Used Kverneland Dg 12000 for sale (1,211)

Condition: used, Year of construction: 2008,

Condition: used, Year of construction: 2017, working width 4 m Number of gangs . 0 Number of folders 2 0 Hodpfx Ajyv Iu Ujagonl Number of rollers 1 St.

Condition: good (used), functionality: fully functional, Year of construction: 2010, working width: 3,000 mm, color: red, Hello I have for sale Kverneland EG 85 Vario 6 skid plow on 300 head, the machine in continuous operation, below its parameters: Distance between bodies (cm) 85 Head 300 Type of protection Non - Stop (spring) + additional Casing plowing width (cm) 30 - 50 cm Clearance under the frame (cm) 70 - 75 c Number of bodies 6 Hnjdpjuaziisfx Aagjl I invite you to purchase.

Condition: used, Year of construction: 2008, Support axle cat. 3 Support wheel and transport wheel 26x12 Model EG 100/300/77RH / Hydraulic cutting width adjustment Strip body no. 30 Maize inserter / Straw insertion plates Disc coulter Overload protection with additional spring leaves / Hnjdpfx Aotia Dbjagsl

Year of construction: 2023, condition: used, Field of application: Grounds care Tyre size: - Drive: Wheel Power: 3 kW (4 HP) Empty weight: 490 kg Top speed: 24 km/h Serial number: L4MCUCM47PA000041 Hjdpfx Aaetr Tazogonl Transport dimensions (LxWxH): 2.43x1.16x1.8 Please contact PFEIFER GROUP for more information

Year of construction: 2023, condition: used, Field of application: Grounds care Tyre size: - Drive: Wheel Power: 3 kW (4 HP) Empty weight: 490 kg Hsdpfx Aotr Tbqjagsnl Top speed: 24 km/h Serial number: L4MCUCM46PA000046 Transport dimensions (LxWxH): 2.43x1.16x1.8 Please contact PFEIFER GROUP for more information

Year of construction: 2002, condition: good (used), Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length Hnodpfxjkvnc Se Aagel 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, pivoting range: 360 °, Welding manipulator SARTORE - PTA 12000 MACH-ID 9321 Make: SARTORE Type: PTA 12000 Year: 2011 Hedpox H Rhxsfx Aagsnl Vario matic Rotation / Angle Remote control with Dro Very littles used incl. 2000 mm false chuck  CE-Marked  Table Ø: 2000mm Table load on 50 mm: 12000 Table load on 200 mm:10000 Table load on 400 mm:6600 Table load on 600 mm:4500 Table load on 1000 mm:3500 Rotation table: 360° Lifting chuck: 0 - 135° Table rotation: 0,02 - 0,4U/mm Length: 2980mm Width: 1980mm Height: 1800mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2022, machine/vehicle number: 0102-260011, Kaltenbach KBS750 DG Bandsaw Line with T14 transport system Kaltenbach KBS 750 double mitre horizontal bandsaw with LS270 NC cross-cut fence and T14 transport system in steel trade version - operation and programming are carried out at the control panel. This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful bandsawing machine that is ideally suited for sawing sectional steel such as horizontal double T-beams, L-steel U-steel, flat material and rectangular tubes. KALTENBACH KBS 750 DG band saw Semi-automatic two-column bandsaw for sawing profiles with double miter swivel device. Hedpfx Aoy Rimueagsnl Technical data Cutting capacity: with 90° saw cut 750 mm × 500 mm +70°: 730 × 500 mm -70°: 710 × 500 mm +60°: 670 × 500 mm -60°: 650 × 500 mm +45°: 550 × 500 mm -45°: 520 × 500 mm +40°: 500 × 500 mm +30°: 390 × 500 mm Technical data: Min. profile cross-section: 10 × 10 mm Saw blade dimensions: 6990 × 41 × 1.3 mm, type bimetal M42, Z3/4 Drive power: Saw with frequency control: 5.5 kW Hydraulic unit (4.9 l/min): 1.5 kW Cutting speed: 15-100 m/min, continuously adjustable from the control panel Feed: work feed: 0-300 mm/min Fast forward and return: 2500 mm/min Working height: 640 mm Compressed air connection: 6-8 bar Air consumption: 500 NL/min (according to DIN 1342) Saw weight: approx. 3200 kg Saw dimensions: 3230 × 1160 × 2420 mm Electrical system: Version according to EN 60204-1 Mains connection: 3 phases + N + PE / 50 Hz Power consumption: 17 kVA Fuse protection: 35 A Machine equipment Kaltenbach KBS 750 DG Very robust two-column guide for maximum precision. Inclined saw arm for higher performance and accuracy. Automatic table lowering during material transport Infinitely variable speed control via frequency converter. Hydraulic belt feed, manually adjustable NC-controlled angle adjustment with absolute value encoder Automatic cycle: Clamping - sawing - unclamping Horizontal clamping device: Fixed front stop, opposite clamping block via cylinder. Manually adjustable pressure reduction. Vertical tensioning device: Directly next to the belt; manually adjustable pressure. Backlash-free linear guides. Automatic adjustment of the belt guides Automatic cutting pressure control Remote diagnosis possible (telephone line required by customer) Hydraulic belt tensioning with electronic monitoring Automatic release at standstill Automatic stop in the event of belt breakage Micro-spraying system for clean operation and long service life Integrated chip container Separately driven chip brush Electronic slip monitoring Hydraulic heating

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis TRAUB TNC 65 DG was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system TX8i with 64-bit RISC high-performance processor and additional PLC high-performance processor, integrated PC • TX8i control with 64-bit technology including TFT color flat screen and electronic handwheel • Electrical system according to VDE/EN 60204 • Multi-range transformer for 460V / 400V / 380V / 220V / 200V, 50 Hz • Operating voltage machine 400V 50 Hz • Operating voltage accessories 230V 50 Hz • Control voltage 24V DC • Machine equipped with interference suppression set for industrial networks (EMC compliant) • CE conformity declaration and CE marking • Designed for machining metals and plastics with defined cutting edge • Main spindle C-axis (numerically controlled turning and positioning device) • Counter spindle C-axis with speed-synchronous control • Tool drive turret 1: power 3.1 kW, speed 4000 rpm • Tool drive turret 2: power 3.1 kW, speed 4000 rpm • Tool monitoring TX8i with wear and breakage control via axis motor monitoring • Thread cutting without compensating chuck • Software TRAUB Polyform for milling programming with C-axis (front, longitudinal, cylindrical surface) • Network connection preparation with Ethernet interface and RJ45 socket Hodsy Sg Nijpfx Aagsnl • Z/V axis counter spindle software with defined end position (plan surface transfer) • Maximum clamping diameter up to 60 mm depending on system Additional equipment • Workpiece unloading device with gripper in turret 2 (automation) • Chip conveyor (hinged belt), discharge height 1200 mm • High-pressure coolant system with programmable pressure stages 20 / 5 bar • Preparation for extraction and filter system, connection Ø200 mm, 400V socket • Bar feeder interface preparation DNH 61 • Collet chuck system RÖHM for spindle Ø65 mm • Reducer sleeve for main spindle Ø65 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1999, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck Hodpfx Aaoy R Uvuogsnl • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm Hnodpfxoygm Ake Aagol - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: new, GMN TSE 100cg-12000 / 1.25 high-speed spindle, SN:R367004, unused in opened original packaging, 100% functional, scope of delivery as per photos Hedpoi D U U Njfx Aagonl

Condition: new, GMN TSE 100cg-12000 / 1.25 high-speed spindle, SN:R367002, unused in opened original packaging, 100% functional, scope of delivery as per photos Hnjdpsi D U U Ejfx Aagsl

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle SNr. 281117, unused in original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hsdpfx Aei Eab Soagenl

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle SNr. 287832, unused in original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hsdsi Eacaepfx Aagjnl

Condition: new, GMN TSE 80-16000 / 1.2 high-speed spindle SP: 10-12000 :384568, unused in opened original packaging, 100% functional, scope of delivery as per photos Hedpfx Aaemq H T Hegsnl

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, DG Line 6500 Automatic Perforating/Creasing Machine with Low Pile Feeder. The PIT STOP DG Line 6500 is perfect for companies offering print-on-demand services and requiring high-quality results from digitally printed materials, with fast and straightforward operation. The format is suitable for digital printing and also for book covers (books on demand) with an extension to 50×85 cm, or standard operation at 50×70 cm without the extension. Additionally, the PIT STOP DG Line 6500 can be equipped with a standard perforating kit (optional extra), which is programmable directly via the user display. Sheet Size Min / Max: 8×10 cm / 50×70 cm (extendable to 50×85 cm with optional feeder extension) Sheet Weight: 80 to 400 g.s.m. Programs: 20 programs with up to 20 operations each Minimum Creasing Distance: 0.1 mm A4 Production (1 crease): up to 6,500 sheets per hour Power Supply: 230 V, 50 Hz, single-phase Power Requirement: 2 kW Net Weight: 180 kg Hnsdpfx Ajy Spaqjagjl Dimensions: 150 x 75 x 120 cm

Condition: used, Used plant for production of 99.5% technical glycerin from 80-85% crude glycerin using multi-stage distillation and rectification. Plant was commissioned in 2012. Technology and design are by Desmet Ballestra Oleo. Main Sections of Equipment: - Thermostatized Water - Glyercine Distillation Hnodpfx Asyw Tctoagsl - Distillation Pitch Dilution Process description, equipment list and drawings available.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, Used Stork IMM 12000-19000 injection molding machine. Hnjdswhkfyopfx Aagel

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 2300223434, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: AC, overall weight: 280 kg, Equipment: CE marking, We purchased the machine new at the time and it has been used in our production for occasional sawing operations since 2018. Due to restructuring, the saw is now surplus and is to be sold. The machine is immediately ready for operation and functions perfectly. An on-site inspection under power can be arranged at short notice. We can also organize shipping quickly. BMBS 230 x 280 H-DG – Hydraulic swing frame metal band saw for miter cuts from +60° to -45° • Hydraulic swing frame metal band saw for miter cuts from +60° to -45° • Suitable for cutting, for example, stainless steel, tool steel, hollow profiles, and solid materials • Precise and robust blade guides with adjustable carbide plates • Saw blade tension is monitored electromechanically via microswitch • Equipped with a cooling system at the blade guides • Equipped with a chip removal brush for optimal cleaning and maintenance of the saw blade • When the saw arm is raised, the lowering cylinder automatically locks in the upper position—no additional locking on the cylinder is necessary • Saw arm is inclined at 25°, resulting in longer blade life • After completion of the cutting process, the saw blade stops automatically • Saw arm lowering by its own weight or manually (H-DG) Scope of delivery: • Saw blade • Coolant pump • Operating tools • Vice with quick-release mechanism Technical data Hnodpfx Aaey R Dcdegel Electrical connection: 400 V / 50 Hz Motor power: 1.4 / 2.0 kW Speed settings: 2 Blade speeds: 35 / 70 m/min Blade dimensions: 2720 x 27 x 0.9 mm Dimensions (L x W x H): 1650 x 885 x 1860 mm Table height material infeed: 785 mm Weight: 280 kg Feed length max. per stroke Minimum remnant length CNC operation Minimum remnant length manual operation Cutting capacities Cutting area 0° round profile: 230 mm Cutting area 0° solid round: 150 mm Cutting area 0° square material flat: 280 x 180 mm Cutting area 0° square material upright: 260 x 230 mm Cutting area -45° round profile: 195 mm Cutting area -45° solid round: 110 mm For additional cutting ranges, please refer to the documentation.

Condition: ready for operation (used), Year of construction: 2013, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. Hodpfx Aoyv H Tieagenl • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm • Controller: E 355 (2-Axis Control) • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice Hjdpfx Aecuntzsagjnl - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. Hjdpfxeilg Hdj Aagsnl - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: used, Year of construction: 2007, functionality: fully functional, Horizontal Bandsaw Manufacturer: KALTENBACH Model: KBS 620 DG Year: 2007 Technical Data Manufacturer: Kaltenbach Hedsy H D Raopfx Aagenl Model: KBS 620 DG Year of manufacture: 2007 Working range: 620 x 350 mm Working range (round): 360 mm Saw band dimensions: 6175 x 41 x 1.3 mm Cutting speed: 15-90 m/min Saw band inclination: 3° Feed rate: 0 - 300 mm/min Saw dimensions: L 3.0 x W 1.2 x H 2.10 m Roller conveyor size: L 8.6 x W 1.1 m (incl. stop) Weight: approx. 2.6 t Equipment • Roller conveyor with CNC length measurement system, L = 8600 mm • CNC stop travel 7200 mm • Minimum quantity lubrication • Laser cutting line indicator • Automatic saw blade cleaning • CNC control Kaltenbach AS620 • CNC stop control EPS 80 • Automatic vertical hold-down • Automatic horizontal hold-down All information without guarantee. A demonstration is available at any time in our showroom.