 x 10 mm flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 0,8 x 1,5 m * 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch * 2 foot switches * contact limit stop * various punching saddles

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg Itodscc Ubuspfx Amljf

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Iodpfxswcqmao Amljtf Manufacturer: Peddinghaus Model: 210/25s Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm Itedpfxsvh I T Nj Amlsf no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: good (used), functionality: fully functional, Peddinghaus profile and punching machine with automatic stop Itodpfx Asyg D Nnomljf Very well maintained Punching force 45 t Incl. various punching dies

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm Iodpeit T Hyefx Amletf - weight approx. 1800 kg

Condition: ready for operation (used), functionality: fully functional, Peddinghaus profile steel shears type 210 / 11 Itjdpfx Aev H Ub Remljf Technical details, see photos Accessories: all punching tools, see photo

Condition: used, functionality: fully functional, General Information Manufacturer: Peddinghaus Corporation Model: 210 Type: Hydraulic Ironworker Workstations: Punching, section shearing, flat bar shearing, notching, and round/square bar shearing. Capacity and Performance Punching Capacity: Approximately 55 - 60 tons (US tons). Punching: Typically, a 25 mm diameter hole in 16 mm thick steel. Angle Shear: 90-degree cut: Approx. 100 x 100 x 10 mm. 45-degree miter cut: Approx. 75 x 75 x 8 mm. Flat Bar Shear: Maximum thickness: Approx. 300 x 15 mm or 200 x 20 mm. Notcher: Plate: Approx. 10 mm. Angle: Approx. 75 x 75 x 8 mm. Round and Square Bar Shear: Round bar: Approx. 38 mm. Square bar: Approx. 32 mm. Other Information: Weight: Approx. 1700 - 2000 kg. Dimensions (L x W x H): Approx. 1500 x 800 x 1900 mm. Verify the accuracy of the information with the seller. Iodpfsw Sy Ecsx Amlotf

Condition: used, PEDDINGAUS Type: 210/20 Isdps Dv Nnofx Amlstf EXCELLENT CONDITION

Condition: reconditioned (used), Mechanically overhauled machine with new LTG-StoreControl L control system 2 identical machines available External dimensions: Height 5,450 mm Width 3,380 mm Depth 2,920 mm 60 beams with a payload of 210 kg each with clear usable dimensions: W = 3,050 mm D = 813 mm H from 45 to 750 mm Total machine load capacity up to 2 x 33,650 kg Start of the service opening 900 mm above the top floor, then 800 mm high Itsdpsn D A N Hjfx Amlsf Color: GRAY/BLUE, beams sendzimier-galvanized, surfaces cleaned, signs of wear possible Performance values: Vertical drive 1 x 4 kW / 400 volts Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, displacement volume: 913 cm³, injection pressure: 1,600 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest standards by the manufacturer in 2021! It has not been used since and is therefore in very good condition! Ijdpjyi Ailjfx Amljtf The machine is offered complete with 2 Kistler modules for cavity pressure control! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar spacing (HxV): 670 x 620 mm Mold installation height: 350 mm Platen daylight: 1,100 mm Opening stroke: 750 mm Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free-shot injection rate: 419 cm³/s Barrel heater power: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water supply temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

Condition: used, mileage: 64,000 km, power: 70 kW (95.17 HP), first registration: 07/2012, fuel type: diesel, color: silver, gearing type: mechanical, number of seats: 3, Equipment: ABS, central locking, parking heater, soot filter, Chat via WhatsApp now: Quick and easy contact with our sales advisor. Attention!!! Sale preferably to business customers Internal ID number: [3089] ---Optional extras available: * 12–64 months warranty (valid EU-wide) * New inspection Itodpfxjyhk Rzo Amlsf * New TÜV & emissions test (AU) * Nationwide delivery * Financing possible also without down payment * Spring offer: On request and for an extra charge of only €999, increase in towing capacity up to 3,500 kg (depending on vehicle and manufacturer). ---Vehicle Highlights: * 19% VAT deductible * 2nd owner * Ready for immediate use * Euro 5 standard * Sortimo shelving system Special equipment: Auxiliary heater, 13-pin trailer socket, Audio System Audio 20 (radio with CD player), cargo area ceiling light with door contact, windows for rear doors, fixed window in load/passenger compartment right front, 180A alternator, rear doors (opening angle 270°), wooden floor in cargo area, bulkhead with window, metallic paint, two rotating beacons, interior rearview mirror, artificial leather seats/covers (driver’s cab), passenger double seat, front stabilizer, additional heater fuel sender, plywood lining in load compartment, 95Ah AGM battery, auxiliary hot water heater Further equipment: 3rd brake light, adaptive brake light, driver airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated turn signals, brake assist, braking system with ABS+ASR, cab headlining, lockable glove box, standard box body, child safety locks, 75L main fuel tank, load-securing/tie-down points, headlight range adjustment, engine 2.1L – 70 kW CDI, 3250 mm wheelbase, smoker package, tyre repair kit with compressor, emission standard Euro 5, right side sliding door, driver’s seatbelt warning system, Assyst service interval indicator, heat-insulating glazing, GVW 3.00 t ---Interested in leasing or financing? We offer attractive terms – financing possible without down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ---Notice: All information provided online is non-binding and intended solely for general vehicle description. Errors, typographical mistakes, and prior sale excepted. The binding specification of the vehicle is determined exclusively by the purchase contract on site or by written assurances. We preferably sell vehicles with a mileage over 50,000 km or older than 3 years to our business customers.

Condition: good (used), Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 Ijdpewah Icefx Amljtf -Dimensions: see photos -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face mill -Manufacturer: Seco, Secodex Face milling cutter head without indexable inserts Ijdeu Ribqopfx Amljtf -Type: Secodex R220.13/23-8200-C -Mount: Ø 60 mm / Bolt circle Ø 100 x 18 mm Dimensions: Ø 210 x 60 mm -Weight: 8.2 kg

Condition: used, rubber damper, engine damper, clutch, rubber coupling -Rubber coupling: rubber damper engine damper Itodpfx Amouzn Evoljf -Dimensions: see photos -Total dimensions: 240/210/H130 mm -Weight: 4.5 kg

Condition: ready for operation (used), Bosch Rexroth PCPNL 1070074076-210 MNR: 1070079494-113 Monitor SN: 003750783 SN: 003891569, used, minor signs of wear, 100% functional, scope of delivery as per photos Isdpfx Askxh A Semlstf

Year of construction: 2004, condition: good (used), Manufacturer: KUKA Type: KR 210 L 180 Year of manufacture: 2004 Iodpfxsh Dwxws Amljtf Net weight: 1245 kg The robot is fully functional, tested! Addendum to the measurement report!

Condition: good (used), Year of construction: 2013, functionality: fully functional, cooling capacity: 1,037.3 kW (1,410.33 HP), type of cooling: air, total width: 2,400 mm, total length: 9,900 mm, total height: 2,200 mm, Aircooled chiller RHOSS TCAVSZ21040 1037,3 kW Cooling capacity: 1037,3 kW / 294.9 tons (12/7 — 35°C) Year of manufacture: 2013 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Type of refrigerant: R134A Compressors: 2 pcs. BITZER CSH9583-21Y-40D (screw) Number of fans: 18 pcs. Hydraulic module: 2 pcs. LOWARA FCT4150-250 Dimensions: 9,9х2,4х2,2 m Compressors need to be repaired CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Itsdpfx Amoxzqpvslof