Used Landreko Sbm-90-13 for sale (19,655)

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 90l / 450 kg Degree of cleaning: SA-3.0 (deep and widespread corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 22 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 110 kg The compressed air blasting machines of the SBM series are mobile machines designed for advanced surface treatment with compressed air jets and abrasive media grains. The advantageous conical bottom design facilitates abrasive movement and, combined with the option to use various valve types, makes the abrasives suitable for processing all types of abrasives with spherical, round, and/or angular shapes and any grain size. Nledewrzbgopfx Amneb The blasting units of the SBM series can achieve a surface quality up to class SA-3/SP5 and a capacity of up to 106 m2/h. SBM series sandblasters are equipped with large claw couplings, ensuring quick and safe connections while maintaining high compressed air throughput. The abrasive is loaded via a pneumatically operated rubber membrane - eliminating the need for inefficient screw connections - which makes the SBM series blasting units safer and easier to operate. The blasting device is also equipped with a large inspection valve that allows for quick tank emptying and the possibility of internal inspection. The SBM series blasting machines allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric versions) is intuitive and precise, making it efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an additional option). The tank of the SBM blasting unit has been designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU, based on and under the supervision of a design approved by a notified body, and is CE-marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 60l / 300 kg Nlsdpswrza Nefx Amnsb Degree of cleanliness: SA-3.0 (deep and extensive corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 19 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 65 kg The SBM series compressed air blasting machines are mobile devices designed for advanced surface treatment using a stream of compressed air and abrasive media. Thanks to the advantageous conical bottom design to facilitate abrasive movement and the possibility of using various valve types, the machine is suitable for processing all types of abrasives with spherical, rounded, and/or angular shapes and any grain size. The SBM series blasting systems can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, ensuring quick and secure connections while allowing high compressed air throughput. The abrasive loading is performed by a pneumatically operated rubber membrane—without the need for inefficient screw connections—which makes the SBM series blasting systems safer and easier to use. The blasting unit is also equipped with a large inspection valve that enables quick tank discharge and allows for internal inspection. The SBM series blasting units allow for simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting unit (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an optional extra). The SBM blasting unit container was designed and manufactured according to the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 30l / 150 kg Cleaning degree: SA-3.0 (deep and extensive corrosion) Air demand: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Working temperature: -20 - 100 °C Cleaning performance: up to 16 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 45 kg The SBM series compressed air blasting systems are mobile machines designed for advanced surface treatment using a compressed air jet and abrasive grains. The beneficial conical bottom design facilitates abrasive movement and the possibility to use different valve designs makes the abrasives suitable for processing all types of abrasives with spherical, round and/or sharp-edged shapes and any grain size. The blasting systems of the SBM series can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, which ensure quick and safe connection while maintaining high compressed air throughput. The abrasive loading is carried out by a pneumatically operated rubber membrane - without the need for inefficient screw connections - making the SBM series blasting systems safer and easier to operate. The blasting unit is also equipped with a large inspection valve, enabling quick emptying of the tank and the possibility of internal inspection. The blasting machines of the SBM series allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning directly can interrupt the operation of the machine, as required by the latest health and safety regulations (solution available as an additional option). The SBM blasting unit container was designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE-marked. Nlodpfx Ajwry R Tsmnsb

Condition: good (used), Flange connection, V-flange, pipe coupling, weld reducer, reducer, clasp end, pipe bend, weld bend, pipe angle Nlsdpfx Ajq N E Rbjmnob -Pipe bends: 90° welding bends, 13 pieces -Type: RP CH WPD 139.7x4 30360 9 pcs. -Type: SF RO EN2 A... 139.7x4 P235 GHTC1 4 pcs. see photos -Price/Sale: complete -Stock: other sizes/types also available, please inquire. -Transport dimensions: 1200/750/H140 mm -Weight: 78 kg with pallet

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: Njdpfsfh Tmmsx Amnelb - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, Ostas 3-roller round bending machine SBM 1070 x 90 Description Asymmetrical 3-roller round bending machine with motorized drive hardened rollers Nljdpfx Ajd Rw Rcsmnsb Upper roller can be swivelled out Conical bending device Footswitch Technical details Sheet width: 1070 mm Sheet thickness: 2.5 mm Roll length: 1070 mm Roller diameter: 90.0 mm smallest bending diameter: 135.0 mm Engine power: 1.1 kW Dimensions L-W-H: 1350 x 760 x 1250 mm Weight: 350 kg

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm Nlsdsdx R Tfspfx Amnjb - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: new, Technical specification: - chamber volume: 1300 litres - Power supply: 230V ~ / 50Hz - Nominal working pressure: up to 10 bar Nledsft Sqqspfx Amnsb - Cleaning capacity: up to 20 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 2,300 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR x 2 - Dimensions of the working area: 1 200 x 1240 x 700 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 300 kg - Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: Powder coating - Working temperature: 10 to + 50 degrees Celsius - Shared work table: Yes - Inspection valve: Yes - Weight: 350 kg The offer includes: - Land Reko SCI-1300-10 Chamber cleaner - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal x 3 - Pneumatic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs

Condition: used, High-voltage tester, high-voltage testing device, high-voltage tester for HV, PE, IS measurement Testing console, testing station, measuring station, testing device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The PE/IS/HV / 91-3J.3 device is used to measure voltage strength, insulation resistance, and the voltage drop of the protective conductor in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The SHV 16 / 90-1V.3 device provides a highly stable DC voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground potential and can be set to a maximum of 300 V. Serial No.: Year of manufacture 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Nsdpfx Amod Dc Unsnelb Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact, on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices are available under storage numbers 57820 and 57821.

Condition: new, Heidenhain ERA 4800C 5000 R20 A3908 graduation drum ID 533903-73, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Nljdpfx Amei Eahbonsb

Condition: used, Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Nedpfxek Aa I Ne Amnjlb Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: like new (used), Grote 613-90 slicer Nsdpjizxfqofx Amnelb Serial: 1081458 stainless, variety of slicing applications including bulk slicing, stacking and shingling into portions, ideal for meat, cheese, vegetables, fruits and bread products, up to 90strokes per min, variable slice thickness 0.5mm - 12.7mm, cutting area 330mm x 152mm, with mesh outfeed, 1Ph

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp, rail holder, galvanized yellow -Type: 1508 -Dimensions: see photos -Quantity: 64 pieces available Price: per set Nedpfjwca D Iex Amnslb -Dimensions: 90/70/H135 mm -Weight: 1.3 kg/set

Condition: good (used), Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holder -Mounting bracket: Type H7 125.1-150 -Recording: MK5 -Tool: 90° / Ø 130 mm -Dimensions: Ø 130 x 375 mm Nedpfx Ajwa Nuwomnslb -Weight: 9 kg

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Nledpfof Axn Ajx Amnob Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: new, empty load weight: 625 kg, maximum load weight: 675 kg, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, loading space volume: 6.7 m³, color: silver, construction height: 2,480 mm, working width: 1,920 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, with DOORS, refrigeration unit = Arktik 1600 N, sandwich walls, * IMMEDIATELY AVAILABLE * with DOORS, refrigeration unit = Arktik 1600 N, sandwich walls Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1,300 kg - Unladen weight: 625 kg - Payload: 675 kg - Interior dimensions: 250 x 135 x 190 cm (L x W x H) - Overall exterior dimensions: 391 x 192 x 248 cm (LxWxH) - Loading sill height: 55 cm - Tyres: 185/65 R14 steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Walls: Thermo sandwich body 40mm - Roof material: Thermo sandwich body 40mm - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional retrofitting in lashing rail - Rear door: yes - Tailgate: no - Tailgate material: Thermo sandwich 40mm - Tailgate/door function: Refrigerated compartment press lever lock - Clearance dimension rear door/flap: - - Interior light: 230V interior light - Supports: yes 4 pieces - Overrun device & brake: yes, Alko - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Overrun device from ALKO - Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door retainer - Rear frame and frame profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - 1800 watt cooling capacity at a cold room temperature of +6 C and an ambient temperature of 30 C - Temperature control range from +2 C to +10 C - Evaporator air volume flow 750 m2 - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing light - Large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - 100km/H approval with wheel shock absorber - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Nljdpfxeu Hruxe Amnsb

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.1 kg Nljdov Ac Tyepfx Amnsb

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Nljdpfxev Ac Uke Amneb -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/75/H130 mm -Weight: 4.8 kg

Condition: new, Year of construction: 2025, Plate dimensions 3000x1350 mm Daylight opening 400 mm Number of daylights 1 St. Heating 31,5 kW Nlodpfxjyk H Ste Amnob Specific pressure 2,5-5,0 kg/cm² Total pressure 90 t Motor output 1,5 kW Dimensions (L/W/H) 3480x1500x2000 mm weight of the machine ca. 5000 kg

Condition: new, Year of construction: 2025, Technical data: Suction capacity 510 l/min. Filling capacity 400 l/min. Maximum pressure 10 bar Tank capacity 90 l Cylinder/stages 2/1 Speed 1.300 min/1 Motor power 3 kW/ 400 V Nodpfohk Dfksx Amnolb Description: The universal with V-belt drive and qualitative equipment especially suitable for craftsmen for use where compressed air quality, durability and efficiency are essential long life thanks to high performance low speed units safe transport and excellent stability thanks to large wheels with parking brake Optimum cooling thanks to large fan impeller aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air better efficiency due to optimised aggregates Standard with: Condor pressure switch Pressure gauge Pressure reducer with water separator and Rectus quick coupling Motor with overload protection Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Küenle Antriebstechnik ZG 1 DK 90 S 4 gear motor SN:3099341341, used, normal signs of use, 100% functional, scope of delivery as per photos Nljdjudgh Eepfx Amnsb

Condition: like new (used), Year of construction: 2021, operating hours: 967 h, functionality: fully functional, machine/vehicle number: 90135010410, total length: 4,300 mm, total width: 2,070 mm, total height: 3,040 mm, overall weight: 9,000 kg, hopper volume: 3,000 l, rotational speed (max.): 10 rpm, blade width: 40 mm, torque: 40,000 Nm, power: 88 kW (119.65 HP), rotor width: 900 mm, input voltage: 400 V, type of input current: three-phase, control cabinet width: 300 mm, control cabinet length: 900 mm, control cabinet height: 900 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, Schomberg twin-shaft rotary shear ES 90/135-D with base frame, hopper and Siemens S7 1212C control cabinet. Powerful 88 kW metal shredder for scrap processing, plastics recycling, or waste treatment. Nodew E H Npepfx Amnolb

Condition: new, A huge stock of spare parts for Poreba lathes: TR55, TR70, TR70B, TR80, TR90, TR90B, TR100B, TR115, TR135, TR135B, TCC125, TCA125, TCA 160, TCG125, TCG160, TCG200, TPC90, TRP110MN, TZG250, TNA90N and many more. - wheels, shafts and gears - toothed racks - lead screws with nuts - cross slide screws with nuts - electromagnetic clutches and brakes, brush holders - pumps, filters, motors Nsdev R Uauepfx Amnelb - steady and movable rests - tailstock sleeve - tool post - lathe chuck Ask for more.

Condition: used, Year of construction: 2020, Transnorm spiral helix belt curve conveyor left 90°-1300-1100 IR900 - Showroom machine RA2319 Technical data: Frame width (NB): 1300 mm,1450 mm with Motor belt width (GuB): 1100 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 500 mm / 90° = 2000 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2020 Incl. supports, current height from 300mm to 800mm Nodpfxjvadkuo Amnelb Optionally available: adjustable up and down with frequency converter Supports, if deviating from the currently installed Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2003, condition: used, Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Make: AMI Nljdotug S Dopfx Amneb Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, Height 500 mm (top edge of rollers) Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics