Used Hosokawa Micron B.v. Continuous Mixer And Agglomerator for sale (18,357)

Year of construction: 2021, condition: used, functionality: fully functional, machine/vehicle number: 4601230000, Hosokawa Micron B.V. Flexomix FXD-250 Intensive Mixer / Vertical Mixer – Year of Manufacture: 2021 Psdpfxsyn Nhfo Ampspr Manufacturer: Hosokawa Micron B.V., Netherlands Type: FXD-250 (Flexomix) Machine Number: 4601230000 Year of Manufacture: 2021 Condition: Used, good technical condition Availability: Upon agreement Technical Data – General Empty weight: approx. 950 kg Max. bulk density of product: 0.7 – 0.8 kg/l Product area / housing: atmospheric ATEX: not available (N/A) Temperature Ranges Ambient: 0°C to +40°C Storage: -10°C to +60°C Operation: Product area: 0°C to +75°C Housing: 0°C to +65°C Liquid supply: 0°C to +75°C Design: Product area: up to 80°C Housing: up to 70°C Liquid supply: up to 80°C Pressure Design pressure: Product area / housing: atmospheric Liquid: 5 barg Operating pressure: Product area / housing: atmospheric Liquid: 4 barg Nozzle Configuration 1 liquid system 4 nozzle holders (2 nozzles each) 8x standard HMBV nozzles Max. air consumption (nozzles): 120 Nm³/h Power and Media Connections Power supply: 3x 400 V AC / 50 Hz Control: 24 V DC Machine protection rating: IP55 Network type: TN-S Compressed air / nitrogen: 7–8 bar(g), clean, dry, oil-free Max. total air consumption: 149 Nm³/h Nominal current: 27 A Drive Manufacturer: Siemens Type: 1LE1603 Power: 15 kW Speed: 3000 rpm Protection class: IP55 Frame size: 160M Insulation class: F Note: Operation above 3000 rpm is not permitted according to manufacturer instructions. Bearings Permanently lubricated bearings, re-lubrication not required Foundation Forces Static vertical force: 9500 N Dynamic vertical force: 2100 N Dynamic horizontal force: 300 N Recommended vibration dampers: 4 pieces, Ø 100 mm, height 55 mm, 65° Shore Application The machine was used for mixing: Glass powder + CaCO₃ + water glass Suitable for high-intensity powder-liquid mixing processes. Scope of Delivery: - Complete mixing unit - Siemens main drive - Nozzle system - Documentation in accordance with FAT (sound level included in FAT document) - GA drawing 4601230201 available A viewing appointment can be arranged upon request. Loading can be organized.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, high-impact mixer (continuous mixer and agglomerator), 45 kW SEW direct drive, feed chute and main shaft made of stainless steel 304, fitted with 4 nozzles made of stainless steel 316, inspection door opening safety switch is missing, documentation available, dimensions 136 x 120 x 309 cm (lxwxh), weight 1728 kg Ppedjuy Tavopfx Ampjr

Condition: used, This listing is for a Hook and Tucker Rotamixer vortex mixer Pedexzhk Rjpfx Ampjpr

Condition: good (used), Year of construction: 2010, functionality: fully functional, Mixer tank with blender, YIT Industrial and Network Services Ltd 2010. 3000L, stainless steel. ABB motor and SULZER gearbox. Siemens 7ML5221-1AA1, SITRANS Probe LU ultrasonic level transmitter monitors level and volume in liquids and slurries. Sprinkler washing system. Drain outlet at the bottom and a tap on the side. Ppedeylpxfopfx Ampor Condition like new with minimal usage. Estimated motor hours: under 100h. Has been used for clay and glaze. Second tank in main picture included in the price, tank only – no motor, etc.

Condition: good (used), functionality: fully functional, Mixing process starts after sucking the air out of the mixer, which also allows the product to keep its natural taste, smell, color and extends its shelf-life. Top cover operated pneumatically. Manufacturer: Inotec Ppsdpfxexxl Ete Ampsr Model: IM-2000 and IM-3000 Height: 2200 mm Width: 2000 mm Length: 4300 mm Capacity: 2000 L and 3000 L Electric power supply: 400V 50Hz 3N Total power: 30 kW (2000L), 35 kW (3000 L)

Condition: ready for operation (used), Suitable for: - Food: fluid and viscous products such as sauces, tomato sauces, pâtés, mayonnaise, ketchup, dressing - Chemicals: pesticides, detergents, fertilizers, herbicides, paints, varnishes - Cosmetics: shampoos, creams, shower gels, oils, lotions Piston filler with 4 volumetric filling heads, with upward dispensing Manual cap placement by operator Automatic capping unit Ppsdoyxpqcjpfx Ampor Incl. 80-liter heated tank with mixer Up to 2,000 bottles per hour

Year of construction: 2019, condition: used, We offer this used Megatrex ATREX CD1000 G600 continuous grinding, mixing and dispersing unit (high-shear rotor system). Manufacturer: Megatrex Oy Model: ATREX CD1000 G600 Serial number: 4255 Year of manufacture: 2019 Condition: used Category ID: 507 Machine type: Continuous industrial mixer / disperser The machine is currently equipped with a 355kW motor and a compatible variable frequency drive. If the buyer plans to install a larger motor, we can also sell the machine without the motor and vfd. The equipment is located in Lohja, Finland, and is currently not connected to utilities, i.e., is ready for transport. If you have any questions or need more information, feel free to send us a message or give us a call. Ppodpfx Aoy Eyv Aempjr

Condition: excellent (used), Continuous mixer M-tec D 10 Drive power 2,2 kW Mixer capacity approx. 20 l/min 14 pieces available Very good ready to use condition, directly from production!!! Ppedpjirfp Iefx Amper

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Ppodpfowg Sgcex Ampjr Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2000, condition: used, Drais Mannheim / Lödige CoriMix® CM Continuous Ringlayer Mixer Ppsdpfoh H S Hdox Ampsr Type: K-TT 700 Motor: 55 kW 1500rpm Fully Stainless execution

Condition: used, Year of construction: 2002, machine/vehicle number: 6696301000, Used Hosokawa model 20-MSC-43 nauta conical screw mixer. - Working volume: 1700 litre. - Working pressure: Atmospheric. - Product contact parts: Stainless steel 1.4301. - Cone has dimensions (approx.): 2048 mm diameter x 2820 mm cone height / 3523 mm total height (bottom edge of discharge valve - drive). - Top semi-circular covers: 1x hinged cover with safety mesh, 1x bolted cover with flanges DN200 and DN100 - Non-supported screw agitator: driven by 5.5 kW electric motor, final rpms of screws 70 rpm - Arm: driven by 0.55 kW electric motor, final rpms of arm 1.2 rpm - Includes: discharge valve. - Mounted: (3) lugs. Pjdpox R S Tkofx Ampspr

Condition: new, Powder dissolver New condition, stainless steel construction Used Alfa-Laval LKH 25/190 11kW --> Excellent condition centrifugal pump Capacity Up to 65,000 l/h --> 9,000 kg/h DN65 couplings Application The powder dissolver can be used in any process where powder is added first and is then dissolved in liquid. Examples: - Powdered milk. - Whey. - Chocolates. - Sauces. - Brines. - Fertilizers. - Lactose. - Stabilizers, mixtures with milk. - Pesticides, etc. Including manual Ppodpfsy D Dvwex Ampjr

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors. Ppjdpfxjvf E Avs Ampjr

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Ppsdpfx Amsviwdmeper Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 Ppodpfx Ajh U Nvkempsr MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Podpfx Amju Dahnepspr Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), Kemper Eco 50 Spiral Mixer For further information please send an message Ppsdpfx Askzkrhsmper

Condition: good (used), Compact coating line - batter dip, pre dust, batter enrober, crumber - all 400mm in to 350mm wide fryer. Has come from a small factory which was set up in 2020 and closed this week 25th March 2026. The factory was producing small products like pasta and chillies filled with cream cheese which was then coated and fried. Video to be added shortly. Psdpfx Aeyxfmyempspr All other machinery also available including Vemag multi head filler and several blast freezers.

Year of construction: 2024, condition: excellent (used), Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control (2024) Pjdpfjyw Tkwox Ampspr Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.

Condition: used, Model: H-600 Serial no: 11-122-116 Operating hours: 17,395 Voltage: 380 V, 50 Hz Ppodeyzzldepfx Amper RPM: 1,425 Power: 1 HP Current: 4.0 A Phases: 3

Condition: used, Double Paddle Mixer Ppedpjym Ui Esfx Amper Inside dimensions: 1000 mm x 750 mm x 650 mm Total dimensions: 1500 mm x 1040 mm x 1770 mm In good working condition Fully Stainless Steel

Condition: used, - Dimensions: 945x1460x1500mm - Dough capacity: 160kg - Flour capacity: 100kg - Bowl capacity: 260L - Year: 2022 - Serial No.: 000021967 - 2 speeds Ppjdpew Ngfqjfx Ampsr - 2 timers - Electric controls - Voltage: 400V - Power: 7.4kW - Weight: 650 kg - Structure: painted steel frame elevated by 4 adjustable feet. - Bowl, spiral, contrast column, and safety guard made of stainless steel. - Two independent 2-speed motors for the spiral and the bowl. - Motion transmission by pulleys and V-belts. - Bowl push roller.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Pedpfxex Ik Dco Ampopr Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, overall weight: 3,300 kg, Year of construction: 2010, Model: GVZ 3000-D-S Opening width: approx. 2.60 m incl. CW55 adapter plate (e.g. for CAT 345) Psdpfx Aotgpg Ismpjpr

Condition: excellent (used), 1 x Buffalo Planetary Mixer Type: GL191 20litres Supplied with whisk Capacity 5kg Flour & 7.5kg Dough Capacity Dimensions: 794(H) x 558(W) x 558(D)mm Three speeds: 97, 220 and 316rpm Ppodpfx Amjyr Hzqepor Voltage 230V (Plugs into a normal plug)