Used Kbb Mb 30 for sale (26,200)

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven Lhjdpfxed S Uf Sj Ahbeg with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: used, Thrust: 400 TON. Barbed points: no. 2 Model: AF 400 MB 30-60 Year of construction: 1992 Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Front passage: 3,000 mm. Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Lodsq N Er Depfx Ahbshg Weight: 82 ton.

Condition: used, Thrust: 600 TON. Barbed points: no. 2 Model: AF 600 MB 30-60 Year of construction: 1994 Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Front passage: 3,000 mm. Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Lhjdpfeq N Ettex Ahbog Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Weight: 110 ton.

Year of construction: 2011, condition: used, 1 used flexible shaft with travel column Manufacturer: Biax Type: A MB 30 year of construction: 2011 Technical data: Speed infinitely variable : 2.000 - 15.000 min Power : 370 Watt Voltage : 380 Volt, 50 Hz Weight : 22,3 kg Ljdjhaqtlspfx Ahbehg

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm Lhedpexabl Sefx Ahbog motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: Lhsdpfx Ahexrb Rfebsg - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: good (used), functionality: fully functional, Year of construction: 1980, operating hours: 6,000 h, power: 92 kW (125.09 HP), motor manufacturer: Mercedes, gearing type: mechanical, fuel type: diesel, maximum speed: 40 km/h, first registration: 11/1980, next inspection (TÜV): 11/2026, color: light green, machine/vehicle number: 44316100011477, Equipment: additional headlights, cabin, hydraulics, For sale: MB Track in top condition. Brakes, MOT, and oils all newly serviced. Drives perfectly. Gross price: €62,135. VAT is not deductible. Lhodpfxsv U Nxtj Ahbeg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,356 h, punching force: 31 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,254 mm, travel distance Y-axis: 1,263 mm, CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details. Lsdpfx Ahjy Sar Dobjhg - Total Hits: 24,439,006- Total Working Time: 11,309 hours- Actual Punching Time: 4,708 hours- Control System: CNC with dedicated console and Logitech keyboard interface- Multitool Setup: Station 2, Code 1 (6MT01)- Oil Temperature: 22 °C- Power Supply: 50 Hz- Bed Type: Brush table to prevent sheet scratching

Condition: new, Gamba & Fiorito Gamfior MKA 30-L spindle , hole spacing of the mounting holes: 82x82 mm, Ø drive shaft: 18/10 mm outside, 5 mm inside, unused, mint condition, 100% functional Lodoi D H T Ispfx Ahbohg

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 320 mm, conveyor belt width: 430 mm, type of input current: three-phase, total width: 520 mm, total length: 800 mm, total height: 1,380 mm, Wrapping Machine Erka Model: WMB 30 Ledswc Iqpjpfx Ahbjhg For all types of sticks such as Kornspitz, pretzels, and lye sticks, etc. TOP combination – wrapping machine for strands/pretzel strands Simple, robust croissant wrapping machine in stainless steel design Long roller 300 mm, foldable Exclusive DGUV V3 tested by us Connection 400V, 16A-CEE plug Refurbished used machine with warranty and spare parts service Optional: Maintenance contract Service package Delivery service Instruction & commissioning Leasing & rental service We also have other top croissant wrappers in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, DGUV certified until: 06/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 500 mm, total length: 483 mm, total height: 1,400 mm, Erka WMB 30 Rolling Machine for all stick types such as Kornspitz, pretzels, and lye sticks, etc. Combo rolling machine for strands/pretzel strands Stainless steel design Machine is mobile Connection: 400V, 16A CEE plug Used machine with warranty + spare parts service Option: Ljdpfx Ahexxgm Ejbshg Maintenance contract Service package Training & commissioning Delivery service Leasing & rental service We have many more rolling machines in stock!

Condition: used, maximum load weight: 24,200 kg, overall weight: 30,000 kg, axle configuration: > 3 axles, first registration: 11/2011, Equipment: ABS, Manufacturer HFR Model 30 t. 4 axles Timber transport / Wood transport Year 2011 Lhodpjw N Uuyofx Ahbog Condition Good Serial Number UH9PX301125HF1141 Ref. nr. 7949 Reg. date: 25-11-2011 Last seen: 10-12-2024 Disc brake: ? ABS: ? Rear axles: BPW Suspension: Air Tire Size: 265 / 70R19,5 Cover% left 100 - 100 - 80 - 100% Total weight: 30000 kg. Net weight: 5800 kg. Load capacity 24200 kg. Inside length: 7400 mm.

Condition: used, functionality: unexamined, Year of construction: 1987, operating hours: 16,000 h, power: 110.32 kW (149.99 HP), motor manufacturer: Daimler-Benz, gearing type: other, fuel type: diesel, maximum speed: 40 km/h, first registration: 06/1987, next inspection (TÜV): 04/2026, color: yellow, overall weight: 10,000 kg, front tire size: 18,4R30-155A8, rear tire size: 18,4R30-155A8, total height: 2,970 mm, total length: 4,720 mm, total width: 2,480 mm, working width: 2,800 mm, machine/vehicle number: WDB4431610W135805, Equipment: additional headlights, cabin, front power take-off, hydraulics, lighting, power shift gear, trailer coupling, Well-maintained, older tractor with front hydraulics, dual-circuit air brake system, and 3 hydraulic control units. Tires are as new. Transmission was replaced at approximately 8,000 operating hours. The engine was replaced after around 9,000 operating hours (150 hp). Clutch (PTO and drive clutch) is as new. Equipped with a swiveling seat. Lhedpfx Ajy Hmkishbog

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators Ledpfx Asb E I Utehbohg (high reliability, simple operation and high efficiency) in a series resonant circuit and a compact design, with cooling enclosed in the generator enclosure. Rittal generator cabinet and GH induction TC150 / 2 resonant circuit Voltage 400V Frequency 50 Hz Current 56 A Power 37.5 KVA as good as new condition! Scope of delivery: Transistor generator, Rittal generator cabinet with cooling and TC150 / 2 resonant circuit (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), With C-axis With driven tools FANUC TXP-200 FA control Lhsdpfx Aeq Dlt Sjhbog Turning diameter max 360 mm Turning length -683 mm Swing Diameter -450 mm Spindle speeds -3'000 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2006, condition: ready for operation (used), CME horizontal milling machine Type MB 3000 FLEX Rotary table size 1.400 x1.400 mm Max. table load 12T Longitudinal travel (X) 3.000 mm Vertical travel (Y) 2.000 mm Cross travel (Z) 1.000 mm Lhsdogui Txepfx Ahbsg Drill travel (W) 700 mm Rotary table (B) 360 - 0,001 degree Boring spindle dia. 150 mm Spindle speed 50-2200 rpm Spindle taper 50 ISO Spindle motor power 30 kw Ram size 580-430 mm CNC Controller Heidenhain iTNC530 Accessories: Cooling through spindle 60 bar ATC 60 pots Hours: Spindle 27.048 hours Machine dimensions: Height 4.856 mm Length 6.663 mm Width 10.000 mm Weight 70 T Build year 2006

Year of construction: 2004, condition: reconditioned (used), RUBBER BELT SHOT BLASTING MACHINE WITH FILTER Designation: Rubber Belt Shot Blaster Brand : Wheelabrator Type: MB 300G Belt Type: Rubber Belt Charge max. kg: 800kg Shot Wheel: 1 Pieces with 18,5kw Belt width: 1.200mm Fill weigth: 300 liters Consisting of: - Rubber Belt Shot Blaster Typ: MB 300G - Main Panel - Filter - Outlet Vibro - Hydraulik Loader Preis: Verladen auf LKW Price: Loading on Truck Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Lieferung / Montage / Inbetriebnahme / Schulung OPTIONAL: delivery / assembly / commissioning / training Lhodpfxohxyzke Ahbeg Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlagen an! We can offert for spare Parts for Rösler, Shot Blasting Machines!

Condition: ready for operation (used), Cutting range round 90°/30°: 320mm/250mm, cutting range square 90°/30°: 320mm/240mm, max. profile capacity: 500mm/320mm, max. workpiece height: 320mm, throat depth: 520mm, saw band dimensions X/Y/Z: 4600mm/32mm/1.1mm, band speed: 96m/min. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/1400mm, weight: approx. 800kg. An on-site inspection is possible. Ledpfx Ahew U Uamobshg

Condition: new, axle configuration: > 3 axles, Year of construction: 2026, Further information here: Lsdpfxsv D Abms Ahbshg

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Lodex Av Uaopfx Ahbjhg

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Lhjdpfx Ahsm Uc R Ujbeg Engine: 160 kW

Year of construction: 1995, condition: excellent (used), 2 units centrifugal pumps Sulzer MB 80-230/3 Flow rate: 79-89 m³/h Head: 240-230 m Max. temperature: 130°C Seal: Mechanical seal with flush water connection Drive power: Siemens 90 kW Lhsdpfsd Sybujx Ahbsg Speed: 2980 rpm ! Price per unit !

Condition: used, New: No Please contact us for more information. Lsdpfsy T Rqyjx Ahbjhg

Condition: new, Year of construction: 2024, Tube and flatbed laser 4 kW | Combi HD-F 3015 BH Laser combination machines Machine dimensions: - (L x W x H) 9,350 mm x 3800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. sheet weight: 200 kg/m² -Laser power (IPG): 4 kW -travel Z - axis: 125 mm -Max. Synchronous speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Cutting area: - steel: 20 mm Lhedpfx Ahjfl T T Nsbsg - stainless steel: 10 mm - Aluminium (AlMg3): 12 mm - brass: 10 mm - copper: 6 mm Equipment: IPG 4000W Fiber Laser Source (including cooler) Compact dust extractor (filter) for 4 kw Air conditioning in switch cabinet Flatbed laser with automatic shuttle table Laser cut monitoring Automatic laser head positioning CE - shuttle table with light barrier protection Control SIEMENS SINUMERIK 840D Auto focusing Precitec Procutter F150 focus cutting head Flatbed laser with shuttle table (automatic pallet changing system) Pipe cutting device lateral max. Ø400 mm Sheet metal testing (Autom. sheet metal position and size measuring system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface parameters page (performance-speed-pressure) Software Lantek or Metalix Cad/Cam Software with Autonesting Lighting for the work area Multi-chamber suction system warning light Special Laser Cutting Options Positioning laser diode Pierceline (E

Condition: good (used), Year of construction: 2015, Metos Viking Combi 300EM Mixing Kettle 2015, Stainless, 300L cooking kettle, electrically heated, 41.5Kw, variable speed and temperature controls, guarded lid, tilt to discharge, 3Ph Lhedeyzingopfx Ahbjg