Used Mul 2/8 for sale (91,722)

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. Rsdjr Ix Igjpfx Achecf The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: new, Year of construction: 2025, Log decks for band saws Length 4 - 10 m Height according to band saw height 2, 3 or more chainlines with heavy duty chains Hydraulic or electric gear driven Rcedpfxovt Dk Ij Achsf Hydraulic arm with separator for log landing on band saw table Hydraulic arm length 800 - 1500 mm depending from band saw Hydraulic driven chain on hydraulic arm for log movement

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, No minimum price – guaranteed sale to the highest bidder! The offer includes only the robot without the enclosure! The enclosure can be purchased separately for an additional €3,500! TECHNICAL DETAILS Payload: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Rjdpfx Aozvmm Tjchocf Total weight: 280 kg Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Condition: excellent (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, Used Tornos MultiSigma 8/24 Redpfezpxk Rex Achocf Year 2010 40,000 operating hours Chip conveyor Robobar MSF-522-8 bar feeder, year 2010 Chip conveyor High-pressure pump Kraft and Bauer fire suppression system Machine in very good condition with dual pick-up Set of collets Set of bar feeder channels

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, total width: 1,600 mm, total length: 4,000 mm, total height: 2,600 mm, overall weight: 2,500 kg, year of last overhaul: 2023, We are offering this overhauled Markl Langrohr round filler 8/2 filling machine, year of construction approx. 1990. Markl 8/2 long-tube filler, completely overhauled. Rodsyymgwspfx Achocf Comprehensively refurbished at the beginning of 2023, including a new gearbox. Filling capacity approx. 1,500 bottles/hour, depending on carbonation and temperature. Currently set up for 0.33l bottles. Year of manufacture unknown, approx. 1990. The machine can be upgraded to a total of 16 filling heads. HDE available. Includes rotary table at the infeed side. Outfeed equipped with conveyor belt and collecting table. The machine runs perfectly without any issues. Dimensions (LxWxH): 4,000 x 1,600 x 2,600 mm Power connection: 16 A Weight: approx. 2.5t Additionally included: - Unused conveyor guide, length 160 cm - Conversion kit for filling 0.5l bottles - Large number of spare parts, seals, etc. - 9m new, unused conveyor belt The machine will be available from the end of April! Price: negotiable, €52,000 net

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Max. bar diameter : 20 [mm] - Spindle speeds : 3500 [rpm] - Spindle power : 15 / 18.5 [kW] COUNTER-SPINDLE - Counter-spindle position : 8 - Max. bar diameter : 20 [mm] - Travel : 160 [mm] - Max. part length : 75 [mm] - SLIDES - Number of transversal slides : 3 Redjyt Sl Rjpfx Achecf * Position : 1 / 8 / 9 * Stroke x, position 1 : 50 [mm] * Stroke X, position 8/9 : 65 [mm] - Number of crossed slides : 6 * Position : 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1 : 50 x 80 [mm] - Number of longitudinal slides : 1 * Position : 8 * Stroke Z2 : 160 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9600 x 2500 [mm] - Machine height : 2200 [mm] EQUIPMENT - CNC : FANUC PNC DECO - Chips conveyor - Coolant tank - Bar loader : Tornos

Condition: used, Year of construction: 2008, operating hours: 37,000 h, For sale is an ARBURG ALLROUNDER 630 S 2500-800 ECO injection molding machine from 2008 with extensive automation and peripherals. Manufacturer: ARBURG Type: ALLROUNDER 630 S 2500-800 ECO Year of manufacture: 10/2008 Clamping force: 2,500 kN / 250 t Injection unit: 800 Control system: ARBURG SELOGICA The machine is equipped with an original ARBURG Multilift V select with a load capacity of 15 kg. The system also includes a complete safety enclosure, conveyor technology, and other peripheral devices. The machine is connected to the power grid and is currently in operation in a production facility. An inspection can be arranged by appointment. Technical specifications / Design: ARBURG ALLROUNDER 630 S 2500-800 ECO Year of manufacture 10/2008 Clamping force 2,500 kN / 250 t Injection unit size 800 Spindle diameter: 55mm Control system ARBURG SELOGICA Operating voltage 400 V / 3~ / 50 Hz Control voltage 230 V / 50 Hz Total connected load 81 kW Total rated current 145 A Automation: ARBURG Multilift V select Year of manufacture 10/2008 Load capacity 15 kg Control via SELOGICA pneumatic design X-/Y-/Z-axes complete safety enclosure Rcodpfxszw D Hmo Achjf part removal via conveyor belt Additional equipment / Peripherals: Piovan material conveying unit material hopper conveyor belt additional conveyor belt on the machine side several temperature control / tool circuits ARBURG temperature control unit extensive media connections complete automation cell. An inspection of the machine is possible after prior appointment. Location: Greater Thuringia area _____ In addition, the following machines, not listed here, are also available: DEMAG Ergotech 50-270 – Year 2002 DEMAG ViVa 100-400 – Year 2000 DEMAG Extra 200-840 – Year 2007 DEMAG Ergotech 80-200 – Year 1995 DEMAG Ergotech 80-200 – Year 2001 ENGEL Victory 80/40 – Year 2006 DEMAG Ergotech 35/320-120 concept – Year 2002 _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are appropriate for their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: like new (used), Year of construction: 2022, operating hours: 3,800 h, functionality: fully functional, Year 2022 - 3800 hours MultiSwiss 8x26, 6 Y-axes 8 motor spindles, 11 kW – 8000 rpm max Spindle capacity 26 mm, Z stroke 75 mm (max. workpiece 65 mm) 2 X-slide units in positions 1-8, stroke 80 mm 6 X-Y slide units in positions 2-3-4-5-6-7, X stroke 55 mm, Y +/-16.5 mm Counter spindle 11 kW – 8000 rpm max Z stroke 150 mm, X 170 mm HP ejector adaptation for counter spindle (requires 3010 or 3020) Fanuc 30iB CNC control Redpfxjxrfune Achjcf Integrated PC with Windows 10 operating system 21.5" color touchscreen Independent C axis on each spindle in main and counter operations (requires 0060 or 0065 or 0070 or 0075)

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Number of spindles : 8 - Number of counter-spindles : 1 - Max. part length : 100 [mm] SPINDLES - Max. bar diameter : 22 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 11.2 [kW] Rcedpfezhphwex Achjf COUNTER-SPINDLE - Y stroke : 280 [mm] - Z stroke : 450 [mm] NUMERICAL AXES - 1 cross slide, position 1: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 2: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 3: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 4: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 5: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 6: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 7: x=50 [mm], Z1=80 [mm] - 1 cutting carriage 8: x=65 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.300 x 2.200 [mm] - Machine height : 2.600 [mm] - Machine weight : 12.000 [kg] MACHINE HOURS - Number of hours under power : 73500 [h] EQUIPMENT - CNC : Fanuc 30i-TB - Hirth teeth - 1 counter-spindle in position 7 - Counter-spindle with counter-operation device - 2 x 4 counter-operation tools - 8 spindles with independent spindle speeds - C-axis on all 8 spindles and the counter-spindle : 0.001 [°] - Chips conveyor : MAYFRAN - Coolant tank * with high-pressure pump : 35 + 80 [bars] - Bar loader : ROBOBAR MSF-522/8 - Oil mist extractor

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Number of spindles : 8 - Number of counter-spindles : 1 - Max. part length : 100 [mm] SPINDLES - Max. bar diameter : 22 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 11.2 [kW] COUNTER-SPINDLE - Y stroke : 280 [mm] - Z stroke : 450 [mm] NUMERICAL AXES - 1 cross slide, position 1: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 2: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 3: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 4: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 5: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 6: x=50 [mm], Z1=80 [mm] - 1 cross slide, position 7: x=50 [mm], Z1=80 [mm] - 1 cutting carriage 8: x=65 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.300 x 2.200 [mm] - Machine height : 2.600 [mm] - Machine weight : 12.000 [kg] MACHINE HOURS - Number of hours under power : 75000 [h] EQUIPMENT - CNC : Fanuc 30i-TB Rcsdpfx Aozhph Dechsf - Hirth teeth - 1 counter-spindle in position 7 - Counter-spindle with counter-operation device - 2 x 4 counter-operation tools - 8 spindles with independent spindle speeds - C-axis on all 8 spindles and the counter-spindle : 0.001 [°] - Chips conveyor : MAYFRAN - Coolant tank * with high-pressure pump : 35 + 80 [bars] - Bar loader : ROBOBAR MSF-522/8 - Oil mist extractor

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. Redpfx Aszl Rfxjchocf The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Type: Multicomponent (2K injection) Rcjdpfxeyz Tmys Achef Drive: Hydraulic 2x hydraulic valve

Condition: used, Year of construction: 2008, Motor spindle turning machine: Tornos Type/Model: MultiAlpha 8x20 Condition: used Year of manufacture: 2008 Machine hours: 45017 h Technical data Capacities & travels Bar diameter (round material): up to max. 22 mm (with turned bars up to max. 25 mm) Workpiece length: max. 100 mm Longitudinal travel (Z-axis): 80 mm Cross slide travel (X-axis): 50 mm End units (longitudinal slide): 200 mm Spindle & axes Main spindle: 8 independently driven motor spindles Counter spindles: one counter spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axes: 34 axes Tool slide: 7 cross slides X/Y (position 1 - 7); 1 facing slide X (position 8); 7 longitudinal slides (position 1-7) Drive power & speeds Speed of main spindles: 0 - 8,000 rpm Power of main spindle motor: 11.2 kW Torque of main spindle: 17 Nm (optional up to 25 Nm) Speed of counter spindle: max. 8,000 rpm Power of counter spindle motor: 3.7 kW Torque of counter spindle: 8.3 Nm Rsdpfjzgwp Hjx Achscf Equipment / accessories: Fanuc 30i control system 4x Motoquill 8x Fixed drilling spindle with Modular 40 mount Base holder Göltenbodt (fixed to axes) Knoll system with turbo filter system Manipulator for part handling max. bar diameter Ø 20 mm max. part length 100 mm 1 x Y-axis installable

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Rcodpfjwzyp Uex Achjf Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Max. bar diameter : 20 [mm] - Spindle speeds : 3500 [rpm] - Spindle power : 15 / 18.5 [kW] COUNTER-SPINDLE - Counter-spindle position : 8 - Max. bar diameter : 20 [mm] - Travel : 160 [mm] - Max. part length : 75 [mm] - SLIDES - Number of transversal slides : 3 * Position : 1 / 8 / 9 * Stroke x, position 1 : 50 [mm] * Stroke X, position 8/9 : 65 [mm] - Number of crossed slides : 6 * Position : 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1 : 50 x 80 [mm] - Number of longitudinal slides : 1 * Position : 8 * Stroke Z2 : 160 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9600 x 2500 [mm] - Machine height : 2200 [mm] EQUIPMENT - CNC : FANUC PNC DECO - Counter-spindle with brake - Retractable stop Spindle stop - Chips conveyor - Coolant tank Rcodpfxowuu Rys Achjf * with high-pressure pump * with paper filtering unit - Bar loader : IEMCA PRA 52F / 33

Condition: used, TECHNICAL DETAILS - Number of axes : 23 - Max. bar diameter : 20 [mm] - Spindle speeds : 3500 [rpm] - Spindle power : 15 / 18.5 [kW] COUNTER-SPINDLE Redpfx Acowuu R Hshecf - Counter-spindle position : 8 - Max. bar diameter : 20 [mm] - Travel : 160 [mm] - Max. part length : 75 [mm] - SLIDES - Number of transversal slides : 3 * Position : 1 / 8 / 9 * Stroke x, position 1 : 50 [mm] * Stroke X, position 8/9 : 65 [mm] - Number of crossed slides : 6 * Position : 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1 : 50 x 80 [mm] - Number of longitudinal slides : 1 * Position : 8 * Stroke Z2 : 160 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 80 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9600 x 2500 [mm] - Machine height : 2200 [mm] EQUIPMENT - CNC : FANUC PNC DECO - Counter-spindle with brake - Retractable stop Spindle stop - Chips conveyor - Coolant tank * with high-pressure pump * with paper filtering unit - Cooling unit - Bar loader : IEMCA PRA 52F / 33

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Rcedpfeztyn Sox Achef Electrode force: 235 daN Arm extension: 80-300 mm With synchronous welding control RS 11-2 With main switch

Condition: refurbished (used), Year of construction: 1988, TECHNICAL DATA: Jaw opening 200 x 620 mm Year of manufacture 1988 Throughput capacity - 80 t/h Feed material size 4-70 mm Rodpfxjzc H Raj Achecf Weight 6081 kg Power requirement 90 - 132 kW Special features: Adjustable grinding plates Condition: Refurbished, wear parts replaced, sandblasted, primed, and painted Optional and upon request: Infeed hopper, discharge hopper, motor, frame, V-belt, belt guard, control cabinet with soft starter or frequency inverter, special paint finishes, hydraulic opening mechanism

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). Rjdpoyguk Asfx Achocf #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2004, On request and for an additional charge, loading and transport (throughout Europe) can be arranged. All prices include VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Phone: Mobile: (also via WhatsApp) Web: Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Rodpfsxirqqox Achocf Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2016, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, Rcsdpfsldk R Rjx Achjf counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on or *

Condition: not inspected (used), Year of construction: 2003, turning length: 380 mm, turning diameter: 284 mm, spindle speed (max.): 5,000 rpm, overall weight: 2,300 kg, siemens maximum spindle speed: 5,000 RPM Rcodjx Rbwxjpfx Achof VDI turret, 12 stations tooling chip conveyor

Condition: used, Year of construction: 2019, Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, Rodpfjldk R Hsx Achocf 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on or *

Condition: used, Year of construction: 2008, x-travel 2500 mm y-travel 2500 mm z-travel 1700 mm control Siemens Sinumerik 840 D max. workpiece weight 6000 kg Rcodpfx Ajw N S E Nechjf spindle diameter 130 mm quill stroke 700 mm tool taper ISO 50 DIN 69871 - AD max. torque at the spindle 1847 Nm total power requirement 65 kW weight of the machine ca. 45 t dimensions of the machine ca. 10,9 x 9,3 x 5,7 m Work table -Clamping surface 2500 x 2000 mm -Table height above floor 800 mm Feed speed -x-axis 0.5 to 10000 mm/min -y-axis 0.5 to 10000 mm/min -Z-axis 0.5 to 10,000 mm/min -Rapid traverse (x/y/z) 25 / 25 / 25 m/min -Max. feed force (x/y/z) 28,000 / 27,000 / 28,000 N Spindle speeds in rpm -Gear stage 1: 6 to 1004 rpm -Gear stage 2: 950 to 4000 rpm Equipment/accessories: -Approx. 30 SK 50 tool holders -1 measuring probe -Coolant system/paper belt filter & chip conveyor -Cooler -Oil mist extraction -Fixators -Technical documentation

Condition: used, TECHNICAL DETAILS - bar clearance : 5-20 [mm] Rsdpfx Acjuhaq Uohscf - maxi part length (without counter operation) : 100 [mm] - maxi part length (with counter operation) : 80 [mm] - spindle rotation speed : 5 000 [rpm] - spindles maxi power : 15 [kW] - drilling/tapping maxi power : 3.7 [kW] - number of numerical axes : 23 - number of cross slides : 8 - counter operation slide : 1 - end units : 7 - number of sub-spindle : 1 - sub-spindle motor power : 1.1 [kW] - dimensions : 5880 x 1400 x 1950 [mm] - weight : 7 200 [kg] EQUIPMENT - TORNOS PNC DECO control - HIRTH teeth drum locking - high pressure pump - chips conveyor - turning tools-holders - IEMCA PRA 40/33F bar feeder - number of hours 31600