Used Mm 2010 Druckstrahlkabine Integrierter Patronenfilter for sale (70,397)

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Rsdpfx Aewc Nrnjhpsu Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: good (used), Containers, transport containers, sea containers, steel containers, ISO containers, material containers Rsdpfxeyv Axhs Ahpsu -Steel container: Material container with wooden floor, lighting and hanging hooks -Container interior dimensions: 2940/2010/H2000 mm -Transport dimensions: 3050/2100/H2140 mm -Transport weight: 560 kg

Condition: good (used), Containers, transport containers, sea containers, steel containers, ISO containers, material containers -Manufacturer: Säbu, steel container material container with shelves Rsdpfsw Tkf Njx Ahpeu -Container internal dimensions: 2920/2010/H2010 mm -Transport dimensions: 3000/2100/H2125 mm -Transport weight: 760 kg

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table -Clamping plate: with support ribs -Clamping surface: 2010 x 4010 mm -Plate thickness: 55 mm -Plate: with support ribs -Number: 1 piece clamping plates available -Price: per piece -Dimensions each: 2010/4010/H350 mm -Weight: 6100 kg/pc. Redpow Hz Rkjfx Ahpsu

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Rsdpfxjxva Udo Ahpju GEBRUIKTE TRAILER BANDEN 425/65 R 22.5 | 12 MM 200 EURO| 6 MM 125 EURO|3 MM 100 EURO| INCL VELG.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Rodpfx Ahsxvbaujpeu GEBRUIKTE TRAILER BANDEN 425/65 R 22.5 8 MM 150 EURO 6 MM 125 EUR 4/3 MM 100 URO INCL VELG.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Rsdjxva Svepfx Ahpsu GEBRUIKTE TRAILERBANDEN OP VELG 10 GAATS VOOR LANDBOUW OF TRANSPORT.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 Rodpfx Aoxvbc Njhpeu New: No GEBRUIKTE OPLEGGER BANDEN 425/65 R 22.5 4/6 MM PROFIEL 100 EURO P STUK VOOR LANDBOUW OF TRANSPORT.

Condition: good (used), T-slot plate, clamping plate with holes, plate field, welding table, welding table -Dimensions: 3012/2010/H710 mm -Panel thickness: 82 mm -Plate: with supporting ribs -Weight: 3370 kg Rsdpfocpc Spsx Ahpsu

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley -Angle iron frame: 90 x 90 x 10 mm -Heavy-duty transport trolley -Load capacity: 1000 kg -Quantity: 1 piece available -Price: per piece Rodpfeb Hw Dgox Ahpou -External dimensions: 1385/2010/H360 mm -Weight: 126 kg

Condition: good (used), Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg Rsdpob Rgyqefx Ahpeu

Condition: excellent (used), V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing Redpfx Aem T Ahljhpeu -V-belt pulley: pulley with 10 grooves, unused -V-belt width: 22 mm -Taper bushing recording: Ø 100 x 100 mm (can be changed) -Dimension: Ø325 x 265 mm -Weight: 66 kg

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 shelves Redpfox D T Uyjx Ahpsu -Width: 935 mm -Depth: 410 mm -Height: 2010 mm -Door: lockable, without key -Weight: 59 kg

Condition: used, Included in the delivery: 01x Pallet rack beam, used Material color: yellow Beam type: 7BB Box profile: 120 x 50 mm Design: End beam Rodpfx Ahjy Nxf Djpou Bracket: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 3,000 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These costs depend on the delivery location and scope of delivery and can be requested from us separately.

Condition: used, Various cantilever racks 4x rack: Dimensions: 6,125 x 2,400 x 3,000 mm Weight approx.: 8,000 kg 2x rack: Rsdpfxjyrq Nlj Ahpeu Dimensions: 5,650 x 2,400 x 3,000 mm Weight approx.: 7,380 kg Static calculations available !! Image 1 shows the rack in its assembled state !! ä19526

Condition: excellent (used), Professional external micrometer designed for precise measurement of diameters, thicknesses, and dimensions of mechanical components. The set is equipped with interchangeable measuring tips and calibration standards, enabling operation within a wide measurement range. Technical specifications: • Manufacturer: HOLEX • Measurement range: 100–200 mm • Reading accuracy: 0.01 mm • Interchangeable measuring tips • Calibration standards included • Wooden carrying case Condition: Used item, in very good visual condition. Completeness as shown in the photos. The mechanism operates smoothly. Normal signs of wear and tear resulting from storage and use. The set includes: • micrometer 100–200 mm, • interchangeable measuring tips, Redpszaf Ulefx Ahpou • calibration standards, • adjustment wrench, • wooden case.

Condition: new, Warehouse stage 4,000 x 10,000 mm, capacity 500 kg / m ² Included in the scope of delivery: 4 stand, on one side of 100 x 100 x 3 mm 2 stand, double-sided 100 x 100 x 3 mm 4 main beam C + 300 x 3 x 3,990 mm 10 crossbar S + 300 x 2 x 4,800 mm 20 mounting bracket 3 cross associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 10.000 mm Floor area: 40 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Rodped Hl Nisfx Ahpju Main beam: C profiles C + 300 x 3 mm Crossbar: Sigma profiles S + 300 x 2 mm Flooring: 38 mm chipboard, one side white Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings, etc. are not included, but can be supplied at an additional cost. (Prices on request)

Condition: new, Warehouse stage 8,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions surface: 8,000 x 5,000 mm Redpfx Aed Htr Hehpeu Floor area: approx. 40 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 6 steel tube supports 100 x 100 x 3 mm 4 main beam C + 300 x 3 x 3,990 mm (perforated) 9 cross bar S + 300 x 2 x 4,800 mm (closed) 18 mounting bracket 3 cross associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Stand either in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (Other colours on request!) Galvanized main and cross members We manufacture the storage platforms to any other desired measurement. Prices on request! Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Condition: new, Warehouse stage 16,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions surface Max: 16,000 x 5,000 mm Floor area: approx. 80 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 10 stand on one side of 100 x 100 x 3 mm 8 main beam C + 300 x 3 mm, L = 3,990 mm 18 crossbar S + 300 x 2 mm, L = 4,800 mm 36 bracket 4 Cross associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Stand either in the following standard colours: RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge) Rjdpfx Ahed Htr Tjpsu

Condition: new, total length: 5,000 mm, total height: 3,000 mm, total width: 4,000 mm, load capacity: 500 kg, Warehouse stage 4,000 x 5,000 mm, capacity 500 kg / m ² Included in the scope of delivery: 4 stand, on one side of 100 x 100 x 3 mm 2 main carriers C + 300 x 3 x 3,990 mm (perforated) 5 crossbar S + 300 x 2 x 4,800 mm (closed) 10 mounting brackets 2 cross associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature Rsdpfx Asd Hl D Dehpou incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm (perforated) Crossbar: Sigma profiles S + 300 x 2 mm (closed) Flooring: 38 mm chipboard, one side white P6 Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost.

Condition: new, total length: 12,000 mm, total height: 3,000 mm, total width: 5,000 mm, load capacity: 500 kg, Warehouse stage 12,000 x 5,000 mm, capacity 500 kg / m ² Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions surface: 12,000 x 5,000 mm Floor area: approx. 60 m ² OK height flooring: up to 3,500 mm (freely selectable) height bottom: OK minus 338 mm net capacity: 500 kg / m ² gleichm.verteilte load Included in the scope of delivery: 8 stand on one side 100 x 100 x 3 mm 6 main beam C + 300 x 3 mm, L = 3,990 mm (perforated) 13 crossbar S + 300 x 2 mm, L = 4,800 mm (closed) 26 mounting bracket 3 cross associations 24 Particleboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material incl. load signs Stand either in the following standard colours: Rjdjd Htr Repfx Ahpeu RAL 7035 light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue (other colours on request) Galvanized main and cross members We manufacture the storage platforms to any other desired measurement. Prices on request. Accessories, such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Runs shelf inspection according to DIN EN 15635 n

Condition: new, Warehouse stage 4,000 x 15,000 mm, capacity 500 kg / m ² Redpfxjd Htryo Ahpeu m delivery are included: 4 stand, on one side of 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6 main carrier C + 300 x 3 x 4.190 mm 15 crossbar S + 300 x 2 x 4,800 mm 30 mounting bracket 4 Cross associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor space: 60 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm Crossbar: Sigma profiles S + 300 x 2 mm Flooring: 38 mm chipboard, one side white Support in the following standard colours: RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings etc. are not included in the scope of delivery. These can be supplied at an additional cost. (Prices on request) Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without the e.

Condition: new, For sale: Robust, precision industrial coupling from the renowned Japanese brand C-max / Fuji Seiko Co., Ltd. Model: 51288015900 Production date: 17.01.2006 The coupling is intended for use in CNC machinery, drive systems, industrial automation, spindles, and rotary axes. Rjdpfjw Rdviex Ahpju Equipped with a four-point mounting flange and sleeve mounting with locating balls. ⸻ Technical data: • Outer diameter: 81.03 mm • Flange diameter (bolt hole spacing): 63.04 mm • Total length: 52.96 mm • Inner sleeve diameter: 31.46 mm • Locating element with groove: 50.75 mm ⸻ Manufactured from high-grade steel, stored as warehouse stock – condition very good, minimal storage marks. Original manufacturer's packaging with Japanese label. /////Price per piece/////

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Rodpfx Aoxld Awohpeu

Condition: excellent (used), For sale: high-end precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 taper, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range of Ø2 mm to Ø32 mm (0.079” – 1.260”), allowing for the highest accuracy in machining industrial components, moulds, and technical parts. 📌 Technical Specifications: • Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France • Taper: SK40 – DIN 69871 • Adjustment range: Ø2 – 32 mm • Adjustment accuracy: 0.01 mm / 0.0004” • Precision micrometric scale with clear graduation • Set includes head + holder + KOMET tool • Condition: used, in very good technical condition – ready for work Redpfx Asxizcvehpou ✅ Advantages: • High adjustment precision – ideal for hole finishing • Robust industrial construction – long service life • Compatible with CNC machines and conventional milling machines with SK40 taper • Micrometric diameter setting with μm reading • Ideal for industrial applications, toolrooms, and precision manufacturing