Used Hokutech Hoku 119-90 for sale (10,969)

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage compression mobile piston compressor The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, Dcsdsvl Ev Ajpfx Ahgei better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 674 l/min., filling capacity 505 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1 , Engine power 4 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, filling capacity at 6 bar approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, motor 400 volts, 50 Hz, 4 kW with Condor pressure switch and pressure gauge, incl. pre-filter, refrigeration dryer (230 volts), automatic boiler drainer (230 V), and oil/water separator, Djdpfx Ahswgcb Djgeci bolted on a safety pallet with rubber vibration mounts, available for immediate delivery from our Seevetal location, excluding transport, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, Dcsdpfxovl Euxj Ahgei engine power 3 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2025, Technical Data: Dcodohk Dfkspfx Ahgoi Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Universal piston compressors with belt drive and high-quality features. Djdpfer Ig Ahjx Ahgoci Pressure vessel manufactured according to German AD 2000 regulations. Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, machine/vehicle number: L24110255, HoKuTech band saw HoKu BS 640 AS with lower and upper "blue Gruber guide" Work table dimensions 600 x 885 x 840 mm, Dodpfx Ahjvmw Ugogeci Flywheel D = 640 mm, max. cutting height 400 mm, max. cutting width 620 mm, Inclination of the work table 0° - 20°, Band saw blade length 4,770 - 4,810 mm, Band width 8 - 35 mm, Motor 2.2 kW (3 HP), Extraction nozzle 2 x D = 120 mm Dimensions 1,050 x 720 x 2,180 mm, Weight approx. 300 kg, from the Seevetal location, as viewed, without transport, subject to prior sale

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Dodpjrd Aczofx Ahgsci -Tool: for press brake, 8 pieces -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos -Dimension: 80 x 119 mm -Total length: 835 mm / 1x 400/200/100/50/40/20/15/10 mm each -Total weight: approx. 22 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 3 parts -Tool angle: 90° / 3 mm flat Djdpfxerd Adbs Ahgoci -Dimensions: see drawing in the photos -Dimension: 75 x 119 mm -Total length: 2505 mm / 3 x 835 mm -Total weight: 63.2 kg

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Dcsdpovvi Anjfx Ahgsi Storage location: Supplier

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed Djdeutmw Hspfx Ahgeci 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Maximum cutting height with 450 mm saw blade: at 90°: 155 mm, at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Extraction ports D = 120 + 80 mm Mitre fence extendable to 3,600 mm Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment Motors: Main saw: 5.5 kW / 7.5 HP, Scoring unit with motor: 0.55 kW / 0.75 HP Sliding carriage made of anodized aluminium, including high-precision linear guide made of hardened and ground steel Sliding carriage lockable in any position Saw blade guard with swing-away device Outrigger arm with adjustable mitre fence and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices in accordance with CE standards Dcjdpfx Ahowz Nbaegei As inspected, ex location Seevetal, without pre-freight, freight, or commissioning. Subject to prior sale.

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Dcjdpfxjvyp Avs Ahgsi Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: new, Power 15 KW Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 ber of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238 Dedpfsvwfhcsx Ahgsci

Condition: new, p 450 ax for panel materials including: Programmable sawblade height adjustment Programmable sawblade pivot adjustment Dedpfxjwl N Tws Ahgjci Programmable parallel stop adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP General features of the p 450: Sliding carriage made of anodized aluminum, including high-precision guide made of hardened and ground steel Sliding carriage lock in any position Sawblade guard with pivoting mechanism Extension arm with adjustable angle stop with length compensation at 10°, 15°, 22.5°, 30°, 45°, and 90° Belt adjustment for speed changes from above (opening in the saw table) Display for the set sawblade speed Electrical system and safety devices in accordance with CE standards Technical specifications Specifications: Sawblade tilt: 0° to 45° Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at the parallel stop: 1,100 mm Max. cutting height with a 450 mm sawblade: 90°: 155 mm / 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP 2 extraction nozzles Extendable angle stop to 3,600 mm

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Dcsdpfoyw Thvox Ahgsi Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Location: Rieth

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet Dodpjwx Aadofx Ahgeci including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Dcodpfx Aowd U U Dshgoi Location:

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Dedevg Iqxjpfx Ahgoci Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Extended machine accessories Insertion aidLoop bridge

Condition: new, - NEW -DESCRIPTION- Heavy-duty design with high dead weight for maximum running smoothness- Particularly quiet and precise running thanks to torsion-resistant machine housing- Cast flywheels with rubber coating and cleaning brush- 3-roller precision saw blade guide as standard at top and bottom- Large cast iron saw table, swivels from 0° to 15° with ground and polished surface- Large cast iron parallel fence with round bar guide, easily adjustable- Saw blade tension indicator- Precise cutting height adjustment via toothed rack with millimetre scale- Self-braking motorAvailable on request- Version with cutting height up to 1650 mm- Other special versionsTable, motor and switch must be assembled on siteTECHNICAL DATADimensions and weights- Length (product) approx.1050mm- Width/depth (product) approx.720mm- Height (product) approx.2180mm- Weight (net) approx.320kgSuction connection- Suction nozzle diameter2 x 120mmWork table(s)- Work table length 885mm- Work table width 600mm- Work table height 840mm- Work table inclination 0 - 20°Electrical data- Supply voltage400V- Mains frequency50Hz- Output power2.2kWCutting ranges- Cutting height max. 90°400mm- Cutting width max.620mmSaw blade- Saw blade speed(s) 1630m/min- Flywheel diameter 640mm- Saw blade length 4780mm- Saw blade length min. 4770mm- Saw blade length max.4810mm- Saw blade thickness 0.5 - 0.6- Saw blade guide Precision guide top and bottomOrder number: 5152164 Dcjdpfxsvwfvae Ahgsi

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1190 mm Dodpfxjzg Ur Eo Ahgjci -Cross-section: 120 x 45 mm -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1360/600/H125 mm -Weight: 146 kg

Condition: ready for operation (used), Rexroth HDS03.2-W100N-HS12-01-FW controller, MNR: R911190010, SN:291389-04261, controller has been factory overhauled by the manufacturer, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dedex Dw S Nopfx Ahgjci

Condition: ready for operation (used), Siemens 6FX1190-3AA00 SINUMERIK MS250 E Stand 00 SN:250272, used, normal signs of use, 100% functional, scope of delivery as per photos Dcodpfxsxagrqj Ahgoi

Condition: ready for operation (used), Siemens 6FX1190-7AA00 SINUMERIK MS250 A E Stand 2 SN:SN:250458, used, normal signs of use, 100% functional, scope of delivery as per photos Dodpfsxagrwox Ahgjci

Condition: new, Siemens 1FT5032-0AC01-1 - Z AC-VSA motor SN:EDN61190701001, Z= G45: holding brake installed, G51: prepared for encoder system, unused with storage marks, 100% functional, scope of delivery as per photos Dcsdpfx Aheuzrirogei

Condition: ready for operation (used), Siemens 6FX1190-3AA00 MS 250 Module E Stand B used 100% functional Dcedpfx Ahjxagrkogsi