Used Llc Evolutioner Metal Fence Roll Forming Line for sale (51,274)

Condition: new, Year of construction: 2024, Soffit panel roll forming line was designed by our company to produce wall soffit panels with different lengths. Line has automatic system so you can put length of panels and numbers you need and machine will produce it in automatic mode and cut it automatically. Machine has special cutting shear to cut panels as well. Line can be equipped with manual or automatic decoiler as an option. So it can be effective solution for soffit panels production Hnodorqg U Dopfx Aatjr

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Hnsdstp H Erspfx Aatsr Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Hsdpfoxghngox Aatjnr Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Hnodpfxowwip Ao Aatjr Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, functionality: fully functional, Fiber Laser Cutting Machine for Sheet Metal – Different Sizes & Laser Powers Description Industrial CNC fiber laser cutting machine for high-speed and precise cutting of sheet metal. Suitable for general metal fabrication as well as production of HVAC components, ventilation parts, electrical cabinets, machine enclosures, brackets, roofing and facade elements and other sheet metal products. The machine can be configured individually according to the customer's required working area, material type and cutting thickness. Suitable materials: Carbon / mild steel Stainless steel Galvanized steel Aluminum Brass Copper Standard configuration example Working area: 1500 × 3000 mm Laser power: 1500 W Cutting thickness: approx. 0.5–10 mm, depending on material and cutting conditions Positioning accuracy: up to ±0.01 mm Max. idle speed: 80–110 m/min Acceleration: up to 1G Cooling: water cooling Cutting gases: oxygen / nitrogen / compressed air Power supply: 380 V, 3 Ph, 50/60 Hz File formats: DXF, PLT, AI, NC and others Other working areas and laser powers available Depending on the production task, machines can be supplied with different working areas, including: 1300 × 2500 mm 1500 × 3000 mm 1500 × 4000 mm 1500 × 6000 mm 2000 × 6000 mm 2500 × 6000 mm 2500 × 12000 mm 2500 × 14000 mm Available laser powers include approximately: 1.5 / 2 / 3 / 6 / 8 / 12 / 20 / 30 / 60 kW, depending on machine configuration. The catalogue includes large-format systems up to 2500 × 14000 mm and laser sources up to 60 kW. Higher laser power allows processing of thicker material and/or significantly increases cutting speed on thinner sheet. The required laser power is selected according to steel grade, maximum thickness, required cutting speed and cutting gas. Available configurations Open single working table Exchange table Fully enclosed machine Large-format cutting machine Automatic loading/unloading Dust and fume extraction Automatic lubrication Different laser powers and table dimensions Applications Hnjdpfx Ajztx Epjator Ideal for sheet metal processing, HVAC and ventilation production, steel fabrication, machinery manufacturing, electrical enclosures, construction components, metal furniture, roofing and facade production. The machine can be integrated with press brakes, guillotines, roll forming machines and other sheet metal processing equipment. SEO Keywords fiber laser cutting machine, CNC laser cutter, sheet metal laser cutting machine, metal laser cutter, steel laser cutting machine, fiber laser 1500W, 3000W laser cutter, 6000W fiber laser, 12000W laser cutting machine, high power fiber laser, large format laser cutting machine, sheet metal cutting machine, CNC metal cutting machine, industrial laser cutter, galvanized steel laser cutting, stainless steel laser cutter, HVAC laser cutting machine, metal fabrication equipment, 1500x3000 laser cutter, 2000x6000 laser machine, 2500x12000 laser cutter.

Condition: new, Year of construction: 2026, Automatic Slitting & Cut To Length Line Coil Slitting and Cut To Length Production Line for Sheet Metal Processing The Automatic Slitting & Cut To Length Line is designed for longitudinal slitting and cross cutting of sheet metal coils into strips and flat sheets with programmable lengths. The production line combines several operations in one compact system: Coil feeding Slitting Precision leveling Servo length measuring Cut-to-length part Finished sheet conveying Automatic stacking The machine is suitable for processing galvanized steel, pre-painted steel and other coated sheet materials used in HVAC production, roofing, facade systems, roll forming and general sheet metal fabrication. Main Features Combined slitting and cut-to-length production Fully automatic operation Hydraulic cutting system Precision sheet leveling Servo-controlled length measurement PLC controlled production Touchscreen operator interface High production accuracy Compact machine layout Reliable industrial construction Material Processing Suitable materials include: Galvanized steel (GI) Hnsdpfjzrwhmox Aatjr Pre-painted galvanized steel (PPGI) Coated sheet steel The slitting section is equipped with hardened tooling designed for accurate strip production. The slitting system provides accurate strip widths with stable cutting quality during continuous production. The production line is equipped with an automatic hydraulic cut-to-length system. Typical cutting tolerance: ±2.5 mm for sheet lengths up to 5000 mm ±3.0 mm for sheet lengths between 5000 and 10000 mm Drive System The roll forming and feeding system is powered by: Main motor: 4 kW Hydraulic power unit: 3 kW Power transmission: Chain drive Industrial gearbox Heavy-duty mechanical transmission Control System Technical Specifications Parameter Specification Machine Type Automatic Slitting & Cut To Length Line Material GI / PPGI Maximum Coil Width 1000-1250 mm Material Thickness 0.25–0.1 mm Minimum Slitting Width 60 mm Heavy-duty 120 mm shaft diameter Maximum Number of Slitting Knives 5 Production Speed 10–15 m/min Main Motor 4 kW Hydraulic Power 3 kW Cutting Accuracy ±2.5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Cutting Type Hydraulic Cut To Length Transmission Chain Drive Machine Structure Wall Plate Frame + Column Cutting Structure Machine Dimensions Approx. 2500 × 1500 × 1400 mm Electrical Supply 380 V / 50 Hz / 3 Phase The production line is suitable for manufacturing: HVAC duct blanks Ventilation components Roofing sheets Wall cladding panels Roll forming blanks Sheet metal parts Laser cutting blanks Press blanks Electrical cabinet panels Industrial sheet products Advantages Slitting and cut-to-length in one production line Compact machine footprint High processing accuracy Low maintenance requirements Fast production changeover Automatic sheet stacking High productivity Reliable hydraulic cutting Precision leveling Suitable for continuous industrial production Standard Equipment Depending on customer requirements, the production line can be supplied with: Manual decoiler Hydraulic decoiler Double decoiler Coil loading car Protective film laminating unit Different slitting knife configurations Increased material thickness capacity Different coil widths 1.5 m conveyor table 3.0 m automatic stacking system

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Hnjdpfsuzv Tzex Aater Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Hnjdpfxjf Eywws Aater Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Hsdpfxjrklxvo Aatsnr Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. Hnedpfx Aaolwt Adeter To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. It’s also possible to roll the window drip cap on the machine in two steps.

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Hnedpfsm Twnlox Aatsr Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: used, Year of construction: 1996, type of input current: three-phase, sheet thickness (max.): 1 mm, total width: 2,000 mm, total length: 20,000 mm, total height: 1,900 mm, shaft diameter: 40 mm, input voltage: 380 V, working width: 300 mm, input current: 40 A, spindle motor power: 15 W, coil weight: 1,500 kg, overall weight: 10,000 kg, We are offering this used Dallan T4R-10-300 punching and profiling line / roll forming machine, manufactured in 1996. Manufacturer: DALLAN Type: T4R-10-300 Serial number: 964310.30 Year of manufacture: 1996 Machine specifications: Sheet width: max. 300 mm Sheet thickness: ± 0.5 – 1.5 mm Number of stations: 16 Number of cassettes: 5 Configuration: Double coil, rolling, punching module, roll forming line (16 stations), flying shear Roller diameter: 40 mm Hnodpfoztcgqox Aatsr Punching unit: 8 punching units Coil: Double coil (rolls max. 1,500 kg) Current configuration: Omega profiles Dimensions: 20 x 2 x 1.9 meters Weight: ± 10,000 kg If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, Profiling machine Hnodpfx Aoztkw Doater

Condition: ready for operation (used), Year of construction: 1993, A Dreistern roll forming machine is offered. Main drive power: 9.2kW, production direction: right to left, roll shaft diameter: 30mm, roll shaft connection: 20mm, tooling width of roll stand type 1: 135mm, center distance of type 1: 130mm, adjustment range of type 1: 60mm-100mm, tooling width of roll stand type 2: 210mm, center distance of type 2: 260mm, adjustment range of type 2: 80mm-130mm, control system: Siemens SIMATIC HMI. The gearbox has been fully overhauled. Inspection by appointment is possible. Hnedszta Edepfx Aatsr

Year of construction: 2025, condition: used, functionality: unexamined, Complete Automatic Roll Forming Line (fully compatible with all Unistrut products) Year of manufacture: 2025 Model: CIRF-2019-2486 Unistrut 41 x 41 and 41 x 21 profile Hedpfxjzc Hkgo Aatsnr Approximately 15 meters per minute UK / Irish wiring standard (UK wiring schematics, safety pull cord system around main beds) with 2-ton de-coiler 3-stage, 3-ram punching unit (Hole Size: Approx 12mm × 25mm / Hole Spacing: Approx 50mm centers) Fully automatic upstroke shear Auto Hydraulic Logo printer/stamper Discharge table Overall Length: Approximately 30 meters

Condition: excellent (used), We are selling a Schlebach EHA eaves bracket unit here. The machine is in top condition and functions perfectly. Prices are net. Delivery is possible. You will receive a proper invoice with VAT shown. Please also take a look at our other machines! Hnsdpfx Aezt Rh Aoatsr

Condition: excellent (used), We are offering a Schlebach RBM circular arc forming machine for pre-profiled blades, ready for immediate use. It is the “Porsche” among profiling machines. Delivery is possible. For more information, please send me a WhatsApp message or call me. Net price plus VAT. An invoice with VAT shown is available. Hodpfx Aozq R Hgeatenr

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Hsdpoyw Rzajfx Aatenr Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: excellent (used), A roll forming line with rollers for cold rolling office and storage cabinet fronts made of cold-rolled sheet metal. Roller center distance: 140 mm, Roller diameter: 45 mm, Keyway: 12 mm. The system features an electric mechanism for moving the roller sets apart by up to 1500 mm. The system is electrically operated. Hnjdswxv H Dspfx Aater

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1895, SWAH SLV-3 – Corner Insertion Machine A specialized, highly efficient pneumatic/electric machine designed for the automatic insertion and clamping of corner pieces into rectangular duct flanges (TDC/TDF/Slide-on profiles). Manufactured by the European specialist SWAH, the SLV-3 significantly speeds up the final assembly of rectangular ductwork while ensuring rigid, airtight joints. Specifications • Manufacturer: SWAH s.r.o. (Czech Republic) • Model / Typ: SLV-3 • Year of Manufacture: 2001 • Serial No.: 1895 • Application: Fast and automated press-fitting of metal corners into rectangular ventilation ducts. Hnedpfxozbipvj Aatsr • Voltage: 400 V • Current: 1.1 A • Machine Weight: 96 kg Key Features & Components • High-Speed Assembly: Eliminates manual hammering, allowing the operator to lock ventilation corners into the profile in seconds with consistent, high-quality results. • Heavy-Duty Pressing Mechanism: Delivers a secure, tight seal between the duct profile and the corner piece without deforming the sheet metal or damaging the zinc coating. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Hnsdpfsu A U Utsx Aator The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.

Condition: used, Year of construction: 1982, sheet width 480 mm plate thickness 3 mm stations 13 weight of the machine ca. 11 t dimensions of the machine ca. 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Hedpfx Aaoyqtx Hjtenr More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, sheet width 400 mm plate thickness 3 mm stations . System with the best coiler, straightener, eccentric press, and profile rolling machine Cutting-off system and numerous accessories Iron double coiler Type SFD 2000 Schleicher straightener Edelhoff AZR 3/100 eccentric press Press force 100 t Stroke adjustment 20-110 mm Ram adjustment 100 mm Ram strokes 105 /min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hnedpfxeyq Sx Ee Aatsr If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 7 mm, total width: 1,700 mm, total length: 31,000 mm, total height: 2,000 mm, input voltage: 400 V, working width: 1,250 mm, coil weight: 5,000 kg, overall weight: 8,800 kg, T20 Trapezoidal Sheet Roll Forming Line for Sale Hnsdpozhip Iofx Aator * Model: T20 Trapezoidal Sheet Roll Forming Line * Year of Manufacture: 2018 * 5-ton hydraulic decoiler included * Automatic stacker at the end of the production line The machine has seen very little use and is in excellent working condition. It has been well maintained and is fully operational. The production line is currently dismantled, making it ready for transport. If you need any additional information, photos, or videos of the machine in operation, feel free to contact us.

Condition: used, Year of construction: 1990, HEAVY DUTY ROLL FORMING LINE 9 STATIONS WIDTH: 450 mm Hsdsymzxyjpfx Aatjnr