Used Monforts Monforts Rnc 400 A for sale (77,036)

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. • Swing over bed: 410 mm • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) Hodpey If A Hsfx Abpsp • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) • OPTIONAL: mounts, flanges, and reducer tubes • The tailstock can only be positioned manually, whereas the quill stroke is programmable. • The distance between the face of the chuck and the maximum turning length is approx. 610 mm. • The distance between the face of the chuck and the extended quill tip is approx. 1000 mm. • The distance between the face of the chuck and the retracted tailstock without the quill tip is approx. 1160 mm. Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB Hodpfxjy Ifptj Abpep • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2008, turning diameter 280 mm turning length 600 mm Hodpfxoydfqzo Abpsp Turning diameter: 280 mm Turning length: 600 mm

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Hsdpfx Abjtxquhspep

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Type of control: CNC-Steuerung Control: Monforts Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Hedexmd T Espfx Abpep Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Power Chuck Programmable Tailstock Chip conveyor Hjdpfx Abjyv Ha Ajpsp

Condition: new, For sale: Professional power controller (thyristor-based) Advanced Energy Thyro-A series. The device is NEW – never used (warehouse stock). High-end industrial equipment designed for advanced production installations. 🔧 Technical specifications: Hjdpfx Aoyw T Ipebpsp Manufacturer: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Voltage: 400 V Current: 350 A Output: Relay Out 4A / 250V Type: thyristor power controller (SCR) ⚙️ Applications: industrial furnaces heating systems industrial automation power control in production lines 📦 Included in the set: 3x Thyro-A modules industrial enclosure / heat sink cooling fan full set as shown in photos ✅ Condition: NEW – unused May show minimal signs of storage. Fully functional.

Condition: excellent (used), Year of construction: 2004, Technical data: Maximum turning height: 300 mm Maximum turning diameter over bed: 600 mm Maximum diameter over slide: 500 mm Distance between centers: 1500 mm CNC control: FANUC 21i-TB Revolutions: 16 – 4,000 RPM Spindle motor power: 18.5 / 30 kW 3-jaw chuck: 315 mm Tool changer: 12 stations Hodpfey Ub Ufox Abpjp CE marking Dimensions (length x width x height): approx. 6000 x 2300 x 2100 mm Weight: approx. 7.5 tons Accessories: 12-position tool turret Numerous tools Numerous driven tools Hydraulic chuck with additional jaws Tailstock W+W filter system Chip conveyor The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 Hsdpfx Abexcwdvjpjp The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. All tools and accessories are included. Inspection possible by appointment.

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons Hedozfau Ajpfx Abpsp very good condition

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 538/04, turning diameter over cross slide: 300 mm, turning length: 600 mm, spindle bore: 52 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, quill stroke: 90 mm, torque: 240 Nm, overall weight: 7,000 kg, swing diameter over bed slide: 440 mm, Equipment: documentation/manual, Well-maintained Monforts RNC 500, can be inspected under power. Fanuc 18 i TB control 12 driven tool stations with VDI 40 mount Counter-spindle collet 173 E Main spindle Kitagawa 3-jaw chuck BB 208 Hydrostatic circular guideway FAPT programming system Main and counter spindle Chip conveyor Hjdpoyrbmhofx Abpop Coolant system with flat bed filter Parts catcher with transfer device Ejector in counter spindle Short bar loader Samsys Multi 3000 Reduction tubes Rinse gun C-axis Y-axis Further machine equipment – see photos

Condition: used, Year of construction: 1993, CNC Lathe Monforts RNC 4 with KNCS 260 chuck Collet up to Ø 60 mm Bar feeder up to Ø 65 mm Year of manufacture: 1988 Lots of accessories CNC Lathe Monforts RNC 4 with 15-series control and C-axis, KNCS 260 chuck, year 1995, lots of accessories RNC 5 Chucking-only lathe Year of manufacture: 1992 Includes many jaws Monforts RNC 7 with automatic tailstock, 1500 mm Z-axis travel Driven tools with spindle indexing every 2.5° Chuck 500 mm, many tools and jaws included Year of manufacture: 1993 Hsdpfjyq R T Isx Abpop Very good condition The last CNC lathe, an RNC 7-1000 with automatic tailstock, steady rest, C-axis Lots of tools and jaws Ideally, everything would be sold as a package — 5 Monforts lathes with a very large amount of accessories.

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21320-33176, daxner WM 5-A-A 400 Rotating paddles generate centrifugal force, which presses the material through a stationary screen. Particles smaller than the screen mesh size pass through the screen, while particles larger than the mesh size are discharged via the coarse material outlet. Design: → Stainless steel housing with robust front plates on both sides → Rotor shaft with paddle assembly and ball bearings → Double shaft sealing rings → Easy-to-clean design with removable front plate, including quick-release clamps, safety switch, and tilting mechanism → Connecting set for the inlet pipe with a quick-release fastener → Discharge hopper with a joint for the outlet pipe, including a 90-degree bend → Overflow tank made of shatterproof, transparent acrylic glass (capacity: 4 liters) Hodpfezgt D Tex Abpep → Drive with a 3-phase AC motor, 0.55 kW; 400 V; 50 Hz Output: → Up to 5,000 kg/h of wheat flour at a 2,000-micron mesh width Screen basket: → Nitex, standard 2,000-micrometer mesh → Diameter: 185 mm, Length: 385 mm, or as specified Option: → Optional dust explosion-proof design (ATEX) Material of sieve: stainless steel Material of coarse material outlet: steel coated Inlet: max Outlet: Outlet 2:

Condition: used, Year of construction: 2006, operating hours: 60,000 h, clamping force: 200 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 9,500 kg, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Hedeyzt R Sjpfx Abpep

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Hedpfxsxl Hi Te Abpop terms of payment: 100% prior to delivery

Year of construction: 2009, operating hours: 48 h, condition: good (used), functionality: unexamined, machine/vehicle number: KNI099171, The machine has been stored for several years and was last used some time ago. Its functionality has not been tested, therefore it is being sold explicitly as untested. Visually, it is in used condition, but has always been stored complete and in a dry environment. Hedpfx Abezg U Hpopop Inspection is possible by arrangement. Loading is the responsibility of the buyer.

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Hedpoya Dh Dofx Abpep Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Hjdjzgb Efepfx Abpep Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Keba analog module AM 450/A Kemro K2-400 – suitable for Engel CC200 control - removed from an operational machine - fully functional Manufacturer: Keba Hsdpfew Ah N Sjx Abpjp Type: AM 450/A Kemro K2-400 Manufacturer No.: 054202

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit Hodpfx Abjw Ah N Espsp - removed from running machine - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 manufacturer no.: 054943

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine - fully functionalmanufacturer: Keba Hodpfx Ajw Ah Nlsbpsp type: DI 470/A Kemro K2-400 manufacturer no.: 054943

Condition: used, Keba temperature card TM 450/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine - fully functionalmanufacturer: Keba type: TM 450/A Kemro K2-400 Hjdpfew Ah Nfex Abpsp manufacturer no.: 054492

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Hodpoxf T I Njfx Abpjp Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Hedpfjy S Eygsx Abpop Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: as good as new (ex-display), functionality: fully functional, FRONIUS TPS 4000 ROBOT SET .) Fronius power source (Tps4000) .) Fronius cooling unit (Fk 4000) .) Fronius wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package .) Fronius RCU 5000i .) Interface = INTERBUS RUGGED LINE (Optionally available: Profibus + €800 or Devicenet + €1400, others upon request) Manufacturer's list price: approx. €14,000 net We have €5,990 net - VAT deductible - invoice from the dealer. We always have several devices in stock in a wide variety of configurations. We are happy to receive your inquiries. The prices listed start at €... Prices/offers are customized based on the device configuration. Sample images of the devices. Hedpfowbi E Ssx Abpjp In stock in Vienna, 1230. Pallet shipping available for an additional charge: Austria approx. €180 Germany approx. €210 Europe upon request