Used Klaeger Vbs 400S for sale (15,007)

Condition: excellent (used), Year of construction: 2018, cutting height (max.): 400 mm, cutting width (max.): 400 mm, For sale here is a KLAEGER VBS 400S vertical band saw with an IDEAL BSS 016 welding unit. The machine has seen little use and is in good condition! It can be viewed and tested at our facility at any time while it is powered on. Manufacturer: KLAEGER Model: VBS 400S Year of manufacture: 2018 IDEAL welding unit type: BSS 016 (For welding saw bands) Saw band length: approx. 3600 mm Saw band width: approx. 4–20 mm Cutting width: approx. 400 mm Cutting height: approx. 400 mm Cutting speed: approx. 15–1000 m/min Table size: approx. 760 x 600 mm Drive power: approx. 4 kW Machine dimensions: approx. 2225 x 1120 x 770 mm Weight approx.: 500 kg Shipping costs within Germany: €180 Shipping available throughout Europe!! Viewing/pickup is possible by appointment in 42855 Remscheid. You will receive an invoice with VAT shown. Bledpfxsyupw Hs Akaog Sale from location 42855 Remscheid, ex works. Technical specifications subject to change.

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: Bedpfx Akey H Dmhjaslg - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: good (used), Cutting range round/square: 190/190 x 190 mm Cutting range at 45° mitre round/rectangular: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 stroke speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Bedpfxoyvfp Is Akaslg Required space: 1200 x 600 x 980 mm

Condition: used, Year of construction: 2003, 265 mm 3280 mm 0,9 mm dimensions of saw-band 3280 x 27 x 0,9 mm 200 mm cutting Ø by 30° 130 mm mitre joint cuts -/+ degrees 90- 30 flat material 300x150/130x100 15- 100 m/min Bedpfxsxuv E Ao Akajlg 2,0 kW 1,61 x 0,96 x 1,4 m weight 0,5 t Used automatic band saw with sided miter - rapid travers - roller conveyor - 20 new saw blades

Condition: like new (used), Year of construction: 2024, _____ Bljdpfjx Ez Elex Akaog Description: Year of manuf. : 2024 Working area Cutting area round :300 mm Cutting area square :300 x 300 mm Remaining piece length automatic operation :80 mm Technical data Three-phase motor :2.2 kW Cutting speed :20 - 100 m/min, infinitely variable Feed length :600 mm Working height :850 mm Saw blade :mechanical Measurements Length :1,716 mm Width :3,055 mm Height :1,995 mm Weight :1,060 kg :

Condition: used, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, The machine is hardly used and fully functional. Bedpfx Aeyfnd Hjkaelg

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Bsdpfx Aoy H I Ngskaelg Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, all stainless steel mobile with outfeed conveyor belt width 400 mm Bodsy Ichmjpfx Akajlg dimensions: (L x W x H): ± 2.390 x 800 x 2.285 mm power 13 kW weight 850 kg

Condition: used, all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 8 mm suitable for thermal oil heating (= 120 kW) with top hold down belt oil circulation pump level control adjustable speed infeed conveyor Bledpfxey H Dc Ns Akaeg outfeed conveyor sediment removal system lifting unit with electrical hoists suitable for fire protection overall length : ± 5.400 mm overall width : ± 1.500 mm New electric control box with new electrical components

Condition: used, Year of construction: 2016, Colour: Grey Price: On request Blodpfx Akjx R A Ufsaog - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 1600 - Max. cutting width [mm]: 4300 - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1994, total length: 4,700 mm, total width: 1,200 mm, total height: 1,600 mm, Colour: Grey Weight: 672 kg - Year: 1994 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 228822 - Main motor power [kW]: 4.5 - Max. cutting length [mm]: 4040 - Max. cutting height [mm]: 150 - Max. saw blade diameter [mm]: 400 - Arbor saw blade diameter [mm]: 32 - Voltage [V]: 380 - Power [kW]: 11.2 - Transport dimensions: 4700mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 672kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bsdpjxbf E Sofx Akaslg Yorick Diebels

Condition: used, Year of construction: 2013, total height: 2,220 mm, total length: 6,100 mm, total width: 2,350 mm, Colour: Grey Weight: 6.000 kg Horizontal band saw machine High point HP-400 Year of construction 2013 Serial number 213-051 Saw wheel diameter 860 mm Maximum cutting width 400 mm Motor 22kW (30hp) (Per piece!) Bodpfx Aswnhn Ejkaslg Conveyor belt in poor condition. - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 213-051 - Transport dimensions: 6100mm x 2350mm x 2220mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, all stainless steel nett belt length 2.000 mm nett belt width 400 mm electrically heated: 47 kW oil circulation pump level control with top hold down belt filter lifting unit with manual hoists adjustable speed infeed conveyor outfeed conveyor suitable for fire protection Bodpey Ednvjfx Akajlg overall length : ± 4.200 mm overall width : ± 1.200 mm

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm -Weight: 288 kg Bedsy H Itropfx Akaslg

Condition: used, infeed belt “Stork” all stainless steel mesh wire belt belt width 400 mm mobile dimensions: (L x W x H) : ± 1.400 x 700 x 900 mm + “Marel Townsend” GoldFryer Type TBM 400/4000 TH all stainless steel suitable for thermic oil heated with lower and upper belt frying length 4.000 mm belt width 400 mm adjustable speed oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 7.100 x 1.500 x 2.900 mm oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 7.100 x 1.500 x 2.900 mm Bljdoy A Hu Tepfx Akaeg

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. Blodpjy Aunusfx Akasg mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. • Swing over bed: 410 mm • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) Bljdpsy If A Hefx Akajg Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm Bodpsy Ifptofx Akaolg • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Bedpfsw S I Dgsx Akaslg Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment Bodpfex Nr Rysx Akaelg • Robot equipped: Yes • Robot interface: Euromap 67

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes Bsdpsy Dpmujfx Akaolg CE

Condition: used, Pallet offer consisting of 70 pieces of used plastic stacking bins with the standard dimensions of 600x400 mm according to Euronorm, making it suitable for standardized logistics applications, such as pallets and racking. Bodpfx Aex Ahrqskaelg With a capacity of 30 liters, the bin provides sufficient space for the storage and transport of goods. Made of

Condition: used, Batch offer consisting of 28 Euronorm stacking bins 600 x 400 mm. A versatile and durable solution for storing, sorting, and transporting goods in professional environments. Thanks to the standard Euronorm dimensions, this stacking container fits seamlessly into existing logistics systems, roll containers, racks, and pallets, Bodpfx Akoyccx Tjaslg

Condition: used, Pallet offer consisting of 70 used plastic stacking bins with Euronorm dimensions 600x400 mm. A robust and efficient storage solution, often used in logistics, warehouses and transport. Bjdpfx Aksx Ahvieaslg Made of polypropylene (PP), a strong, durable and chemically resistant plastic, ideal for intensive use. Dimensions: 600x400 mm, a standardized

Condition: used, Batch offer consisting of 208 used plastic Euronorm stacking bins measuring 400 x 300 mm and with a capacity of 6 liters. Specially designed for hygienic and efficient storage within the food industry. The storage container is made of food-grade polypropylene (PP), a strong and durable material that meets the highest hygiene Blodpfx Akjx Ahp Aeasg