Used Lisec 2-Component Extruder, Polysulphide for sale (80,755)

Condition: excellent (used), Year of construction: 2006, 2-component extruder Originally built for Silicone, but used for Polysulphide Can be easily made to work with Silicone Hydraulic More technical information can be found attached as Tech. data file Excellent condition Good working order, tested Ljdpjzdyvwefx Amrjac As is Available immediately

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Lasdpfx Ajzabnzemrjc Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: excellent (used), Year of construction: 2004, clamping force: 1,000 kN, Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Lodpfxjvt Rwuo Amrjac Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE without hopper

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.261, Like-new 2-component mixing and dispensing system Mur.Tech KMD-3000 V2 (year of manufacture 2026), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material feed thanks to an eccentric screw pump. This V2 version is additionally equipped with container heating (30–150 °C per container) and vacuum degassing of the materials – ideal for temperature- and bubble-sensitive applications. Highlights: - Modular design: complete material flow path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material temperature control throughout the entire material path - Material change in just a few minutes – almost no material loss Laedpey Txfxsfx Amrec - Stator change with only 3 screws – service without production downtime - Pinch valve and mixing tube change without tools in seconds - Lightweight mixing head made of carbon / aluminum / GRP – ergonomic - Swivel arm for fatigue-free handling (robot mount can be retrofitted) - Mobile thanks to the roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V2, year of manufacture 2026 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, stepless Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, capable of withstanding overpressure and vacuum, with electric inclined blade stirrer Container heating: heating jacket per container, temperature range 30–150 °C Material degassing: vacuum pump, both containers can be switched (individually with full performance or simultaneously with half performance) Mixer: static or dynamic possible Operation: gun or touch HMI Control: Beckhoff IPC with 15.6" touch HMI Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Level monitoring of the material containers - Clogging monitoring - Condition monitoring of the pinch valves - Flow measurement and bubble detection Discharge methods: continuous, pulsed, by weight Connection: 400 V / 16 A, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Data logging: Recording and saving the potting data in the Mur.Tech Cloud is possible upon request. The analysis over a longer period helps to improve efficiency and to detect maintenance cycles early. Connection to the company network is possible both wirelessly and via cable. Application areas: adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of delivery: system, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: spare parts supply and service by the original team. Sold as seen, with exclusion of all warranties. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Bi-component extruder Polyurethane Hydraulic Very good and clean condition As is Laedpfsy Uhy Usx Amrec Available immediately

Condition: like new (used), Year of construction: 2024, functionality: fully functional, The machine is being sold because the business division is closing down. Ledpfx Aey Ez H Ajmroac

Year of construction: 2004, condition: excellent (used), Twin-screw extruder Rollepaal T-REX 2-90-30 Application PVC PIPE The extruder is in very good condition and ready for operation. Location: Germany:D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Lsdpfx Aexcp T Nomroac The extruder is my property

Condition: excellent (used), Year of construction: 2005, operating hours: 4,108 h, functionality: fully functional, machine/vehicle number: 591343, clamping force: 1,550 kN, An injection molding machine of the Ferromatik brand and type K-TEC 155 S / 2F is for sale. The machine is in very good condition. Please note the low operating hours of only 4,108 h Technical data: Laodpjt Tdptefx Amrec Year of construction: 2005 Clamping force: 1,550 kN Clear column distance (H. x V.): 500*500 [560*560] mm Mold opening stroke: 650 mm Platen distance max.: 950 [1150] mm Tool installation height: 300 [500] mm Opening force: 86 kN Screw diameter 1: 50 mm Screw diameter 2: 40 mm Injection pressure max.: 1568 bar Max. stroke volume: 314 cm³ Electrical connection: 40 kW Machine dimensions (L x W x H): 5,500 x 1,700 x 2,400 mm Weight: 7,800 kg Oil tank capacity: 480 l On request, loading onto trucks and transport throughout Europe can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2003, condition: good (used), For sale is a 2 component injection molding machine brand Arburg and type 420 C The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Lodslwxpijpfx Amrjac Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Power supply: 24 VDC Application: Lisec machines (AKL) Width: 425 mm Height: 160 mm Laedpfezcvd Nex Amrsc Depth: approx. 30 mm Weight: 1402 g Condition: good, second-hand

Condition: good (used), Version includes key switch Laedpfx Amszb Enherjc Application: Lisec machines Width: 425 mm Height: 30 mm Depth: 160 mm Weight: 1096 g Condition: good, second-hand

Condition: used, Year of construction: 1999, Good Lisec extruder. Laedpfx Aszavm Ejmrsc Year: 1999 Condition: as is.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 30,500 mm, total width: 4,000 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, space requirement length: 305,000 mm, space requirement height: 3,800 mm, Equipment: documentation/manual, Lisec IG line, year 2005/2007, running direction left to right, featuring maximum element dimensions of 4000 x 2500 mm, stepped units (front/rear/top 140 mm) with gas filling press and sealing robot: - RTVN-32/25WE, inlet conveyor of washing machine, year of manufacture 2007, 3.2 m - RTL-25VN, washing machine with 6 brushes for Low-E glass, with hot water tank, sand filter and blower, partially overhauled, built in 2007, 3.3 m - RTVN-16/25ST, washing machine outlet conveyor, built in 2007, 1.6 - RSVN-38/25, frame set section, 3.8 m - RTVN-27/25, measuring zone for gas-filling press, built in 2005, 2.7 m - FPS-36/25US, argon gas-filling press, built in 2005, 4.1 m - RTVN-11/25ST, outlet conveyor 1 of gas-filling press, year of manufacture 2005, 1.1 m Laodpozfy Uvjfx Amrjc - RTVN-11/25ST, outlet conveyor 2 of gas-filling press, year of manufacture 2005, 1.1 m - APKV-4/25, combination of 4-track cork applicator and short-inlet conveyor if sealing robot with width scanning device for glass/frame, year of manufacture 2005, 1.6 m - VFL-1D/25, sealing robot for PS and SI (can seal unit with 2 different kinds of material), year of manufacture 2005, 8.0 m - DOS-1PS+SI, year of manufacture 2005 (located in front of the line, so does not count towards the total length) The total length of the line is around 30,5 m The machines are in very good condition and are available from our stock in Austria/Hungary. Gas filling press can be seen in our warehouse in Austria but the washer is currently still under reconditioning in Hungary.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total length: 43,000 mm, total width: 4,000 mm, total height: 2,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec insulating glass line 4500 x 2000 mm, year 1989/2007, consisting of following machines: Laodpfsza Hckex Amroc - AKL-20V, edge grinding machine - RTVN-27/20WE, washing machine inlet conveyor - RTL-20B, washing machine with 6 brushes for low-e, including a sand filter and a hot water tank as well as a blower - RSV-38/20, frame set section - PSL-35/20V, assembling station - RTVN-16/20MZU2, measuring section for gas filling press - FPS-35/20U2B, gas filling press for Argon, can do assembling of 4,5 m long units, gas filling up to 3500 mm length - RTVN-11/20, outlet conveyor of gas filling press - UKL-35/23VA, tilt table for line discharge of 90° - KFL-35/22, horizontal glass conveyor - RTVN-16/20VFE, short inlet of sealing robot, including measuring device for glass and frame - VL-1N/20, sealing robot, including option for triple units - DOS-1PU, dosing and metering station, modified to PS - VLA-25/20, extension of sealing robot The machine is in very good condition and will be available by the end of June 2026.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 12,100 mm, total width: 2,300 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Lisec gas filling press FPS-36/25US, year 2005, consisting of following components: RTVN-27/25MZ, measuring section for gas filling press FPS-36/25US, gas filling press for Argon RTVN-32/25ST, outlet conveyor 1 of gas filling press Lodszbdbmspfx Amroac RTVN-22/25ST, outlet conveyor 2 of gas filling press RTVN-16/25ST, outlet conveyor 3 of gas filling press The line machine was working until dismantling date and will be available from current location end of June 2026.

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press) Laedotxinaepfx Amrjc

Condition: used, Year of construction: 1995, System with inlet and outlet sections. Ljdpfxowkh U Do Amrjac Max. glass height: 2500 mm. Total length: 6200 mm. Max. Height: 3840 mm.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 9,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1D/25, year 2005, working direction left/right, consisting of following: - APKV-4/25, combination of inlet conveyor of sealing robot, with glass and frame measuring device and automatic 4-lane kork application machine, year 2005 - VFL-1D/25, sealing robot, including options for triple units (2 sealing cycles), , with Beckhoff PC and Lenze servo drives - DOS-1PUD + SID, material dosing for Polysulfide (base 200 litre, catalyst 20 litre) and Silicone (base 200 litre, catalyst 20 litre), year 2005 Laodpfx Aoy Ub Swjmroc The machine will be sold as described above, EXW our warehouse in Austria. No further guarantee or warranty given. Available End of May 2026

Condition: good (used), Year of construction: 2002, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device Ljdpfx Amjy Uaxperjac LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria and can be seen there on appointment.

Condition: good (used), Year of construction: 2007, functionality: fully functional, total length: 33,300 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Insulation glass production line for Low-E glass LiSEC – Austria, h=2.00 m with Gas Press, Sealing Robot, … Glass dimensions: max. 3500 (4500) x 2000 mm Year: 2007. In good condition. Inspection during production is possible by appointment. 1. AKL, vertical edge deletion system for coated glass sheets, 2. RTL-20B (2003), washing and drying machine, 6 brushes, 3. PSL-35/20V (1989), automatic assembly station for insulating glass, Lasdsy R Tc Hopfx Amrsc 4. FPS-35/20U2B, gas filling press, 5. UKL-35/23VA, tilting table 6. KFL-35/22, horizontal roller conveyor 7. VFL-1D/16 + DOS (PS), automatic sealing system / robot with dosing unit, 8. A complete set of appropriate transport stations (inlet and outlet).

Condition: good (used), Year of construction: 2003, functionality: fully functional, automatic Lisec butyl application machine LBH-25AS, additionally to standard frames also useable for Georgian bar frames, consisting of: - RFVS-25/25, inlet conveyor - LBH-25AS, automatic butyl application machine - RAVS-25/25, automatic frame lift Laodpfey T Ivmjx Amrjc - FRS-25A, automatic overhead frame conveyor As a completion to a full automatic spacer frame butyl application line we also have following machines available: - RFVS-25/25U, inclination changer from +6° to -6° - A2RL-25/25RN, year 2001, full automatic desiccant filling machine for profiles with 6-24 mm width All machines are available from our stock and can be seen in our warehouse in Hofkirchen/Austria

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 1989, working order. Ledjy T Ipmopfx Amrsac For butyl application of spacer widths from 6-24 mm butyl storage cylinder 2 x 7,5 kg The machine will be available end of May 2026

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 4,000 mm, total width: 1,500 mm, total height: 3,600 mm, working height: 2,500 mm, input voltage: 400 V, overall weight: 2,700 kg, type of input current: AC, full-automatic Lisec desiccant filling machine A2RL-25/25RN, year 2001 technical details: min spacer width: 6 mm max spacer width: 24 mm max spacer size: 2500 x 2500 mm Lsdpfx Amjrtm Sasrjac min spacer size: 400 x 400 power supply: 3x400VAC/50Hz control voltage: 24VDC The machine is in very good condition and can be seen in our warehouse on appointment. 1 special trolley for full-automatic frame support will come with the machine (2 more are available on request as an option)

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: Lsdpfor Iil Ejx Amrsac RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) Lsdpfjy Sv Sgjx Amrsac - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) – RSVN-38/25A, frame set section, year 2001 – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary