Used Ingvar Persson Ab Log Sorting Line for sale (21,583)

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Rema system with measuring frame type 9001 Hydraulic log kickers Nodpjr Hbcfsfx Amnswg

Year of construction: 2024, condition: new, The plant is available immediately ! Nwedpfegvu Alex Amnog - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Nwodpfxjxgt U Ej Amnjg Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,

Condition: used, Hedlund log sorting line 2x19 pockets Manufacturer: Hedlund Nwodpfx Asyudllsmnsg Pockets: 2x19 Year: 1980 Step feeder: Hedlund 2008 Control system: Siemens S7 300

Condition: used, functionality: fully functional, Price with dismantling. Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 1500, ABB580 frequency converters and Finscan 2019 automatic sorter. Drysorter equipped with Dynagrade 2015 (updated 2020). Nwodpfxeyzhvvj Amnog

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Nwsdpfx Amjxmr Rrenog Main layout attached

Condition: ready for operation (used), Semi automatic sorting line with 1 waste pocket and two size pockets. Line is equipped with metal detector Mesutronic. Sorting process is controlled by operator. Fully working line with hydraulic station and electrical cabinet included. Video of working process available by request. Working diameters 100-500 mm Nedpfx Aev Nwrwjmnowg

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Nwedpfx Asxv Arxemnjg Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping Nsdpew Rg Emefx Amnowg - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Sorting line for green sawn timber, 4 horizontal sorting pockets, 4 buffer pockets, trimmer, stacker, operating system Nolyx new in 2018, sorting speed 16000 pcs in 8 hours shift Njdpfx Amotxzhlonjwg

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Nwedpfx Asw Ug Agemnog

Year of construction: 2005, condition: used, functionality: fully functional, NIR device Polysort 2000 from Tomra with a complete sorting line consisting of feed chute, acceleration belt, separator edge and canopy, optionally with additional conveyor belts. Nsdpfxjylzqgo Amnowg

Year of construction: 1996, condition: used, functionality: fully functional, For sale: Timber sorting and packing line. Visual sorting with end-trimming capability. Includes six quality sorting belt bins. Available for purchase in parts. Njdey Edbpspfx Amnswg

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide Nwjdpfxjxf Up Uo Amnjg - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 2025, condition: new, 1) Climb - conveyor, with hopper: 1 pcs. The length of the conveyor: 8000mm, working width: 600mm, Hopper: length 3000mm, width 2000mm, height 1500mm from the ground, EP 400/3 rubber belt with chevron t 16mm sleepers, Transfer speed controlled by inverter max. 0,2 m / s, conveyor belt with STOP safety switch, 2) belt conveyor for sorting 1 piece. Length of the conveyor: 10000 mm, working width of the conveyor: 950 mm, height: 1400 mm to the upper part of the belt. Height: 1500 mm to the upper part of the sides. The sides of the conveyor are made of galvanized steel, the rubber belt EP 400/3 is smooth, the sides of the conveyor 100 mm. A hopper with a height of 600 mm on both sides and a width of 1000 mm. The speed of the conveyor is controlled by an inverter with a maximum speed of 0.3 m / s. 3) Working platform: 6 pcs, platform width: 1200 mm, platform length: 1200 mm, platform height: 500 mm, platform with safety barriers. 4) Loading handles for recyclable materials: 8 pcs, Nedpfsd N Hhusx Amnjwg height: 1300 mm, width: 1300 mm, length 1300 mm, With caster wheels on bearings and handles for fastening big bags. 5) Balast - conveyor on the round axle and two running wheels: 1 piece, The length of the conveyor: 8000mm, working width: 600mm, Hopper: length 1200mm, width 1000mm, height 1000mm above the ground, Ascent height: 3700mm, EP 400/3 rubber belt with 60mm T-steps, 500mm, fixed speed 0.4m / s, conveyor belt with STOP safety switch. 6) Sorting line, out

Year of construction: 2023, condition: excellent (used), Faste NS/100 broccoli sorting line. Condition: very good. Njdpfx Amoyuu Rrsnjwg

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: P251001170, Complete extrusion line for ABS/PP furniture edge banding from the renowned brand AMUT The line is in perfect technical condition, regularly serviced, and currently in operation. The set includes a spare screw, further enhancing its operational value. Line equipment: 1. AMUT EA 100 extruder 2. AMUT calender station with CLV 1200 roller conveyor 3. AMUT TRK 100 edge banding machine 4. AMUT edge winder 5. Calendar cooling unit with a complete set of hoses 6. Electrical control cabinets for the entire line Njdpfxoxiu Npj Amnswg Material: ABS, PP (virgin + regrind) Working width: 700 mm (after side trimming) Nominal width: 1000 mm Thickness range: 0.5 – 2 mm Extruder: single-screw AMUT EA100 33D Extruder output: ABS: 320 kg/h PP: 350 kg/h Final product: 2 rolls, each 350 mm wide Line speed: up to 25 m/min Year of production: 2009 Technical condition: perfect, complete with spare screw

Condition: good (used), log sorting crane sorting wagon Wolf RSZ 300/12,5 year of construction 1979 with crane Jonsereds type: LONG-JON with crosscut saw with crosscut saw Nodpfsg T S E Tsx Amnjwg with tongs with rails with cable has run to the end, cylinder of gripper belongs sealed Location: Germany, near Passau Visit also my other advertisements. I look forward to your inquiry.

Condition: used, Small log line with Chipper-canters and single blade splitsaw Feeding / sawing speed 60 m/min. The line consist of below parts: - Conveyor for logs - Centring infeeder with log turner - First chipper-canter for round logs - Out feed conveyor Nodpfxsiiciqs Amnewg - Block tilter - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw We can also offer the equipment serviced

Condition: used, One simple combi sorting line with 10 band pockets and a capacity of up to 40 pieces per minute. Nwedpfx Amjxyaivsnog

Condition: used, Green sorting line Manufacturer: ALMAB Year: 1992 Pockets: 25 Control system: Siemens S7-400 in raw sorter and Rema 9050 Stick handling / robot in raw sorter (ALMAB) with control system Mitsubishi A2N Raw sorter equipped with LIMAB wane detection system Concept / Capacity: Spruce and pine sawn timber, top diameter 14–46 cm, maximum length 6.4 m Main center assortment for KVH production: 60, 80, 100 mm Maximum production capacity: 180,000 m³ of sawn goods per year in two-shift operation Nodpfx Ameyudu Honowg

Year of construction: 1980, condition: good (used), functionality: fully functional, For sale: dry lumber sorting line, fully dismantled and ready for transport. All components have been meticulously marked according to their positions and packed in transport crates to ensure smooth logistics and hassle-free installation. Complete assembly drawings are available, and we are happy to provide further information, photographs, and technical specifications upon request. Please also note that a green (fresh timber) sorting line will soon be available for sale, which can be connected to this dry sorting line if needed, forming an integrated and efficient production system. Specification: Fall Pocket Dry Sorting Line The line includes the following main components: Pos 10. Intake for packages with tilt hoist, destacking, and unscrambler Pos 20. Side conveyor for boards directed to operator for quality inspection Pos 30. Trimmer Nsdpfx Amsytc A Tsnowg Pos 40. “Top” conveyor over the pockets Pos 50. Fall pockets Pos 60. Side conveyor under the pockets Pos 70. Elevators before the packing machine Pos 80. Complete packing machine Pos 90. Press and strapping unit with infeed and outfeed conveyors Pos 100. All existing electrical and electronic equipment related to the line

Condition: new, Jartek dry and green board sorting line Nodpfxex Ddhke Amnswg

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, Renholmen greensorting line 45 sorting pockets, sticking machine with sticks handling and Finnscan + OT-laite, speed is 100 m/min and it is fully automated line with stickhandling one operator, automation is made 2019 Njdjxg Rgxepfx Amnjwg Workpiece length max - 6.100 mm Maximum sorting speed: 130-150 pcs/min Maximum capacity: 260,000 m3/year

Condition: used, Dry board sorting line Nwsdsxyixaspfx Amnjg ⁠Manufacturer: Reinholmen Speed: 90 pcs/min ⁠Pockets: 234 Year of production: 2000 Electric cabinets renovated 2022