Used Hydraulic Pump For Tunnel Boring Machine for sale (77,978)

Condition: new, functionality: fully functional, Year of construction: 2014, New and unused Adjustable hydraulic pump Manufacturer: Herrenknecht Type: AL A4VS0 250 LR2DY / 30R-V2B250U34 Hodpfxow H Ad Es Abpop Pressure: 270 bar Power: 132 kW

Condition: excellent (used), functionality: fully functional, power: 144 kW (195.79 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 19,300 kg, maximum load weight: 6,800 kg, tire size: 17,5 R 25, Year of construction: 2023, operating hours: 4,092 h, Automation: Telematic system for Wi-Fi/LTE Remote control: Prepared Bucket width: 2,230 mm Fire suppression system: Ansul Checkfire 210D Cab: ISO ROPS/FOPS Engine power: 144 kW / 193 hp Engine: Cummins QSB6.7 EPA Tier 3 / EU Stage IIIA Length of standard machine: 8,705 mm Height with bucket lowered: 1,903 mm Height with bucket raised: 4,298 mm Tipping force, hydraulic: 13,350 kg Tire size: 17.5 R 25 Tipping force, mechanical: 11,700 kg Payload capacity, standard bucket: 6,800 kg Hjdpfszcchuex Abpop Axle load, front/rear: 8,600 / 10,700 kg Weight of empty machine: 19,300 kg

Condition: excellent (used), power: 16,000 kW (21,753.92 HP), fuel type: diesel, overall weight: 14,000 kg, Year of construction: 1998, operating hours: 622 h, output voltage: 400 V, nominal power: 1,600 kW (2,175.39 HP), nominal power (apparent): 2,000 kVA, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, We have a used emergency power generator, or grid replacement system, for sale with the following technical specifications: Condition: Used, fully functional, inspected Engine: MTU 16V396 Generator: AvK Rated power: 2000 kVA / 1600 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V Operating hours: approx. 618 hours (emergency power operation) Hjdpfxeug I U Eo Abpop Year of manufacture: 1998 Open design - Includes batteries - Includes diesel tank - Includes circuit breaker - Includes control system (island operation). - Optionally, against an additional charge, the control system can also be synchronized for grid-parallel operation with load distribution and emergency power operation. Seamless integration into your energy infrastructure. Optionally, installation in a 30 or 40 ft container is possible, against an additional charge, as a compact, ready-to-use unit. Dimensions: 500x180x230 cm (L x W x H) Weight: 12,500 kg The emergency power generator will be delivered in a ready-to-use condition, including a logged load test of 60 minutes. Delivery, installation and commissioning are possible for an additional charge. Price: 80,000

Condition: used, functionality: unexamined, Year of construction: 2010, We offer this used MTS Lovat Mid shield with erector as Pushmodul, 3m tunnel boring machine, year 2010. Manufacturer: MTS Lovat Model: Mid shield with erector as Pushmodul 3m Year of manufacture: 2010 Condition: used Machine type: tunnel boring machine If you have any questions or need more information, please feel free to send us a message or give us a call. Hsdpoy Nm Rbsfx Abpjp

Condition: new, functionality: fully functional, overall weight: 105 kg, Year of construction: 2025, What is controlled jacking? Controlled jacking is a trenchless technology that allows underground installations—such as water pipes, sewage pipes, power cables, electrical cables, telecommunications cables, fiber optic cables, water pipes, and sewage pipes—to be laid without the need for extensive excavation. The jacking machine is hydraulically driven and equipped with a pilot head that can be used to correct the path of the jacking. Thanks to measuring systems, the operator controls the depth and direction of the jacking, which allows for high precision, even with passages several dozen meters long, in situations where accuracy and precise avoidance of obstacles in the terrain are important in order not to damage the existing infrastructure and to safely bypass it. This solution is particularly valued in places where earthworks are difficult or impossible, e.g., under roads, lawns, tram tracks, parking lots, sidewalks, or urban areas. Why use controlled pipe jacking? Controlled pipe jacking is an alternative to traditional excavation, eliminating the need to dig up the surface. This method significantly reduces the time needed to complete the project, lowers the cost of restoring the site to its original condition, and minimizes the impact on traffic and the environment. The most important advantages of controlled pipe jacking technology: - no need to interfere with above-ground infrastructure, - the ability to work under obstacles (e.g., roads, sidewalks, lawns, property entrances, railroad tracks), - reduction of noise, - vibrations, and environmental pollution, - high route accuracy, - quick mobilization of equipment and short completion time, - lower risk of collision with existing installations. - no need to use bentonite slurry, - no spoil during jacking Thanks to these features, controlled jacking is commonly used in the construction of municipal networks, water and sewage connections, gas, fiber optic and cable connections. Application of controlled jacking Controlled jacking is ideal wherever installation is required without disrupting the surrounding area. Hjdpfx Aoxxhzwsbpep The most common applications for jacking machines are: - crossings under roads and streets with heavy traffic, - jacking under railway and tram tracks, - crossings under watercourses and canals, -installations under sidewalks, parking lots, squares, and industrial areas, - connections to properties without digging up the entire area. With the ALUSTEER product, no drilling mud (bentonite) is used, which significantly reduces implementation costs and environmental impact. This technology can be used both in cities and in non-urban areas – wherever precision, speed, and reduced impact are important. Accuracy and direction control Modern jacking machines use sensors that enable continuous monitoring of the head position. The operator tracks the parameters on the receiver and operator tablet and reacts in case of deviations from the planned route. Such solutions ensure: - high precision of the breakthrough, - safety for the existing infrastructure, - repeatability and predictability of results. In practice, deviations from the jacking axis are usually no more than a few centimeters, which is fully acceptable in most projects.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling. Hodox Utd Eopfx Abpep

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Hodov Ng E Tspfx Abpep Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Hodpfx Abexiv Ugspjp Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Hodpsxlfwpofx Abpop Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Hedpfx Abjxliguopop Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: used, Year of construction: 2021, REF: MM6437 1 x Seveo Fluss 2x cyclised pump for Intamac filler, with shut-out valves. Mounted on stainless-steel frame. Model - VM1000B. Hodpfxsza Txxe Abpsp Serial no. - 2450. Date of manufacture - 2021. Overall dimensions - 1130mm long x 450mm wide x 800mm high.

Condition: good (used), Thermographic machine Adana Mo. 318 for relief printing Working width 32 cm. Very good condition, machine ready for operation. Description: Easy-to-use handheld machine: the material for thermography is sprinkled with powder. The material is then placed on a conveyor that passes under the oven to achieve the desired thermographic effect. The conveyor speed is infinitely variable and can be precisely set using a potentiometer. The heating unit can be raised or lowered or even moved forward, depending on the requirements of thermography. The adjustable conveyor speed allows thermography at different speeds and with temperature control. Hsdpfx Abswundaopep Power supply 220 V single-phase

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe Hodpfx Absy Uiyvepep The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. Hjdoq Nd U Hepfx Abpjp When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0-253-05-4317, workpiece height (max.): 60 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, controller model: Powercontrol PC85T mit Woodwop software, TECHNICAL DETAILS Process: horizontal drilling – injecting adhesive – driving in dowels Workpiece length min/max: 20 mm / 1,250 mm Workpiece width min/max: 50 mm / 800 mm Workpiece thickness min/max: 10 mm / 60 mm MACHINE DETAILS Hsdpfjzhm Sgox Abpjp Control system: Powercontrol PC85T with Woodwop software Dowels: 8 mm x 30 mm, 8 mm x 35 mm Voltage: 400 V Frequency: 50 Hz Phases: 3-phase EQUIPMENT Drilling unit: 1 drilling and dowel insertion unit, freely programmable Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical clamping cylinders Double diaphragm pump 1:1

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, TECHNICAL DETAILS Number of upper units: 4 With NC positioning: yes Lateral horizontal units: yes Upper vertical units: yes Hedpfx Abezf Ibwjpsp Horizontal units: yes Number of upper vertical units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control system: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8649

Year of construction: 2020, condition: used, Manufacturer: Hillerslev Model: washing machine for Vemag trollies Year: 2020 Condition: Used Serial Number: 3665A-2020 Stock Number: 3391 Capacity: 40 trolleys per hour Hedpfx Abszgdn Nspsp Heating: direct steam Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 14.5kW Dimensions: 11800 x 1900 x 2650 mm Automatic washing machine for Vemag trollies with wash and rinse section, soap dosing and automatic tote bin turner (in and out).

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Bahco, hydraulic pump hand pump, two-stage -Type: P2508 -Pressure range: up to 80 Mpa / 800 bar -Oil volume: 2.5 L Hodjhmgz Tjpfx Abpop -Quantity: 5x hand pump available -Price per piece -Dimension: 600/145 / H180 mm -Weight: 14 kg/pc.

Condition: used, Used machine Used Ganner Compact 30 line boring machine Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Hodpjwhuh Sofx Abpsp Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION 21 drilling spindles with quick-change system; five quick-change chucks included in delivery Heavy-duty steel worktable; five quick-change chucks included in delivery Patented system for fast and easy adjustment of drilling depth via spiral disc Pneumatic drill head swiveling, allowing drilling in any position between 0° and 90° Fold-down cast iron side stops with round bar guide Side stops easily adjustable and lockable to millimeter scale using magnifier Height adjustment of drill head via counter Two positionable pneumatic clamping cylinders With a spindle center distance of 640 mm, it is possible to process two workpieces of 316 mm width each SCOPE OF DELIVERY Two pneumatic pressure cylinders Five quick-change chucks Two stop rails, each 1.5 m long Four fold-down stops for the stop rails One setting gauge for fine adjustment of the fold-down stops on the stop rails TECHNICAL DATA Dimensions and Weights Worktable length 885 mm Hedpfx Asw I Uqljbpjp Worktable width 332 mm Product length approx. 1015 mm Product width/depth approx. 990 mm Product height approx. 1270 mm Net weight approx. 260 kg Electrical Data Rated input power 1.5 kW Delivered power 1.1 kW Motor duty cycle S3 Connection voltage 400 V Mains frequency 50 Hz Noise Emission Sound pressure level 78.3 dB(A) Pneumatic Connection Working pressure 6 – 8 bar Spindle Maximum drilling width 640 mm Maximum drilling depth at 90°: 65 mm Number of spindles: 21 Spindle distance 32 mm Center distance first to last spindle: 640 mm Spindle spacing sufficient for two workpieces of 316 mm each Spindle speed: 2800 rpm Drill head swivel range: 0 – 90° Maximum workpiece height: 130 mm Extraction Extraction nozzle diameter: 80 mm Including optional accessories: 2 pcs. Additional pneumatic pressure cylinders for MDB 21/23/29 PRO 17 pcs. Quick-change chucks for MDB 21/23/29 PRO 1 pc. Setting gauge for rear fence distance for MDB 21/23/29 PRO 1 pc. Reference pin for line drilling for MDB 21/23/29 PRO Location: Solingen Availability: Immediately

Condition: used, Year of construction: 2023, The machine is ready for demonstration at the warehouse in Blomberg. The machine is ready for painting and is already equipped with 1 Bings Marple 8/25 high-pressure pump (up to 175 bar) and 4 Sames-Kremlin AVX Airmix spray guns. Machine equipped with a changeover valve for quick paint changes lever switchable to up to 3 paint circuits and 1 flushing agent pump (options) The machine is in an Ex-rated version. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width 1,200 mm (1,300 mm) - Single-gun drive - Dry extraction Hsdpfx Abjzf N Thspop - Belt conveyor system - Feed speed continuously adjustable 2–8 m/min - With paint recovery - Gun control PLC, LS - Number of installed paint circuits: 3 - Number of spray guns installed: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pump manufacturer: Binks Maple 8/25 up to max. 175 bar - Includes supply air filter hood - Suitable for water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Volts, Hz 400 / 50 - Color RAL 7035, light gray - Weight 3,100 kg _____ Optionally, we can also provide you with a quote for the installation and commissioning of the system, as well as employee training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please feel free to contact us!

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Still EFG 1.5/5004 -Hydraulic pump: Type Motor: Type GP -14/5.5 80 V 2.0 kW -Dimensions: 345/140/140 mm -Weight: 15.7 kg Hsdpfxezfhxvo Abpsp

Condition: good (used), Hydraulic pump, high-pressure pump -Max. pressure: 500 bar Hodpfxjb A Ibdj Abpjp -Hydraulic connections: 7 -Pressure gauge display up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Condition: used, Year of construction: 2005, Lot consists of: (1) 5-Axis Oil Hole Boring Machining Center Technical Details: X/Y/Z 500/150/765 mm, B-axis rotary table with A-axis unit for part size 630 x dia 190 mm, spindle 8,000 rpm / HSK-63-A, 12-position automatic tool changer (ATC), CNC GE-FANUC 160i-MB, dimensions (LxWxH) approx. 2x4x3 m Hodpfx Asym Snxjbpop

Condition: used, Year of construction: 2002, Used machine Year of construction 2002 table size 580 x 280 mm Drilling table height 800 mm Hodpfjw Naccjx Abpjp Drilling depth 150 mm Drilling length 225 mm with Wescott drill chuck 0-20 mm height adjustment 120 mm Swivel range drilling unit 2 x 45 ° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in handwheel with digital display with 2 speeds 1400 and 2800 rpm with drive unit LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: short term Storage location: Flörsheim