Used Norgren 4546666000000000 for sale (18)

Condition: used, 454666600000, NORGREN, dosing cylinder, adhesive cylinder and synchronous motor Godeuz D Ndjpfx Aivobu Model: 454666600000 Condition: Used

Condition: like new (used), INLET 10 bar Max Temp. -10°C...60°C Application: Compressed air systems Width: 70 mm Height: 300 mm Depth: 75 mm Godpfjzcla Tox Aivobu Weight: 726 g Condition: Like new

Condition: like new (used), 0.4–10 bar / Max INLET 14 bar Application: Machinery/equipment from Glaston, etc. Width: 54 mm Height: 54 mm Depth: 133 mm Gjdpoy U E Upsfx Aivebu Weight: 597 g Condition: like new

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Gbedpfsw T U A Sjx Aiveu

Condition: used, Norgren I374997 Technical data: - Condition: As new Gbjdpfjzrxtqjx Aivou

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable Gsdpfx Aozzz N Heivobu - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: good (used), Linear drive, linear gearbox, lifting gear, transfer rail, conveyor rail -Linear drive: with toothed belt Godpeii Sdzsfx Aivsbu -Stroke: 2480mm -Drive shaft: hollow shaft Ø 14 mm -Note: without motor, can be included for an additional charge -Transport dimensions: 2800/150/H135 mm -Weight: 24kg

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Gbodpfjyluicex Aivju Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: excellent (used), Solenoid valve, flap valve, electromagnetic valve, solenoid valve Gjdpfx Aiezzwx Rsvobu Valve manufacturer: Herion, unused -Type: 2323124 -Pressure: 0-10 bar -Connection: 3/4" -Magnet manufacturer: Norgren, type 1310 -Voltage: 230 V 40 - 60 Hz -Quantity: 25 pieces available Price: per piece -Dimensions: 230/125/H100 mm -Weight: 3.2 kg/piece

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 Gbedpfx Aist Hxa Tjvou _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 Gjdsd Hui Hepfx Aivsbu -Stroke: 320 mm -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Godpfx Aisd Hvh Tevsbu -Stroke travel: 60 mm -Piston diameter: 40 mm -Quantity: 5 available Price: per piece -Dimensions: 255/55/H80 mm -Weight: 1.1 kg/piece

Condition: new, connection G 1/4 adjustable from - up to 0,7 - 8 bar weight 0,86 kg high flow pressure regulator body material: zinc alloy withour gauge manual included Gjdpfjd Ih N Sjx Aivobu 10 pieces on stock!

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, round cylinders -Stroke: 400 mm -Piston diameter: 25 mm Gbjdpfx Aisd Hvhvsveu -Number: 2x available -Price: per piece -Dimensions: 580/28 mm -Weight: 0.7 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 260 mm -Piston diameter: 80 mm -Number: 2x available Gbodpfxsd Hvhxo Aiveu -Price: per piece -Dimensions: 610/95/H95 mm -Weight: 6.5 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Gjdpfx Aed Hvh Ejivsbu -Stroke: 150 mm -Piston diameter: 63 mm -Number: 6x available -Price: per piece -Dimensions: 460/75/H105 mm -Weight: 3 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Gjdsd Hvhtopfx Aivebu -Stroke: 115 mm -Piston diameter: 50 mm -Number: 6x available -Price: per piece -Dimensions: 400/65/H90 mm -Weight: 2.3 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 50 mm -Number: 2x available -Price: per piece -Dimensions: 530/65/H90 mm Gedpsd Hvh Djfx Aivjbu -Weight: 2.9 kg/piece