Used Hydro Pneumatic Punch for sale (9,400)

Year of construction: 1990, condition: good (used), machine/vehicle number: 8988, Offer 22523 Technical data: - Pressing force at 10 bar: 35 kN - Plunger stroke: 12 mm - Outreach: 95 mm - Installation height: approx. 134 mm - Table size: approx. 230 x 190 mm - Air consumption per stroke: 8.0 l - Air inlet pressure: 6 - 10 bar - Space required: approx. W 520 x H 1450 x D 600 mm - Weight: approx. 100 kg Ledpfx Abok Rugvoyoru - Includes: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). Ledpfsz Duhxjx Abysru The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: like new (used), functionality: fully functional, Year of construction: 2010, total length: 270 mm, total width: 270 mm, total height: 300 mm, Equipment: CE marking, Pneumatic punching machine for aluminium profiles Has been a part of an Elumatic production line and purchased directly from Elumatic. Manufacturer: Santas Mekaniska Model: UP Serial number: SA2010 Year: 2010 Information A pneumatic punching machine designed for fast and precise hole punching in aluminium profiles. Its air-powered operation provides efficient and consistent results for professional production and assembly applications. Dimensions Width: 270 mm Height: 300 mm Lodpfx Ajxyyc Ajbysru Seller’s Comments Fully functional Used in a production line for aluminum profiles

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Lredpoxw Rdfsfx Abysu Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition Ledsu D Tz Uopfx Abysru 3 pieces available, price per piece

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Lodoz Dtbwopfx Abyoru Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Year of construction: 2026, condition: new, Messan P07 - Pneumatic press for hole punching in reinforcement sheet iron - Working system - pneumatic - Opens holes for handle and lock holes Lrsdpjzugwcefx Abyeu - Punching molds are changeable - Maximum thickness of the sheet iron 1.50 mm - Option - special mould for different forms

Condition: excellent (used), CLEAN-MRS Technologies HYDRO POWER 800 industrial pressure washer A professional, industrial-grade pressure washer for cleaning and degreasing mechanical parts, machine components, and metal elements. We offer the CLEAN-MRS Technologies HYDRO POWER 800 industrial pressure washer, designed for thorough cleaning, degreasing, and removal of process-related contaminants from industrial parts. The unit features a closed working chamber made of stainless steel, equipped with a large viewing window and two manipulation openings with protective gloves. The design allows for safe cleaning of components inside the chamber, minimizing the splashing of cleaning fluid outside the unit. The washer is equipped with a cleaning fluid heating system, a pneumatically opening lid, and a pump that enables the cleaning process to be carried out under pressure. Lrsdpfx Ae Adl Tfebysu

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description Lrsdoz S T Inepfx Abyou The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. Lrjdpfezfzagox Abyju By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,928 h, functionality: fully functional, machine/vehicle number: API124918, overall weight: 810 kg, power: 30 kW (40.79 HP), volume flow: 331.2 m³/h, pressure (max.): 10 bar, type of cooling: air, Chicago Pneumatic CPVS 40 variable speed screw compressor – 30 kW – manufactured in 2015 For sale: a well-maintained Chicago Pneumatic CPVS 40 screw compressor. This compressor features variable speed control, allowing it to efficiently adapt to the compressed air demand. The compressor has already been serviced and is ready for immediate use. Ljdozkvb Nopfx Abyoru Specifications: Type: Chicago Pneumatic CPVS 40 Year of manufacture: 2015 Motor power: 30 kW / 40 hp Capacity: 5.52 m³/min Maximum working pressure: 10 bar Voltage: 400 V / 50 Hz / 3 phases Motor speed: 3,555 rpm Weight: approx. 810 kg Operating hours: 29928/27409 Variable speed control Serviced and ready for use This compressor is suitable for industrial applications where a reliable and energy-efficient compressed air supply is required. Optionally available with a new or used compressed air tank.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, 1 used cutting and punching machine Lrsdpfxoz I Uf Ss Abyju Manufacturer: BOGRAMA AG, Switzerland Type: BSM 450/220/15/Plus Year of manufacture: 2006 Machine No.: 232/06 Technical data / Equipment: - Cutting and punching machine - Working width up to approx. 450 mm - Product width up to approx. 220 mm - For cutting, punching and perforating - Punching thickness with Servo-Plus version up to max. 4 mm - Pneumatic connection: max. 6 bar - Robust design for professional use in post-press processing The technical specifications are based on the BOGRAMA data for this machine series; individual values may vary depending on the equipment of the specific machine.

Condition: excellent (used), For sale is a complete, industrial pneumatic press in a workshop configuration, ideal for punching, stamping, pressing, or other assembly processes. The set includes: • a pneumatic column press with a robust, steel construction • a control valve, actuator, and pneumatic distribution system • an integrated control panel with an emergency stop switch • a steel work table with adjustable side guides • a power cabinet, distribution board, and cable routing • a table on wheels with a transport brake Drive: pneumatic power supply Control: solenoid valves, start/stop buttons Power supply: 230 V (electrical system integrated into the base) Lodpfxjz Sawdo Abyjru Technical condition: very good. Used, fully functional set ready for operation in a workshop. Industrial design, not for amateur use.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, BOGRAMA Punching Machine – Multi BSM 450/220/15 - Manufacturer: BOGRAMA AG, Switzerland - Type: BSM 450/220/15 - Year of Manufacture: 2002 - Machine No.: 038/02 - Working Width: max. 450 mm - Performance: up to approx. 12,500 cycles/hour (depending on material and format) - Punching/Cutting Thickness: - Hole perforation: up to approx. 2 mm Lrsdpfx Absz I Ug Aeyeu - Binder hole: up to approx. 5 mm - Cutting: up to approx. 5 mm - Strip steel cutting: material-dependent - Sheet Alignment: pneumatic front and side guides - Cycle Control: via photocell - Compressed Air Connection: 6 bar - Electrical Connection: 3 × 400 V / N / PE, 50/60 Hz - Fuse: 32 A - Applications: Punching, cutting, perforating, and hole punching

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit Lsdjz Nyvyopfx Abysru - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Ledpfxjuzv Tze Abyeru Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Year of construction: 2000, overall weight: 9,200 kg, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Ledpoz Ak Diefx Abysru Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 6151740170, Exhibit: Chicago Pneumatic Air Chisel Hammer GV 5 Strokes per minute: 2400 Stroke: 52.5 mm Chisel shank: Hexagonal 19 mm Air consumption under load: 8.3 l/s Power: 12.2 Joules Weight: 5.1 kg Overall length: 385 mm Air inlet: G 1/2 Ljdpfx Aexwpitobyjru Specifically designed for heavy-duty industrial applications, the GV5 hammer combines powerful blows and an efficient impact frequency with a robust design. Thanks to its metal housing, large stroke volume, and high impact rate, the GV5 offers maximum performance and durability simultaneously. It is therefore ideal for roughening, chiseling, or cutting tasks.

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request. Lredpfxsv Im Nco Abyou

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press Lodpfx Ajtrpiisbyjru No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: good (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 199.2 m³/h, pressure (max.): 10 bar, PROD. - CHICAGO PNEUMATIC TYPE - CPVS25 S/N - ITJ109435 YEAR - 2017 CAPACITY (kW) - 18.5 OUTPUT (m3/min) - at 7.5 - 3.32, at 8.5 - 3.14 , at at 10 - 2.92 CIS (bar) - 10 INVERTER - yes Lrjdpfxerb A Sfj Abyju

Condition: like new (used), functionality: fully functional, Year of construction: 2023, From our demonstration tool inventory, tested and fully functional: New CHICAGO PNEUMATIC CP5080-4200H18K Universal and versatile belt sander set (new & unused) with 3 different sanding arms: Paper belt width: 13 x 457 mm 16 to 19 x 475 mm 3 to 13 x 457 mm Included in the set: Belt sander CP5080-4200H18 1 x protective cover without handle 1 x handpiece 8 x sandpaper 1 x sanding arm 13 x 457 mm 1 x sanding arm 16 to 19 x 475 mm 1 x sanding arm 3 to 13 x 457 mm 1 x carrying case Advantages: The sanding head can be rotated 360° to adapt to the working position Easy changing of abrasives and Low contact Simple and robust design Technical specifications: Lrsdev U Ad Njpfx Abyju - No-load speed: 20,000 - Power: 400 W - Paper tape width: see above under Scope of delivery - Total length: 340 mm - Weight: 1.3 kg Other tools for industrial production and maintenance are available upon request.

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Lsdozcpv Sspfx Abyjru DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control Lredpfx Aoz Duvvobyou ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: good (used), Ram Punch Busch model A Label die cutter Professional machine, German-made. In very good condition. Busch is a market leader in the production of pallet turners and punching machines. 100% functional, ready for production. Technical specifications: Lsdez S Uvmjpfx Abyeru Opening: 300 mm Max. format: 180 x 180 mm Cycle rate: 15/min Stroke length: 200 mm Capacity: 900,000 sheets/h Weight: 600 kg Equipped with a high-speed hydraulic power unit. Features clamps for mounting dies, with axial die adjustment. Feed table adjustable in all planes. Two operating modes: semi-automatic and manual. Includes a delivery tray (stacking tray).