Used Kögel 3-Achs-Sattelanhänher Multi Chassis for sale (82,112)

Condition: new, maximum load weight: 36,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction with continuous crossmembers * Frame extended forward * Coupling plate approx. 8 mm thick, with a 2-inch fifth-wheel kingpin according to DIN 74080 / ISO 337 Axle * Axle lift mechanism on axle 1, with fully automatic, load-dependent axle lift control * Starting assist: Activated via 3x brake application, 30% overload up to a speed of 25 km/h * Operation on the chassis via switches * Also possible from the cab (switch in the cab required - PIN 12) * Manufacturer to be chosen: Kögel * Three-axle unit, with disc brakes Ø approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm travel Vehicle tires * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J) Chassis components * Fifth-wheel mounting (manufacturer to be chosen by Kögel) mechanically with leveling foot, 24 t lifting capacity. * One-sided operation on the driving side (right side). * Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5 * Consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles and 1 pair of quarter-circle fenders with mud flaps behind the axles. * Lateral protection device according to ECE-R73. * 2 plastic toolboxes, waterproof, dimensions (internal) approx. 525 x 390 x 410 mm. Installation at the rear, 1x on the left and 1x on the right. * High, rigid rear underrun protection made of steel according to ECE-R58 * 1 pair of retractable warning signs (approx. 280x280mm) for over-width loads, retroreflectively red / white, with LED lighting, spiral cable and plug connection. Brake / Air Suspension System * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638, (without connection lines) * Parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection. * WABCO EBS system * Air suspension system incl. 1 lifting and lowering valve, mounted on the driving side behind the axle unit * Driving position is automatically adjusted. * 2 non-interchangeable coupling heads at the front * Air tank for braking system and air reservoir made of steel (EN 286-2) Floor * Plate floor approx. 30 mm thick * Floor sealed around the perimeter, pocket rails for square tube inserts approx. 80 x 80, arrangement according to drawing Gkjdpfx Aijz N Nxdsvoc * 8 pieces of pocket rail strips (18 pocket rails per strip: 4 pieces each on the outside + 10 pieces in the middle) Front Wall * Storage for max. 20 square tube inserts 80 x 80 (length 1,990 mm) on the inside of the front wall * Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front end according to EN 12640. * Side wall VarioFix steel hole outer frame without rail storage * 21 pairs of lashing eyes in the outer frame (according to EN 12640), permissible pulling force approx. 5,000 kg per ring. Impact Protection * 1 pair of steel impact buffers approx. 160x85x85mm mounted on the frame end plate

Condition: new, maximum load weight: 37,820 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Below is an excerpt of the equipment. Complete equipment list available upon request. Chassis 10110.030 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337. K11110.893 With crossmember and container locking devices for accommodating: a) 1 x 20' container, flush at the rear. b) C715 Vehicle equipped with Quick-Lock locking devices! Suspension I 17160.013 Axle lift mechanism on axle 1. I 17165.113 Control of the axle lift, fully automatic, load-dependent. Starting aid: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). 18330.701 Manufacturer of choice: Kögel - three-axle unit, with disc brakes Ø approx. 430 mm, installation depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires L20520.010 Wheels with internal sensors according to UN ECE R141. 20540.040 Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J). Chassis Components I 20110.012 JOST landing gears, mechanical with compensating foot, approx. 24 t lifting capacity. One-sided operation on the right side in the direction of travel. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5-inch tires consisting of: 3 pairs of semi-circular fenders with splash flaps. 21300.001 2 chock blocks with holder. 27510.130 Rigid rear underrun protection made of steel according to ECE-R58, in a bolted design. Braking / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket connection ISO 7638, (without connecting cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 socket connection. I 32125.015 WABCO EBS system. 33420.070 Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit. 34320.001 2 non-interchangeable coupling heads at the front ISO 1728. 34410.010 Air tank for brake system and air reserve made of steel (EN 286-2). Gjdpfx Aiez N Nw Tjvokc Rear Impact Protection 42551.040 Solid steel rear impact protection on the rear end crossmember. Electrical / Electronics 60500.055 Lighting carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED outline lights and reflectors at the front. - Flashing LED side marker lights. - Superseal and bayonet connections for the lights. I 61910.120 2 LED multi-chamber tail lights with integrated LED outline lights with arm. K64100.932 Adapter spiral connecting cable (4m) from 15-pole socket to 2x7-pole plugs. Does not comply with ADR regulations! 64300.017 Front socket connection, 15-pole ISO 12098 (without connecting cables). I 65250.152 2 LED reversing lights (manufacturer of our choice) mounted on the rear end crossmember. The operator must ensure sufficient electrical protection of the towing vehicle (ISO 12098 Pin 8, ISO 3731 24V-S Pin 3). K 68000.993 Complies with vehicle class EX/II, EX/III, FL, AT. Information Systems L69100.073 Tire pressure monitoring system according to UN ECE R141. Signage I 71100.030 1 hazardous goods sign, neutral

Condition: used, first registration: 02/2017, color: other, Year of construction: 2017, Axle 1: left mm right mm Axle 2: left mm right mm Axle 3: left mm right mm Gkjdpsza D Drefx Aivjc We have the possibility to stack trailers!

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 05/2027, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Regular ladder frame in lightweight steel construction with continuous crossmembers * With extended chassis frame * Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337 * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120 * Air suspension with approx. 180 mm travel Tires: * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5 UNIROYAL TH 506, steel rims 22.5 x 11.75, offset approx. 120 mm * Chassis components: * Mechanical landing gear with leveling foot, approx. 24 t lifting capacity, single-sided operation on the right side * Storage box for: 10 side panels, folding stakes, and rear flap, completely enclosed, protected against spray water, and simultaneously serving as lateral protection * 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right Braking / Air Suspension System: * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connector ISO 7638 (without connecting lines) * Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit * Driving position is automatically adjusted * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for braking system and air reserve made of steel (EN 286-2) Floor: * Plate floor approx. 30 mm thick, multiple-ply glued plywood * Floor sealed around the perimeter * Pocket for square tube inserts approx. 80 x 80 mm Front wall: * Storage for max. 14 square tube inserts approx. 80 x 80 (length 1,990 mm) on the inside of the front wall * Approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * N o t e: When using the front wall for securing the load, suitable lashing straps must be used for tensioning if the vehicle is operated without side panels and a rear flap Rear wall: Gedpfxoy Trwuo Aivokc * ATTENTION: Hinge mount for folding rear wall 600 mm as well as stake mount for folding corner stakes at the rear, however, the folding rear wall and corner stakes at the rear are OMITTED. Side wall: * VarioFix steel outer frame, 4 pairs of stake mounts for folding stakes on the outer frame (evenly distributed), WITHOUT folding stakes, pair of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring. Side panels: * ATTENTION: Hinge mount for 5 pairs of side panels on the outer frame as well as side panel stop mounted on the corner posts at the front, however, the 5 pairs of side panels are OMITTED. Electrical system / Electronics: * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights * 2 LED outline lights with pendulum bracket * 2 multi-chamber tail lights *

Condition: used, axle configuration: 3 axles, color: other, Year of construction: 2015, Empty weight: 5.420 kg Gkodpfx Aioza D A Uovoc Axle 1: left 10 mm right 10 mm Axle 2: left 12 mm right 12 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, maximum load weight: 35,460 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 07/2021, loading space length: 13,300 mm, loading space width: 2,430 mm, loading space height: 2,500 mm, loading space volume: 83 m³, Equipment: ABS, Kögel Port 45 BDF Multi Chassis Reefer Container Carrier Bi-Temp. Internal No. for inquiries: 0226131 * Overall condition: very good * ABS * First registration: 07/2021 * Multi Chassis * 3-axle, air-suspended * BPW axles * Drum brakes Reefer container Tonglee Internal No. for inquiries: 0226132 * Refrigeration unit: Carrier - Vector * Bi-temperature * Partition on the left/right Dimensions of cargo space/loading area * Length of cargo space: 13,300 mm * Width of cargo space: 2,430 mm * Height of cargo space: 2,500 mm Tires: * 1st axle: 385 / 55 R22.5 30% air-suspended * 2nd axle: 385 / 55 R22.5 30% air-suspended * 3rd axle: 385 / 55 R22.5 30% air-suspended ----Price: ,- Euro + 19% VAT Godezch Hiepfx Aivokc For further questions, you can reach us at the following telephone numbers: We speak: German, English, Polish, French, and…? Typographical errors, errors and prior sale are subject to change.

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 Gkedpfx Aozz Umxjivsc * for three-axle unit with 385/65 R22.5 tires * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stanchio

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2008, next inspection (TÜV): 07/2025, loading space length: 13,450 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2008, Equipment: ABS, * KÖGEL 3-axle * Standard box semi-trailer * Second-hand (from Germany) * BPW-ECO-Plus axles Gksdpfxjzb T Hfe Aivoc * Air suspension * Double-deck * Roll-up rear door * Tires: 60-80% (385/65 R22.5) * Dimensions: L-13.450 W-2.480 H-2.600 mm (internal) * Color: White with lettering, chassis black * etc. Please, no emails, only phone calls! Subject to prior sale and errors! Functionality of extras not guaranteed! We also speak: ENG / ITA / HR / SRB / BiH Your contact: Ludvig Kozuha, Mobile WhatsApp, Viber Over 20 years of experience in the buying and selling of commercial vehicles! - RELIABLE & FAIR - Former DAF contract partner!

Condition: used, empty load weight: 5,740 kg, maximum load weight: 33,760 kg, overall weight: 39,500 kg, first registration: 05/2021, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, electronic stability program (ESP), Kögel Multi Container Chassis Port 45 Triplex - Port 45 Triplex - manual front extension, center extension, and pneumatic rear extension - ISO for 45' or 40' High Cube - 45' Euro / Long - ISO 30' - ISO 40' / HC - ISO 20' - ISO 2 x 20' Gsdpfx Aiezti Twovokc - ABS/EBS - SAF axles - Tires: 385/55R22.5 Very good condition! German vehicle! Export price! Errors and prior sale excepted. All information without warranty. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders; therefore, our advertisements generally include the export price, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and does not replace detailed individual advice for making purchasing decisions. Only the provisions contained in the purchase contract are decisive. Changes, errors, typos, and prior sale are excepted. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: new, maximum load weight: 35,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction with through-running crossmembers, with chassis frame extension. * Coupling plate approximately 8 mm thick * with a 2-pin kingpin according to DIN 74080 / ISO 337 Suspension * For indivisible loads, an increase in the total permissible weight is permitted. * Axle lift mechanism on the axle * 1 automatic axle lift control, load-dependent * Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h * Manufacturer of your choice: Kögel Three-axle unit * with disc brakes Ø 430 mm * Embedding depth approximately 120 mm * Air suspension with approximately 180 mm travel. Vehicle tires * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5, AUSTONE ATH155 164K long haul Chassis components * Kingpin supports (manufacturer of your choice from Kögel) mechanically with leveling foot, approximately 24 t lifting capacity * One-side operation on the right side when driving * Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5 * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with splash flaps between the 1st and 2nd axle * 1 pair of quarter-circle fenders with splash flaps behind the axles * Storage box for: 10 sideboards, folding stakes, and rear door/rear flap. Closed on all sides * Protected against spray, also serves as a side protection device * 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installation at the rear, 1x left and 1x right * 1 pair of pull-out warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear area of the vehicle Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as a spring brake, external pneumatic connections, as well as external EBS diagnostic connection via ISO 7638 plug connection * Wabco EBS system * Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving, behind the axle unit * Driving position adjusts automatically Floor * Plate floor approximately 30 mm thick * Recess pockets for square tube inserts approximately 80 x 80 mm, arrangement according to drawing J9 * 8 pieces of recess pocket strips (18 recess pockets per strip: 4 pieces each on the outside + 10 pieces in the middle) * Body meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approximately 27,000 kg Front wall * Storage for a maximum of 20 square tube inserts approximately 80 x 80 mm (length approximately 1,990 mm) on the inner side of the front wall * Front wall approximately 2,000 mm high with steel corner posts, with profiled sheet steel, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640 Rear wall * Hinged rear wall approximately 600 mm made of aluminum hollow profiles with 3 tension rods and T-bar locking Gkedpfezrkbgex Aivoc * 2 folding steps on the inside. Hinged steel corner posts at the rear, at

Condition: used, first registration: 12/2010, Year of construction: 2010, Schwarzmüller short ADR 3-axle container chassis for special acid containers • ABS • Air suspension • 3 x Mercedes - 9 ton axles • 1st axle liftable • Lifting/lowering device • Tires: 385/55 R 22.5 • Unladen weight: 3,650 kg • 36,000 kg gross vehicle weight (39,000 kg technically possible) Gedpfewmn U Aex Aivskc • Dimensions: 8,200 x 2,550 mm - German trailer - TÜV / HU / SP available upon request and at an additional cost: new! Subject to errors and prior sale!

Condition: used, axle configuration: 3 axles, first registration: 07/2008, color: other, Year of construction: 2008, Number of axles: 3, Unladen weight: 6150 kg, Gross vehicle weight: 41000 kg, Suspension type: Full air suspension = Further information = General information Cab: Day cab Registration: KLEYN1 Technical information Fuel type: Diesel Transmission: Manual gearbox Weights Unladen weight: 6,150 kg Payload: 34,850 kg Gkodpfxez Rvt Ro Aivoc GVW: 41,000 kg Environment Emission class: Euro 0 Condition Overall condition: very poor Technical condition: very poor Optical condition: very poor Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more… Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 11/2003, suspension: air, tire size: 385/65 R 22.5, Year of construction: 2003, Equipment: ABS, = Additional options and accessories = - Lifting axle - Air suspension = Further information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth, left: 25%; Tire tread depth, right: 25% Rear axle 2: Tire tread depth, left: 20%; Tire tread depth, right: 20% Rear axle 3: Tire tread depth, left: 30%; Tire tread depth, right: 30% Weights Unladen weight: 5,550 kg Payload: 37,450 kg GVW: 43,000 kg Condition Damage: None Godpfszntr Tsx Aivjkc Identification License plate: OH-74-JB

Condition: used, Year of construction: 2020, Slider length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut ruler display: scale Crosscut ruler with miter function: yes Gkedpfx Aioz A D Uxevoc Saw blade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 1200 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Gkjdpfx Aioywzq Ssvsc Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: used, axle configuration: 3 axles, first registration: 07/2008, total length: 11,400 mm, total width: 2,450 mm, total height: 1,500 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6150 kg, Gross vehicle weight: 41000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2008, Steering: 2x20 + 1x30 + 1x40 + 1x45 high cube, Extendable chassis: Front / Rear = Additional Information = General Information Cabin: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Gkodpfoz N Sqvex Aivec Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 2 mm; Tire tread depth right: 4 mm Weights Tare weight: 6,150 kg Payload: 34,850 kg GVW: 41,000 kg Functional Loading platform height: 112 cm Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2004, Carriage length: 2250 mm Cutting width at rip fence: 1040 mm Cutting width at crosscut fence: 2900 mm Cutting depth: 154 mm Scoring unit: yes Saw blade height adjustment: electric / position control Saw blade tilting adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: digital readout Crosscut ruler with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 2200 mm Gedpfxjy Ai I No Aivskc Machine width: 2000 mm Weight: 1200 kg

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2004, Empty weight: 5.300 kg Axle 1: left 10 mm right 10 mm Gedpjym Aimsfx Aivokc Axle 2: left 8 mm right 8 mm Axle 3: left8 mm righ 8 mm We have the possibility to stack trailers!

Condition: used, machine/vehicle number: NP8FA99W3N0000319, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, total length: 12,890 mm, total width: 2,550 mm, total height: 3,660 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 60 %, color: red, #Vehicle Data - Make: Özgül - Model: F - First registration: 08.09.2022 - Colour: RAL 3020 red - Vehicle class: Semi-trailer - Product group: Container chassis semi-trailer - Number of axles: 3 - Running gear: Wheels (385/55 R22.5") - Chassis height: 135 cm #Weights and Dimensions - Gross vehicle weight: 39.000 kg - Payload: 32.180 kg Gkjdpfjzyf Tgsx Aivoc - Kingpin load: 12.000 kg - Vehicle length: 12.890 cm - Vehicle width: 2.550 cm - Vehicle height: 3.660 cm - Unladen weight: 6.820 kg #Body-specific Information - Vehicle type: Container chassis semi-trailer - Container sizes: 1x40 ft, 2x20 ft, 1x30 ft - Internal loading length: 11.985 cm - 2x landing legs front and rear (painted black) #Axles and Tyres - Axle make: SAF 9 Ton CD Off-Road - Tyres: Single tyres - Axle load, axle 1: 9.000 kg - Axle 1: Lift axle - Brakes, axle 1: Disc brakes - Tyre size, Bridgestone brand, 385/65R 22.5" - 1x spare tyre, Bridgestone brand (385/65 R22,5") #Braking System - WABCO EBS (2S/2M) with RSS in accordance with EC Directive, ADR-adapted - Compressed-air brake cylinders: 2 axles with 4 combined brake cylinders (tristop/spring brake cylinders) - 1 axle with 2 diaphragm brake cylinders (service brake cylinders) #Electrics - 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate light - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable - 1 additional LED work light at the rear, switched via reversing light #Cylinder - Manufacturer: Hidromas - Model/type: GHS 175-5-9125 H-Typ - Number of stages: 5 - First-stage diameter: 175mm / total stroke: 9125mm - Operating pressure (working pressure): 170 bar - Max. operating pressure: 190 bar - Cylinder material: ST 52 (E355), cold-drawn precision steel tubes #Accessories - 2x wheel chocks with holder - 2x side impact protection, aluminium - Rear underrun protection - 6x half-shell mudguards with 6x small anti-spray flaps and 1x large - 1x fire extinguisher holder - 1x water tank (60l) - 4x lashing rings - 2x warning reflectors, at the rear and on each side

Condition: used, machine/vehicle number: NP8FA99W3N0000318, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, total length: 12,890 mm, total width: 2,550 mm, total height: 3,660 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 60 %, color: red, #Vehicle Data - Make: Özgül - Model: F - First registration: 08.09.2022 - Colour: RAL 3020 red - Vehicle class: Semi-trailer - Product group: Container chassis semi-trailer - Number of axles: 3 - Running gear: Wheels (385/55 R22.5") - Chassis height: 135 cm #Weights and Dimensions - Gross vehicle weight: 39.000 kg - Payload: 32.180 kg - Kingpin load: 12.000 kg - Vehicle length: 12.890 cm - Vehicle width: 2.550 cm - Vehicle height: 3.660 cm - Unladen weight: 6.820 kg #Body-specific Information - Vehicle type: Container chassis semi-trailer - Container sizes: 1x40 ft, 2x20 ft, 1x30 ft - Internal loading length: 11.985 cm - 2x landing legs front and rear (painted black) #Axles and Tyres - Axle make: SAF 9 Ton CD Off-Road - Tyres: Single tyres - Axle load, axle 1: 9.000 kg - Axle 1: Lift axle - Brakes, axle 1: Disc brakes - Tyre size, Bridgestone brand, 385/65R 22.5" - 1x spare tyre, Bridgestone brand (385/65 R22,5") #Braking System - WABCO EBS (2S/2M) with RSS in accordance with EC Directive, ADR-adapted - Compressed-air brake cylinders: 2 axles with 4 combined brake cylinders (tristop/spring brake cylinders) - 1 axle with 2 diaphragm brake cylinders (service brake cylinders) #Electrics - 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate light - 2 white LED front position lights Godpfx Aijzyf Uqjvekc - 2 white/red LED rear outline marker lights - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable - 1 additional LED work light at the rear, switched via reversing light #Cylinder - Manufacturer: Hidromas - Model/type: GHS 175-5-9125 H-Typ - Number of stages: 5 - First-stage diameter: 175mm / total stroke: 9125mm - Operating pressure (working pressure): 170 bar - Max. operating pressure: 190 bar - Cylinder material: ST 52 (E355), cold-drawn precision steel tubes #Accessories - 2x wheel chocks with holder - 2x side impact protection, aluminium - Rear underrun protection - 6x half-shell mudguards with 6x small anti-spray flaps and 1x large - 1x fire extinguisher holder - 1x water tank (60l) - 4x lashing rings - 2x warning reflectors, at the rear and on each side

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Model: FP1 Machine no.: 2102-3314 - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes - Vertical milling head - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system - Dividing rotary table with a three-jaw chuck Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Gedoxmgguepfx Aivjkc Price is quoted net, ex-works, loaded. Condition: Used.

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm 25 Euro pallets Gksdpfx Asvzk Naeivoc Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental-----

Condition: used, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2003, next inspection (TÜV): 03/2027, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 93 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2003, Equipment: ABS, 3-axle Kögel SN 24 Standard Tautliner VIN: 717108 Chassis / Components: * Air suspension // Raise and lower * Lift axle * Haacon support legs * 3 x BPW Eco Plus axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front approx. 50/30%, Middle approx. 50/60%, Rear approx. 40/30% * Fifth wheel height approx. 1,150 mm * 1 x PVC storage box Body: * Tautliner Standard * Certificate EN 12642 Code XL * Edscha * Side curtains * Lashing eyes per side Weights: * Gross vehicle weight: 35,000 kg * Tare weight: 6,800 kg * Payload: 28,200 kg Other: * German vehicle * MOT (TÜV) ---- New MOT/technical inspection and weight adjustments (increase or decrease) are available upon request. _____ Gsdpfx Aisz D Ny Aovekc We don't leave you alone even after the purchase: We will assist you in obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and spelling errors, and prior sale. _____ About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just the vehicle that counts, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably – from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! _____ Our service for you: Vehicle loading We will help you with loading your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term license plates We will assist you in obtaining export or short-term license plates. Customs formalities We will also support you with customs matters. Vehicle transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: used, axle configuration: 3 axles, first registration: 05/2024, suspension: air, tire size: 385/55/22.5, color: other, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Further Information = Tire size: 385/55/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Unladen weight: 5,450 kg Payload: 37,550 kg GVW: 43,000 kg Damage: None License plate: OV-48-HS Godpfoz Dpkuex Aivskc

Condition: used, axle configuration: 3 axles, suspension: air, tire size: 385/55/22.5, color: other, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Further Information = Axle Configuration Tire size: 385/55/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Weights Unladen weight: 5,450 kg Gkjdpfez Dpknex Aivsc Payload: 37,550 kg GVW: 43,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 07/2027 Damage: none Identification Registration number: OV-29-JH