Used Maka Pm 270 R for sale (69,663)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Laodpfxsvmywqo An Usb Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Laedpfx Anovmpx Rs Ueb Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. Lajdpsy Tvggefx An Ujb HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Lodpey Rh Nzjfx An Uoab Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: good (used), functionality: fully functional, mileage: 48,000 km, power: 121 kW (164.51 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 06/2024, next inspection (TÜV): 05/2028, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, all-season tires, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, truck registration, Citroen Jumper extra-long and high roof! Large diesel engine with 165 hp clean new TÜV inspection new maintenance Laodpfx Aoy H Dg Ujn Usb Air conditioning, Bluetooth, navigation, cruise control, cargo area conversion, 270° rear doors, camera and more. We are also happy to offer you financing!

Condition: used, Year of construction: 1999, Used MAKA KPF 334 RT 5-Axis CNC Machining Center Year of Manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for machining deep-drawn parts. Compact design with control cabinet integrated into the base frame. Equipped with automatic central lubrication and a control cabinet with air conditioning unit. Model/Version: Gantry-type machine with two aluminum tables Axis Data: Axis: Size / Travel / Speed X-Axis: 2,750 mm / 40 m/min. Y-/V-Axis: 2,400 mm / 40 m/min. Z-Axis: 700 mm / 15 m/min. Rotation Axis: 540° / 10,000°/min. Swivel Axis: 200° / 10,000°/min. Machine connection: Voltage: 400V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35° Air pressure: 6 bar Working areas / workpiece cube dimensions: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Y-axis: 1,000 mm Z-axis: 400 mm These specifications are based on a fixture height of 170 mm / tool length of 60 mm. 1 Equipment 1.1 Table design Two aluminum surface tables with threaded bushings for mounting, each measuring 1,000 x 1,000 mm. The tables can be coupled for machining large components. Both table tops are also equipped with threaded bushings and centering bushings (or dowel pins) to accommodate the customer's milling fixture, as specified. 1.2 Vacuum supply Machine equipped with a vacuum system. 1 Vacuum Pump 1.3 Clamping System 1 Vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Plug-in couplings mounted on the machine table. 1.4 Milling Unit: 1 DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (infinitely variable speed), air-cooled. A-axis 540° (rotation axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis Drives Ball screw in the X/Y and Z axes; A/B axes with hollow shaft drives. Ledpfev S Ut Dsx An Ueab 1.6 Work Safety 1 sliding door per table, automatically opening. Includes protective cabin. 1.7 Control System 1 BWO 900 machine control unit with 1 BWO 900C control unit, mounted on a mobile control panel. 1.8 Mains Voltage The machine is equipped for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Frequency: 50 Hz The use of residual current protection in the machine supply line is not permitted. 1.9 Country Specification Technical machine documentation in German. Consisting of: - Operating instructions for the machine - Operating instructions for the control system - Electrical and pneumatic circuit diagrams - Control system language in German.

Condition: used, Year of construction: 2007, Truck loading crane / loading crane / crane PM series 12.5 Year of construction: 2007 2x hydraulically extendable Equipped with remote control. With 5th function and rotator. Lasdpfx Answx Etao Ueb Capacities: 2710 kg at 4.2 meters 1800 kg at 6.1 meters 1310 kg over 8.1 meters Cevoman bvba. Lenskendijk 5 2200 Herentals Belgium

Year of construction: 2005, condition: ready for operation (used), A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible. Lsdpfxevmq Tvj An Ueab

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with control cabinet integrated in the base frame. CNC control BWO 900C, memory 1 MB, in integrated PC. Lodpfsir Aq Tox An Ujab Technical data: Working areas / cube dimension: with tool length 130 mm and -Ø 60 mm X-axis: 1.000 mm Y-axis: 1.000 mm Z-axis: 300 mm, with 120 mm fixture height A-axis: 540 B axis: 200° (+/- 100°) Rapid traverse speed: X/Y axis: 45 m/min. Z axis: 15 m/min. A/B axis: 10,000 °/min. 1 piece high-speed milling spindle HSD 6,8 kW, speed infinitely variable from 2,000 - 24,000 1/min, nominal power from 12.000 1/min. With ceramic bearings, air-cooled. Tool holder SK 30 with tool changing device. 1 piece travelling drum tool magazine for 10 tools up to Ø 60 mm and - depending on the tool diameter - 130 mm length from face contact. Aluminum table top 1.000 x 1.000 mm with grid holes 1 piece vacuum pump 54 m²/h, 1 x vacuum clamping circuit Automatic central lubrication, control cabinet with air conditioning unit. Working safety: Sliding door for front loading, protective cabin for the rear of the machine, with side access door, the cabin is open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz. It is not possible to use a residual current device in the machine supply line. Operating temperature: 10 - 35° C Pneumatic: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the delivery. Second-hand machine, without any guarantee and warranty.

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Laodpfx Anjgiwl Do Ujb Available immediately

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 2,200 mm, workpiece width (max.): 800 mm, workpiece height (max.): 40 mm, stroke length: 150 mm, machine/vehicle number: 52850199, TECHNICAL DETAILS Maximum plate size: 2,200 x 800 mm Maximum plate thickness: 40 mm Maximum stroke: 150 mm Working pressure: 6 kg/cm² Total working pressure: 160 tons Ledpfxsy Tn R Rs An Uoab MACHINE DETAILS Total power: 17.3 kW Heating power: 13 kW Voltage: 380 V Current: 35 A Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,800 x 2,100 mm Weight: 5,900 kg EQUIPMENT Heating 8 cylinders, each with a diameter of 100 mm Heating boiler included

Condition: excellent (used), Year of construction: 2014, Ref:11081 . 2014 Kolbus DA-270 Casemaker For high-speed production of hard book covers, Lever Arch files and games boards. Comprising: ‘Co-pilot’ system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board magazine feeders Central soft spine feeder with double reel holder for auto-splice and cutter for waste *Special board centre strip cutting device Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit with pre-melter* Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals. N.B. Compressed air and water supplies to client’s account. Accessories: Board centre-strip cutting device for cutting rigid centre board strips to width, with possible width variance from product to product for digital book production. ° Board sheet thickness max. 2 mm ° Width max. 1,500 mm | height min. 140 mm | max. 390 mm ° Board centre-strip max. 7 mm | max. 60 mm Kolbus ECK standalone corner cutter to work with case maker Specification: Size of opened case, Max: 670 x 390 mm Min : 205 x 140 mm Centre strip width : 6 - 90 mm, thickness 1 – 4 mm Lsdoyzy Rropfx An Ujab Joint width : 4 - 15 mm Turn-in width, closed : 8 – 15 mm Output, variable : up to 65 cycles/min Floor space : L: 6700 x W: 3000 x H: 2,200 mm Electrical loading : 15 kW (3ph, 400V, 50 Hz) Air requirement : 33 Nm3/h 6 bar.

Condition: used, maximum load weight: 22,725 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 04/2023, next inspection (TÜV): 04/2027, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2023, SOR 2-AXLE REFRIGERATED TRAILER, GALVANIZED CHASSIS, STEERING AXLE, 270 HIGH, 250 WIDE Body: Refrigerated transport Date of first registration: MOT valid until: - Make and model: SOR Iberica SOR-S2E, built by Burgers Dimensions (L x W x H): 1350 x 250 x 270 cm (internal) Unladen weight: 8,275 kg Payload: 22,725 kg GVW: 43,000 kg Refrigeration unit: Carrier Vector 1550, diesel and electric Operating hours: 26 hours Tail lift: None Suspension: Air suspension Axle configuration: Number of axles: 2 Lift axle: Yes, axle 1 Steering axle: Yes, axle 2 is mechanically steered (Tridec) Axle make: BPW with disc brakes Tire size: 385-55-22.5 Rear axle 1: Tread depth left: 80%, tread depth right: 80%, Michelin Rear axle 2: Tread depth left: 80%, tread depth right: 80%, Michelin Extras: Fully galvanized chassis, fully insulated cargo box, Carrier Vector 1550 refrigeration unit (diesel and electric), Temperature range from -30 to +30, flower-width loading space, 270 cm internal height, 4 rails on the ceiling, 1 horizontal securing rail, 1 lift axle, mechanically steered 2nd axle (Tridec), Dynamic Ramp Protection, various additional lights. VERY WELL-MAINTAINED REFRIGERATED TRAILER WITH STEERING AXLE AND GOOD INTERNAL DIMENSIONS. HAS ONLY DRIVEN 45,000 KM AND THE REFRIGERATION UNIT HAS ONLY RUN FOR 26 HOURS. AVAILABLE FOR IMMEDIATE DELIVERY AND USE. Further information: * Unladen weight: 8275 kg * Tire size | Front axle: 385/55 R22.5 * Tire tread depth inside left | Front axle: 80% * Tire tread depth inside right | Front axle: 80% * Maximum axle load | Front axle: 9000 kg * Tire size | Rear axle: 385/55 R22.5 * Tire tread depth inside left | Rear axle: 80% * Tire tread depth inside right | Rear axle: 80% * Maximum axle load | Rear axle: 9000 kg * Position | Front axle: Rear * Lift axle | Front axle: Yes * Position | Rear axle: Rear Further equipment: * Rear doors * Homepage * Steering axle * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly ask you to inform yourself in advance about the costs and procedures in your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Lajdpfx Ansy Sdupo Usb Subject to changes, prior sale and errors.

Condition: used, FOREST-LINE SERAMILL V3 270 2T is a gantry milling machine designed for high-precision machining, high accuracy and process reliability. Working capacities: 2 tables (table lengths 3000 mm and 4000 mm, widths 2000 mm), X axis 5000 mm (with 1 table), Y 3400 mm, Z 1250 mm, A axis ±135°/2.5° and C axis 360°/2.5°; distance between columns 2700 mm, table load max. 10,000 kg. Main specifications: spindle nose SK50, spindle speeds 10–6000 t/min, spindle motor 31 kW, spindle torque 430 Nm, total power required 90 kVA; feeds 1–30,000 mm/min on X/Y/Z; rapid traverse X 30’000 m/min, Y 40’000 m/min, Z 30’000 m/min; voltage 3x 400 V 50 Hz. Equipment: tool magazine 120 places, tool holder 700 pce, automatic tool setting BLUM, touch probe M&H. Delivers tight tolerances and is suited to automotive, aerospace, machine tool, medical and watchmaking sectors. Ledsy T N Ttjpfx An Uoab

Condition: used, axle configuration: 3 axles, first registration: 11/2010, loading space length: 7,900 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 12,460 mm, total width: 2,600 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: white, Year of construction: 2010, Equipment: ABS, tail-lift, Axle configuration Tyre size: 385/65R22.5 Rear axle 1: Tyre tread: 40%; Reduction: single reduction Rear axle 2: Tyre tread: 40%; Reduction: single reduction Rear axle 3: Tyre tread: 50%; Reduction: single reduction Weights Unladen weight: 9,220 kg Payload: 30,280 kg Gross vehicle weight: 39,500 kg Functional Tail lift: DHOLLANDIA Body manufacturer: Heiwo Condition Damages: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and uphold the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands Lasdpfx Ajy Twwton Usb - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 11/2010, loading space length: 7,900 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 12,460 mm, total width: 2,600 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: white, Year of construction: 2010, Equipment: ABS, tail-lift, Axle Configuration Tyre Size: 385/65R22.5 Rear Axle 1: Tyre Tread: 40%; Reduction: single reduction Rear Axle 2: Tyre Tread: 30%; Reduction: single reduction Rear Axle 3: Tyre Tread: 50%; Reduction: single reduction Weights Unladen Weight: 9,220 kg Payload: 30,280 kg Gross Vehicle Weight (GVW): 39,500 kg Functionality Tail Lift: DHOLLANDIA Body Manufacturer: Heiwo Condition Damages: none = Company Information = Lajdpfx Aoy Twwgjn Uob Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of pre-owned trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet today’s requirements, and adhere to the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 9349-0010, functionality: fully functional, Used: rotary hearth furnace / mandrel hardening press Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Laedpfx Ajw Rrxfsn Usb Year of manufacture: 2012 Max. temperature: 950 °C GAS

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00594, load capacity: 270 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/270F manufactured in 2016.10. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Lajdpey Nc A Hjfx An Ujb Model: R-2000iC/270F Model Number: A05B-1337-B201 Year of Manufacture Robot: 2016.10 Warranty term (months): 12   Payload (kg): 270 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1320   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.10 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: used, mileage: 572,540 km, power: 199 kW (270.56 HP), first registration: 08/2010, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, color: blue, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 7,680 mm, loading space width: 2,460 mm, loading space height: 2,690 mm, Year of construction: 2010, Equipment: air conditioning, electric window regulation, spoiler, tail-lift, Tyre size: 315/70R22,5 Suspension: air suspension Rear axle: Double wheels Drive: Wheel Empty weight: 7.312 kg Carrying capacity: 11.688 kg GVW: 19.000 kg Tail lift: D HOLLANDIA, slider lift Lajdjwczl Hjpfx An Ujb = Additional options and accessories = - Roof spoiler

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Manufacturer: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Lodpfx Aowm Iz Asn Ueab Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Lasdpfx Anoyiz U Ts Uob Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Condition: ready for operation (used), CMC MTE2620-169BF PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Laodpfji D Hn Aox An Ujb

Condition: ready for operation (used), Rexroth MSK070C-0450-NN-M1-UP0-NNNN 3-phase synchronous PM motor, serial no. according to photo, used, good condition, 100% functional, scope of supply according to photos Lodpfx Aji D Nngjn Usab

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Laodpfx Anei D Hnmj Ujb

Condition: used, mileage: 262,724 km, power: 199 kW (270.56 HP), first registration: 08/2005, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: intarder, color: white, gearing type: mechanical, number of gears: 8, suspension: steel-air, loading space volume: 13 m³, Year of construction: 2005, Equipment: electric window regulation, General information Applicable material: Fuel Laedpfxjy Ndb Dj An Usb Drivetrain Drive: Wheel Axle configuration Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.740 kg Carrying capacity: 11.660 kg GVW: 19.400 kg Functional Make of bodywork: MAGYAR Number of compartments: 4 = Additional options and accessories = - PTO