Used Omera R 1600 for sale (68,211)

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Rsdjkvnuuepfx Ablow Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Redpfxeyzbd Tj Ablew

Condition: used, LEUZE CML720i-R05-1600.R/PB-M12 Light curtain receiver Item no.: 50122897 Redpfxoy Suype Abljw

Condition: used, LEUZE CML720i-T05-1600.R-M12 Light curtain Transmitter Item no.: 50119468 Rodpfx Abey Sut Ajljw

Condition: excellent (used), Year of construction: 2016, CNC machining center WAGNER WBE 1600 R Year: 2016 Control: Siemens 840 D Technical data: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 630 mm Table dimensions: 1900 x 700 mm Spindle speed: 8000 rpm SK 40 Videos of the machine available Rodpfx Aey Na Ugsblsw

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Redekvnumjpfx Ablew Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TYPE 63 R4, functionality: fully functional, operating hours: 100 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 63 t, overall weight: 4,600 kg, Equipment: documentation/manual, EECCENTRIC PRESS OMERA Model: 63 R4 Redpoyn Sdpjfx Abljw Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR

Year of construction: 2003, condition: used, OMERA MAXIMUM DIAMETER: 1000 mm Redpfx Aoy Rx D Ajbljw

Condition: excellent (used), Year of construction: 2019, 2 units in stock, both were only in use for a short contract. Loading basket 1600mm by 800mm Programmable controls. Rjdpfx Aeramamjbljw

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm Redpfxszd Tv Re Ablow 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: refurbished (used), functionality: fully functional, load capacity: 10 kg, arm reach: 1,450 mm, controller manufacturer: ABB, controller model: IRC5, ABB IRB 1600-10/1.45 IRC5 Controller - fully refurbished and with 6 months warranty - delivered into Europe duty paid so no additional costs on top Rodpezcfa Tsfx Ablsw

Condition: good (used), functionality: fully functional, Year of construction: 1987, operating hours: 9,999 h, machine/vehicle number: 09.2216, overall weight: 8,300 kg, Manufacturer: Arthur Klink GmbH Type: RSHA 1600 CNC Machine No.: 09.2216 Year of Manufacture: 1987 Connection: 380 V / 50 Hz Connected Load: 20 kW Weight: 8,300 kg Hydraulic Diagram: 09.2216.4 The RSHA 1600 CNC is not a conventional reaming machine for machining workpieces, but rather a grinding or sharpening machine for reaming tools (reaming cutters). This machine is used for: Rjdpozf Ukxjfx Ablow * Re-grinding reaming tools * Correcting chip and clearance angles * Reconditioning worn reaming tools * Repairing reaming tools for internal gears, spline profiles, and special profiles Typical technical data for the Arthur Klink RSHA 1600 CNC Since the exact specifications varied depending on the year of manufacture and customer requirements, the typical data are approximately in this range: Max. reaming tool length approx. 1,600 mm Max. reaming tool weight approx. 100–150 kg Grinding wheel diameter approx. 250–400 mm CNC axes 2–4 axes Grinding process profile and clearance surface grinding Drive power 20 kW Machine weight 8,300 kg Areas of Application The machine was mainly used in: * Automotive industry * Gearbox manufacturing * Gear manufacturing * Toolmaking * Manufacturers of reaming tools

Condition: used, Suitable for steam heating capacity 1.600L. Rjdpfx Abezb Ek Nslew all stainless steel double jacket tiltable drum stirring system with spring-mounted scrapers high pressure steam (max. 10 bar) dimensions (l x w x h): ± 4.000 x 2.000 x 2.300 mm + "Berief" Loader for 200L eurobins, Type L25

Condition: used, functionality: fully functional, machine/vehicle number: 6616465, Year of construction: 2021, operating hours: 5,407 h, load capacity: 2,200 kg, fuel type: electric, construction height: 1,290 mm, fork length: 1,600 mm, empty load weight: 635 kg, drive type: Elektro, Low-lift pallet truck Rjdpexpkxgsfx Ablsw Chassis number: 6616465 Transmission: Electric-AC, stepless Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery type: PzS Description: BT LPE 220 Year of manufacture: 2021 Operating hours: 8,327 The machine is in very good visual and technical condition. Charger available upon request. Subject to errors and prior sale. If you haven’t found the forklift you are looking for, please contact us. We have a large selection of additional machines on site.

Condition: used, machine/vehicle number: 0801674635, Year of construction: 2020, color: other, Year of manufacture: Jan 2020 4 PIECES THE SAME LIKE NEW FROM 0 TO 200 HOURS. Redpfswur Ehsx Ablew

Condition: used, machine/vehicle number: 080167D3928, Year of construction: 2020, color: other, PALLET LIFTER LIKE NEW Rsdpfx Ajwur Euoblew

Condition: excellent (used), Year of construction: 2006, color: other, Empty weight: 500 kg Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Rsdjzfig Uopfx Ablsw If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total length: 600 mm, total height: 780 mm, total width: 1,600 mm, Work table AT 1600 with stainless steel top TOP work table, suitable for catering or bakery use Stainless steel worktop with rear splash guard Dimensions approximately: 1600 x 600 x 780 mm (W x D x H) Used equipment Optional: Delivery service New wheels/castors Come and visit us! Rsdsyhy Nkopfx Ablsw

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total length: 700 mm, total width: 1,600 mm, total height: 850 mm, Work table AT 1600 with stainless steel top and sliding doors Work table, baker's/pastry chef's table with stainless steel work surface and shelf at the back Rjdjzfxykjpfx Ablew sliding doors with intermediate shelf underneath stainless steel design Dimensions approx.: 1600 x 700 x 860 mm, W x D x H Used equipment Come and visit us!

Condition: used, mileage: 48,400 km, power: 55 kW (74.78 HP), first registration: 07/2017, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, color: blue, gearing type: automatic, number of seats: 1, Year of construction: 2017, Equipment: air conditioning, Vehicle No.: 472-25 HAKO CityMaster 1600 REINEX Weed Control with Hot Water/Steam Interchangeable body, winter service possible, hydraulic connections Emission standard: 97/68/EC First registration: 07/2017 * 48,400 km * Engine operating hours: 5,623 h * REINEX HDA/S 100-0207-17 * Hot water burner operating hours: 2,192 h * 100–200 bar in combination with mobile hot water high-pressure cleaner * Steam range: 150°C steam setting with max. 10 bar * Water tank capacity: 1,000 L * Spray lance * Air conditioning * All-wheel drive * Volkswagen 4-cylinder inline engine * 2-speed automatic/hydraulic transmission * Maximum speed 40 km/h * Camera * Wheelbase 1,600 mm * Length / Width / Height: 3,829 mm / 1,200 mm / 1,975 mm * German documents Redpfx Asyadk Sobljw Inspection possible at any time during our business hours, test drives by appointment! For export sales, a deposit will be retained and refunded upon receipt of the certificate of export. Company or advertising logos on vehicles may have been digitally edited in the photos. No guarantee is given regarding the function of accessories. All details without warranty – subject to errors, changes, typos, and prior sale. Vehicle descriptions are expressly not guaranteed characteristics. Please refer to our general terms and conditions and take note of these.

Condition: used, Year of construction: 2010, x-axis 1.600 mm y-axis 815 mm z-axis 700 mm tool taper BT 40 control Siemens Sinumerik spindle tunring speed 10.000 U/min engine 15 KW weight 11.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dividing head, 4th/5th axis - Coolant system - Chip conveyor - Handwheel - Tool changer Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Redpfozd Hfrjx Ablsw Subject to change, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 700 mm, total height: 1,000 mm, total width: 1,600 mm, Mobile workbench AT 1600 with stainless steel top TOP workbench, suitable for catering or bakery use Stainless steel worktop Open underneath / can be painted underneath Reinforced, welded construction Dimensions approx.: 1600 x 700 x 1000 mm, WxDxH Redpfjyhy Hiox Ablsw Used equipment Option: Delivery service New rollers/wheels Visit our large warehouse!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours EQUIPMENT Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): Rodpfx Aboza Urgjlsw TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Workpiece weight max.: 230 kg

Condition: used, Year of construction: 2010, (1) Injection molding machine, Handling: Wittmann | W832-0185 | 2010 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling System 1x Conveyor Belt Rsdpfxjy N R Tyj Ablow 1x Hopper Dryer, company TORO-systems 1x external Hot Runner Unit, company Mold Masters 1x Conveyor Unit, company Motan

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Machine operates independently. Large format. Redpfx Abezdrnrjlow Brushing table. Blasted for 59,000 hours.