Used Knuth Hydrojet Vario 2040 for sale (958)

Year of construction: 2007, condition: ready for operation (used), A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible. Bsdpfxoxxa T Ss Ac Tjwt

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Bwjdpjzgci Sefx Ac Tet Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2023, condition: used, Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible. Bwedpfx Aozxhlvec Tst

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Drilling / Milling Machine KNUTH MARK SUPER SV Year of construction: 2021 Travel X: 560 mm Travel Y: 190 mm Travel Z: 400 mm Spindle: CM4 Spindle exit: 120 mm Spindle speed: from 75 to 2500 RPM Table size: 800 x 240 mm Tilting head Scale 3 axes Electronic speed variator Bodjzw Ayxspfx Ac Tswt Automatic head up/down Automatic X axe travel Manual Y axe travel Supplied with many accessories: Boring heads, clamps holders, etc (see photos) Voltage: 380 V Length: 1400 mm Depth: 1200 mm Height: 2000 mm Weight: approx 500 KG

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, The models in the ABS-L series are fully automatic horizontal band saws designed for the precise, straight cutting of large and heavy workpieces. Horizontal band saws (without miter adjustment), like these, are specifically designed for precise longitudinal cuts and offer the highest level of stability in daily use. A rigid, double-column frame forms the core of the extremely stable construction. The central control panel allows you to control the blade feed, continuously adjust the blade speed, and clamp the workpiece hydraulically. The robust, automatic material feed system operates entirely without electronics or programming, yet still provides high repeatability and dimensional accuracy. Double-column construction for outstanding stability Workpiece feed via feed rollers integrated into the vise Hydraulic workpiece clamping Optical detection of workpiece height Infeed roller conveyor, 1.2 m Working area Working height: 585 mm Cutting performance Cutting capacity 0° (rectangular): 600 mm x 560 mm Cutting capacity 0° (round): 560 mm Cutting capacity 0° (square): 560 mm x 560 mm Cutting speed, continuously variable: 15 m/min - 120 m/min Fence length: 500 mm Positioning accuracy, material feed: 0.5 mm Drive power Main drive motor power: 4 kW Hydraulic pump motor power: 1.1 kW Feed motor power: 0.55 kW Dimensions and weights Dimensions (L x W x H): 3.25 m x 1.4 m x 2.1 m Weight: 2100 kg Bwjdpfx Acozdlu Eo Tot Blade dimensions: 6000 mm x 41 mm x 1.3 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 146978, Knuth Surface Grinding Machine Flat HFS 2500C Bjdpfoy H Dg Ijx Ac Towt Working Area & Capacities Table dimensions: 250 x 500 mm Grinding area (max.): approx. 500 x 250 mm Maximum workpiece weight: 180 kg Distance spindle center to table surface: 450 mm Travel Distances & Feeds Longitudinal travel (X-axis): 560 mm Cross travel (Y-axis): 275 mm Hydraulic table feed (X): 7 – 23 m/min Rapid traverse cross (Y): 990 mm/min Rapid traverse vertical (Z): 460 mm/min Spindle & Grinding Wheel Grinding spindle motor power: 2.2 kW Grinding wheel dimensions: 200 x 20 x 31.75 mm Graduation: Y-axis 0.02 mm / Z-axis 0.005 mm Dimensions & Weight Machine dimensions (LxWxH): approx. 2650 x 2150 x 1675 mm Total weight: approx. 1800 kg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,800 mm, total length: 1,500 mm, total width: 1,700 mm, overall weight: 1,550 kg, The machine comes from a training workshop and has hardly ever been used. Condition: Like new. Bjdpszq Hzyjfx Ac Tswt

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 6,000 rpm, total height: 1,700 mm, overall weight: 5,000 kg, number of axes: 2, This 2-Axis lathe was manufactured in 2015. Featuring a Fanuc 0i-Mate TD control, it offers a speed range of 50-6000 min-1 and rapid traverse speeds up to 30000 mm/min. Equipped with a hydraulic 3-B chuck and hydraulic tailstock MK5, it ensures efficient operations. Weighing 5000 kg and with dimensions of 3300 x 1700 x 1700 mm, it’s robust yet space-efficient. Consider the Knuth Starship 400 for precise turning operations. Contact us for further information. Bedpozvu N Aefx Ac Towt Machine Benefits Technical Machine Benefits • Spindle holder iso a2-6 • Centre distance 550mm • Hydraulic tailstock mk5 • Hydraulic 3-b chuck • Rapid traverse speeds up to 30000 mm/min • Max. Turning diameter over bed 360mm Extra Information If required, a minimum quantity lubrication system can be included. The machine can be retrofitted with a C-axis and driven tools. Dimensions Machine Depth 1700 mm

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis KNUTH XMILL 640 was manufactured in 2015. It features a Siemens 828 control, a spindle speed of 8,000 rpm, and a BT40 spindle taper. The table size is 750 × 360 mm, and it includes an 18-tool changer. If you are looking to get high-quality milling capabilities, consider the KNUTH XMILL 640 machine we have for sale. Contact us for more information. • Rotary axes: No • Tool changer: 18 tools • Table size: 750 × 360 mm • Optical scales: No Bjdpfx Acszvu U Es Tewt • Other options: 20 bar through-spindle coolant Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2008, serial number 108392 Electric capacity 7,7 Watt Bwedpfjztfv Ijx Ac Tjt working width 2050 mm 4 mm weight of the machine ca. 4 t

Condition: like new (used), operating hours: 10 h, functionality: fully functional, Horizontal surface grinding machine KNUTH Type HFS 2550 n VC Bwsdjzquawopfx Ac Tjt Table: 500 x 250 mm Grinding length: 560 mm Grinding width: 275 mm Distance between table and spindle axis: 450 mm Automatic feed Magnetic table Coolant system

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm tool taper SK40 spindle turning speed range 110 - 1230 U/min table-size 270 x 700 mm total power requirement 3,7 kW weight of the machine ca. 900 kg dimensions of the machine ca. 1400 x 1400 x 1700 mm Features: Bjdpfezx Hfbjx Ac Towt - 3-axis digital display - Milling head swivels ± 45 degrees - Coolant system - User manual

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest Bjdpfx Aey Duy Hsc Tewt - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: good (used), operating hours: 200 h, functionality: fully functional, machine/vehicle number: H05107, Bench drill press Knuth SSB 50nSuper MK 4 WORK AREA Drilling capacity 50 mm Threading capacity, steel M 30 Table clamping surface 580 mm x 460 mm Quill stroke 200 mm Manual table travel 515 mm Motorized table travel 405 mm Table swivel range (max.) ± 50° Column diameter 180 mm Bsdpfszqt U Hox Ac Tswt Distance from spindle nose to table surface 575 mm Distance from spindle nose to base 1165 mm Overhang 360 mm MAIN SPINDLE Speed range 50 rpm - 2000 rpm Spindle taper 4 MK FEED Quill feeds 0.08; 0.12; 0.17; 0.24; 0.35; 0.50 mm/rev

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, Technical Data – Solidturn 200/1500 B – Universal Lathe Working Area Distance between centers 1500 mm Max. turning diameter over bed 400 mm Max. turning diameter over carriage 225 mm Max. turning diameter over gap 530 mm X-axis travel 330 mm Z1-axis travel 130 mm Gap length 320 mm Bed width 330 mm Cross slide swivel range 360° Main Spindle Speed range (15) 22 – 2000 rpm Spindle bore 85 mm Spindle mount Camlock D1-6 Spindle taper MT 5 Feed Feed X-axis 0.036 – 2.019 mm/rev Feed Z-axis 0.072 – 4.036 mm/rev Thread Cutting Metric thread cutting 0.5 – 28 mm Diametral thread cutting 8 – 56 mm Module thread cutting 0.5 – 3.5 mm Whitworth thread cutting 1 – 56 TPI Tailstock Tailstock quill diameter 65 mm Tailstock taper Bodpfxswuvacj Ac Tswt MT 5 Tailstock quill stroke 120 mm Tailstock lateral adjustment ± 5 Drive Power Main spindle motor power 7.5 kW Supply voltage 400 V Dimensions and Weights Dimensions 2920 x 1150 x 1800 mm Weight 2240 kg

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828D, total height: 2,300 mm, total width: 1,800 mm, table width: 750 mm, table length: 360 mm, table load: 300 kg, overall weight: 4,200 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, product length (max.): 2,300 mm, number of axes: 3, This 3-axis KNUTH X-Mill 640 was manufactured in 2015. It features a travel of 640 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a Siemens 828D control unit and a 16-fold double-arm tool changer. If you are looking to get high-quality machining capabilities, consider the KNUTH X-Mill 640 vertical machining centre we have for sale. Contact us for further details. - Table Height from Floor: 850 mm- T-Slots (Number / Width / Distance): 3 / 18 mm / 100 mm- Spindle Speed: 60 - 8000 rpm- Distance Spindle to Vertical Guide Way: 430 mm- Main Motor Power: 7.5 / 11 kW- Total Power: 10.00 kW- Feed Rate: 5 - 5000 mm/min- Rapid Feed Rate: 15000 mm/min- Positioning Accuracy: 0.01 mm- Repeatability: 0.005 mm- Machine Weight: 2500 kg (Manual lifting specification) / 4200 kg- Operating Voltage: 400 V / 440 V, 3-Phase, 50/60 Hz- Operating Temperature: 0°C ~ 45°C- Pneumatic Operating Pressure: >= 0.6 MPa (6 kg/cm²)- Operating Setup Time: 186,488- Tool Changer: 16-fold double-arm tool changer- Standard & Included Accessories: Siemens 828D control, electronic handwheel, spiral chip conveyor, servo drives for all 3 axes, 16-position tool changer, pneumatic tool clamping, air conditioning, fully enclosed work area, work light, Ethernet, USB interface, sloping chip tray, automatic central lubrication, spindle oil cooling, operating tools, operating instructions, X.div CNC rotary table 170 mm with manual tailstock for Siemens control, 6" manual chuck for X.div, BT40/B16 and BT40/B18 drill chuck mounts, MAS BT40-ER40-80 collet chuck, 15-piece ER40 collet set (3-26 mm), BT40 combination mandrels (Ø22, Ø27, Ø32 mm), WELDON BT40 milling chucks (Ø6, Ø8, Ø10, Ø12, Ø16, Ø20 mm) Technical Specification Bwsdszrnvuspfx Ac Tst Taper Size BT 40

Condition: used, Year of construction: 2017, grinding length 1500 mm centre height 180 mm Bsdpfowm Rqgsx Ac Tjwt weight of the machine ca. 3,9 t dimensions of the machine ca. L: 4900 x 1650x 1800 m

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 750 h, power: 9 kW (12.24 HP), input voltage: 430 V, number of axes: 4, number of slots in tool magazine: 10, controller manufacturer: Yaskawa, total height: 800 mm, table length: 4,000 mm, table width: 2,000 mm, Machine purchased from the manufacturer Plot Electronic in 2016. Bedpfszxqtpox Ac Tjwt Used for milling models and molds in materials: MDF, polyurethane. In 2022 it was upgraded with the addition of a 4th axis and an oscillating head. Full technical specification of the machine: - Stable welded construction with an annealed gantry made in hybrid monolith technology - Mechanics – linear guides, ball carriages - Helical rack and pinion system - Spindle with tool changer, 9kW, ISO 30, ER 32 - Linear tool magazine holds 10 tools - Drives – AS servo drives - CNCGraf control module in Polish - Simulation possible before machining, real-time cutting visualization - Material height sensor - Tool length sensor - Spindle cooling system – compressed air - Control cabinet with computer and keyboard - Vacuum table - T3000K oscillating head - 4th rotary axis on a tailstock, mountable on the table - Spindle speed control system

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 163190, grinding length: 600 mm, grinding width: 300 mm, workpiece weight (max.): 270 kg, grinding wheel diameter: 350 mm, distance table to spindle center: 565 mm, Like-new horizontal surface grinding machine with few operating hours! TECHNICAL DETAILS Grinding area Grinding length: 600 mm Grinding width: 300 mm Work table and workpiece load Table dimensions: 300 mm × 630 mm Maximum workpiece weight: 270 kg Distance spindle axis – table surface: 565 mm Travel distances and feeds Travel distance X-axis: 765 mm Travel distance Y-axis: 340 mm Scale ring graduation Y-axis: 0.02 mm Scale ring graduation Z-axis: 0.005 mm Automatic transverse feed Z-axis: 0.1–8 mm Feeds and rapid traverses Hydraulic feed X-axis: 7–23 m/min Rapid traverse Y-axis: 990 mm/min Rapid traverse Z-axis: 460 mm/min Grinding wheel Grinding wheel dimensions: 350 mm × 40 mm × 127 mm MACHINE DETAILS Control type: Conventional 2-axis position indicator: KNUTH Xpos 3.1 Motor power grinding spindle: 5.5 kW Total power requirement: 7 kW Dimensions & Weight Machine dimensions: 2,800 mm × 2,200 mm × 1,890 mm Machine weight: approx. 2.7 t EQUIPMENT 2-axis position indicator KNUTH Xpos 3.1 Grinding wheel Bwodpszqcvgofx Ac Tjt Grinding wheel flange Balancing arbour Balancing stand Halogen work light Magnetic chuck 600 mm × 300 mm Adjustment screws Operating tool Automatic transverse and longitudinal feed Hydraulic table longitudinal movement Double V-guides for the longitudinal movement Combined V- and flat guides for the transverse movement Hardened and ground table guide rails with PTFE counter coating Grinding spindle with maintenance-free, preloaded precision angular ball bearings External hydraulic unit Automatic central lubrication

Condition: ready for operation (used), Year of construction: 2011, overall weight: 15,200 kg, This 3-axis KNUTH XMill 1000 TB was manufactured in 2011. It features a total power of 23.8 kW and operates on 400 volts with a frequency of 50Hz/3. Ideal for detailed vertical machining tasks. Contact us for more information. • Total power: 23.8 kW • Voltage: 400 V • Frequency: 50 Hz • Phases: 3 Bwjdpfxezvvnao Ac Tot

Year of construction: 2021, condition: ready for operation (used), overall weight: 9,300 kg, total width: 2,200 mm, total height: 2,130 mm, cutting length (max.): 3,080 mm, product length (max.): 3,920 mm, Hydraulic shearing machine manufactured in 2021. This KNUTH KHT H 3010 NC features a working length of 3080 mm and a throat depth of 150 mm. It includes a Cybelec Touch 8 control for optimal positioning of cutting gap, angle, and length. The robust backgauge and standard blades are suitable for stainless steel. If you are looking to get high-quality shearing capabilities, consider the KNUTH KHT H 3010 NC machine we have for sale. Contact us for further details. • Control: Cybelec Touch 8 (touchscreen) • Features: • Guided cutter bar with adjustable cutting angle for minimal twisting Bjdpfxjzgfhwe Ac Tswt • Automatic optimization of cutting gap, cutting angle, and cutting length • Controlled backgauge with preloaded ball screw • Controlled kerf (cutting gap) adjustment • Controlled cutting angle adjustment • Blades/knife suitable for stainless steel • Robust, precise backgauge • Working area: • Working length: 3080 mm (maximum cutting length 3080 mm) • Throat depth: 150 mm • Cutting angle: 0.3°–2° • Strokes per minute: 17 H/min • Hold-down: 16 positions, 20 t capacity • Table size: 3340 mm x 520 mm x 875 mm • Backgauge: • Rear stop: 1000 mm • X-axis feed speed: 6000 mm/min • Front support arms: • Quantity: 3 • Length: 900 mm each • Cutting capacities: • 10 mm at 450 N/mm² • 6 mm at 700 N/mm² • Drive: • Main motor: 22 kW • Hydraulic tank: 350 l

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 1,600 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 127 mm, number of axes: 3, This 3-axis KNUTH Turnado 280/1500 was manufactured in 2018. It features a distance between centers of 1,420 mm and a swing over bed of 560 mm. The machine is equipped with a spindle speed range of 25 – 1,600 rpm and includes a 3-axis Digital Readout (DRO) and a quick change tool post. If you are looking to get high-quality turning capabilities, consider the KNUTH Turnado 280/1500 horizontal turning machine we have for sale. Contact us for further details. Technical specifications • Distance between centers: 1,420 mm • Swing over bed: 560 mm • Swing over cross slide: 360 mm • Swing in gap: 790 mm • Gap length: 180 mm • Bed width: 350 mmTravels • Compound slide swivel: ±52°Spindle • Spindle nose: Camlock D1-8 • Spindle bore: 80 mm • Spindle taper: MT7 • Number of spindle speeds: 12Feed rates • Longitudinal feed: 0.059–1.646 mm/rev • Cross feed: 0.020–0.573 mm/revThread cutting • Metric threads: 0.2–14 mm (47 ranges) • Module threads: 0.1–7 mm (39 ranges) • Whitworth threads: 2–112 TPI (60 ranges) • Diametral pitch threads: 4–112 DP (50 ranges)Tailstock • Tailstock taper: MT5 • Tailstock quill diameter: 76 mm • Tailstock quill stroke: 180 mm • Tailstock offset adjustment: ±12 mmMachine data • Main motor power: 7.8 kW • Voltage: 400 V • Frequency: 50/60 Hz Additional equipment • 3-axis Digital Readout (DRO) • Quick Change Tool Post • Chip conveyor • Extensive standard tooling package Technical Specification Counter Spindle Yes Driven Tools No Bwsdpfxszgfqfj Ac Tst

Condition: used, Year of construction: 2021, machine/vehicle number: 168600, Reference No. 26029 Technical Data: - Max. cutting width: 2080 mm - Max. cutting capacity at 45 Kp/mm²: 6 mm - Throat depth: 150 mm - Automatic cutting angle adjustment: 0.3 – 2° - Automatic cutting gap adjustment - Number of hold-downs: 10 pcs - Strokes per minute: up to 22 1/min - Front angle gauge approx.: - 2 front support arms approx.: - Motorized backgauge with positioning control up to 1000 mm - Rear area safety device with light barrier - Cutting line illumination - Working height: 860 mm Bjdpfxoywhuwj Ac Tswt - Electric foot switch - Drive: 400 V / 11 kW - Space requirement approx.: W 3150 x H 2150 x D 2300 mm - Weight approx.: 4.8 t

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW Bwedpoyclvnefx Ac Tot dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 950 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,120 mm, total width: 1,770 mm, overall weight: 3,660 kg, spindle speed (max.): 1,800 rpm, product length (max.): 2,290 mm, number of axes: 3, This 3-axis KNUTH KB 1400 was manufactured in 2018. It features a travel of 950 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed range of 30 to 1800 rpm and a table setup area of 1400 mm x 400 mm. If you are looking to get high-quality milling capabilities, consider the KNUTH KB 1400 vertical machining centre we have for sale. Contact us for further details. • Feed • Feed speed X-axis: 18–627 mm/min • Feed speed Y-axis: 18–627 mm/min • Feed speed Z-axis: 18–627 mm/min • Rapid feed Bwsdpfxszgfiuo Ac Tot • Rapid feed X-axis: 1670 mm/min • Rapid feed Y-axis: 1670 mm/min • Rapid feed Z-axis: 1670 mm/min • Vertical milling head • Throat: 510 mm • Spindle speed (vertical): 30–1800 1/min (rpm) • Quill stroke: 105 mm • Head swivel range: ±30° • Working area • Spindle axis-to-table surface distance: 150–650 mm • Table set-up area: 1400 × 400 mm • Number of T-slots: 3 • T-slot width: 18 mm • T-slot spacing: 100 mm • Speed height-adjustment (max.): 1670 mm/min • Coolant pump flow rate: 12 l/min Technical Specification Taper Size SK 50