Used Ikegai Tnc 75 for sale (7,177)

Condition: ready for operation (used), Manufacturer: Ikegai - Japan Type: TNC 75 Year of manufacture: 1990 Control system: Fanuc 15-T Technical data: - Center height above bed: 750 mm - Center height above floor level: 1380 mm - Swing diameter above bed: 1500 mm Fsdpfx Aozdrm Ija Eopk - Swing diameter above tool slide: 1200 mm - Max. distance between centers: 7000 mm - Bed (width x height): 1500 x 630 mm - Bed, full length: 10,200 mm - Spindle nose: JIS A2 No. 20 - Taper bore of the spindle: Ø 100, taper 1:10 - Diameter of front spindle bearing: 280 mm - Diameter of rear spindle bearing: 240 mm - Speed: 2.5 - 250 min⁻¹, infinitely variable, 2 ranges (H: 10 - 250, L: 2.5 - 60 min⁻¹) - Rapid traverse X-axis: 2000 mm/min - Rapid traverse Z-axis: 4000 mm/min - Rapid traverse tailstock: 2000 mm/min - Travel X-axis: 560 mm - Travel Z-axis: Distance between centers + 200 mm - Tailstock: integrated, rotating center with its own drive and radial force measuring device - Tailstock quill diameter: 260 mm - Taper bore tailstock: MK No. 7 - Tailstock quill travel: 350 mm Condition: Good, functional condition.

Year of construction: 2025, condition: like new (used), Replacement shafts for Lindner Urraco 75 for sale High-quality replacement shafts for a Lindner Urraco 75 shredder are for sale. – Application: Old wood, household and commercial waste – Condition: New / very good condition Fsdpfjzphiisx Aa Ejpk Design: Original Lindner shafts, not replica shafts The shafts are ready for immediate use. The price stated is net. Notes: • Sale is made excluding any warranty or guarantee. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, omissions, or changes to the information. The sale is made exclusively subject to prior sale.

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse Fpjdpjzrmw Dofx Aa Esk - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Fedpfxoua Eu Ns Aa Ejpk Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: ready for operation (used), IKEGAI tool turret, 12-station, outer diameter: 3700 mm (without tool holders), flange diameter: 240 mm, bore diameter: 60 mm, from IKEGAI TURN 25, used, with normal signs of wear, 100% functional. NOTE: Please request a separate quote for packaging and shipping costs! Fodei Ea Ucspfx Aa Espk

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Technical specifications: Manufacturer: ZEVATRON GmbH Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Automatic manipulator for immersing parts Emergency stop button (E-STOP) Port for connecting a fume extraction system Fodpezmap Aefx Aa Espk Operating manual included

Condition: like new (used), Generally overhauled machine Price: 4.500EUR Fsdpfx Aex N Efqsa Eepk Dough mixer With paddle Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 180 liters / 120 kg of dough or 75 kg of flour

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition Fodpfx Aeyxtfwja Ejpk complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: excellent (used), REMS Cut 110-75-50 Fpjdpey Rt Icsfx Aa Ejk

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Fpodpfx Aovyuy Hea Eok Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Year of construction: 2001, condition: good (used), 2 units of axially split spiral casing pumps with motor and baseplate. Last application as a turbine. !!! Performance curves as a pump and as a turbine are included as images !!! Manufacturer: KSB Type: Omega 350-360 A Flow rate: 1728 m³/h Fodpfed Nqi Rjx Aa Eepk Head: 32 m Speed: 1450 rpm Year of manufacture: 2001 In turbine operation: Motor: VEM G21R 280 S4 Power: 75 kW at approximately 20 meters head and 1600 m³/h Voltage: 400 V In pump operation: Required shaft power: 177 kW Required electric motor: 200 kW NPSH value: 6.9 Efficiency: 85.28% Maximum operating temperature: 140°C Speed sensor: Yes !! Price per unit !!

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, The system comes from current production. TECHNICAL DETAILS Screw diameter: 2 × 75.0 mm L/D ratio: 38 D Design: Co-rotating MACHINE DETAILS Control system manufacturer: Siemens Drive power: 180 kW EQUIPMENT 2 dosing units Water bath Granulator Vacuum degassing Segmented screws and cylinder Fsdpsztw Agofx Aa Espk

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection Fpodpoiivgyjfx Aa Eok All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: ready for operation (used), Baldor BSM3R-3-75-B14 servo motor. 20536, serial number: BFDUB7493, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Fpedpfxji D E Aus Aa Ejk

Condition: ready for operation (used), Emod VK50 / 22-75 flat engine, serial number: 7651600, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fodpfx Aoi D Hu Eoa Eepk

Condition: ready for operation (used), Baldor BSM 3R-3-75-B14 servo motor. 20536, serial number: BFDUC9322, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fsdoi D Ez Ejpfx Aa Espk

Condition: new, BEKA Baier + Köppel MZN 12-75 A gear pump, serial number as shown in the photo, unused, 100% functional, scope of delivery as per photos. Fpsdpfxsi D E Iyj Aa Eek

Condition: ready for operation (used), Emod VKN50 / 22-75 flat engine, serial number: 8228009, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fpjdpfxei D Hu Ns Aa Ejk

Condition: ready for operation (used), GMN TSE 75 cdu x 200 high-speed spindle, SP: 12-18-30000 RPM, serial number: R336458, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fsdsi Eaa Hjpfx Aa Eepk

Condition: new, Bosch SPM 75-TD spindle module, serial number, unused, 100% functional, scope of delivery as shown in the photos. Fpedpfx Asi D Ugmja Ejk

Condition: new, Bühler FC-T G 1/2-75-DC-01/250 fluid control terminal with integrated level and temperature monitoring, unused, 100% functional, scope of delivery as shown in the photos. Fpodpei D Ulysfx Aa Esk

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 Fpedpfsiyya Aex Aa Eek 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 Fpjdpfx Aajiyx Uzo Ejk 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Fodpfjztxp Usx Aa Ejpk Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Condition: used, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of Manufacture 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table Size 650 x 350 mm Spindle Taper SK 40 Spindle Speed 40 - 2500 rpm Feeds X, Y and Z axes 0 - 1000 mm/min, stepless Rapid Traverse X, Y axis 4000 mm/min Rapid Traverse Z axis 3000 mm/min Pinol Adjustment Vertical 60 mm Drive Power Spindle Motor 3 kW Mains Connection 400 Volt, 50 Hz - NC path control Heidenhain TNC 124 - Stepless spindle speed control via belt drive with electric variable speed adjustment, spindle speed programmable - Reduction gearbox with 2 gear stages for two speed ranges - Main motor with belt drive via variable gearbox and stepless control via electronic system - Vertical milling head swiveling +/- 90° - Hydraulic tool clamping - Fixed angle table - All 3 axes with ball screw and mechanical handwheels - Control cabinet fixed to the machine Fedpfolvyrbjx Aa Eepk - Coolant tank with pump located beside the machine - Central lubrication - Lighting Space Requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition